Categories

Best Speed Drill Bits

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 2 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 280 In-lb Torque, 18 Position and 22pcs Drill/Driver Bits

  • 【20 Voltage & 2 Variable Speeds】Higher voltage means more torque-spinning strength to overcome resistance. 2 variable-speed ( 0-350 & 0-1350 RPM) power drill with an adjustable clutch gives you versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed for drilling holes..
  • 【18+1 Position Clutch & 280 In-lb Max Torque】 The drill's clutch gives a user more control over the amount of torque applied to a screw to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 18 Torque allows for various tasks and additional 1 torque for drilling..
  • 【2 x 1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator let you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
  • 【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits on your purposes. LED Light for increased visibility in enclosed ....
Check Stock

Greenworks 90 Piece Impact Rated Driving Set

  • SET INCLUDES: (21) 135° Split Point Black Oxide Drill Bits，(4) hex shank spade bits，(8) Hex Shank Nut Setters，(1)Magnetic Bit Holder, (27) 1 in. Insert Bits，(4) Drill Stops, (1) Countersink, (1) Center Punch, (1)Hex Key, (6) 2 in. Power Bits, (5) Carbide-tipped Masonry Drill Bits, (5) Black and Silver Brad Point Drill Bits, (4) Hole Saws, (1) Hole Saw Mandrel, (1) Carrying Case..
  • VERSATILE: Suitable for drilling wood, metal, plastic, and masonry..
  • CONVENIENT STORAGE: The plastic carrying case comes with a locking system and labeled compartments to keep your bits organized..
  • MAGNETIC BIT HOLDER: Magnetic bit holder holds drill bits for driving fasteners..
  • BLACK OXIDE FINISH: Provide superior durability and up to 50% improved lifetime compared to standard high-speed steel drill bits. They also reduce friction, giving you improved hole boring speeds..
Check Stock

3-Speed Cordless Mini Drill Pen With 8 Small Drill Bits,Rechargeable Electric Hand Drill Pin Vise,Resin Drill Kit For Jewelry Making,Resin,Plastic,Wood,Keychains DIY

  • Unique Electric Drill Pen: The New design electric power drill will release your hand from manual hand drill,it can use 30 minutes after full charging. Its textured aluminum pen body,Non-slip grip offer compact and comfortable using experience..
  • 3-Speed Adjustment: the Rotary micro drill pen equips with qualify motor. 3 position adjust rotation speed from 5000rpm, 10000rpm to 18000rpm,different speed will be suitable for different material you need to work..
  • Useful Bits Accessories:we equip 8 different size of drill bits(0.8,1.0,1.2,1.3,1.5,1.8,2.0,2.2),They made of Ti-plated high-speed steel, much harder and more durable. Additional 3 small saw blade for occasional cutting requirements..
  • Easy To Use/Carry:All our bits own unified diameter 2.35mm,you just need take the bits to put in jewelry drill pen directly when you want to change bits,But please be careful to avoid scratching your finger by sharp drill bit while changing.In addition, you can take it to outdoor use after full charging..
  • Best DIY Gift: the resin drill set special design for DIY jewelry arts and crafts ,such as ep....
Check Stock

Long Twist Drill, 5Pcs 2-5mm Straight Shank Twist Drill Bit Tool Extra Long Drill Bits Set High Speed Steel Stainless Steel Straight Shank Tool Installer Drill Bit for Drilling Wood

  • DURABLE QUALITY: Twist drill bits are made from high-speed steel for high hardness and durability.
  • PROFESSIONAL DIY USE: Increases cutting speed with self-centering and prevents walking, clears chips and particles faster. They are great for most drilling jobs and materials such as aluminum, wood, plastics.
  • DIFFERENT: Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit. Extra long cutting edge allows you using these bits to drill deep holes.
  • EASY TO USE: Straight shank twists drill has sharps twisted drill bits which make the drilling easier and more effortless, provides better stability and balance during quick operation to ensure position is intact.
  • TWIST DRILL BITS SET: This set includes 5 pieces drill bit in different sizes of the most popular drill bits. Sharp twisted drill bits will make the drilling easier and more effortless.
Check Stock

AVID POWER Drill Bit Set, Drill Bits for Metal, Wood, Masonry-100Pcs Titanium, High Speed Steel Drill Bit Screwdriver Bit Set with Storage Case

  • All-in-one Convenience: The AVID POWER 100-piece drill bit to work on a wide range of projects, this drill bit set is made for wood, metal, masonry, and plastic drilling as well as multiple screw driving and fastening applications..
  • Long Life and Added Durability: High-speed steel titanium drill bits run cooler, drill smoother, and last up to three times longer than your standard drill bit set. Size and dimensions are marked on the drilling surface for easy identification..
  • Widely Use： A wide assortment of bits to face numerous jobs. 14 HSS drill bits, 9 wood drill bits, 9 masonry drill bits, and 56 screwdriver bits in a wide variety of sizes among other tool accessories to create a complete, all-inclusive drill bit kit. great for household and furniture repair..
  • Well Organized: The most popular sizes for common jobs with a storage case, easy to carry. Each drill slot is engraved with the correct dimensions for quick identification and avoids clutter..
  • What's Included: HSS drill bits*14, Wood drill bits*9, Masonry drill bits*9, Screwdriver bits*56, Spade drill bit*3, Hole saws*4, Nut driver bits*4, Countersink*1, Screwdriver bit holder*1.
Check Stock

2 in 1 Corded Electric Hammer Drill 800W | 110V Durable & Lightweight Rotatory Impact Power Drill | Rubber Grip With carrying plastic bag Use For Woodworking Round Whole (28 Pcs)

  • ...to different tasks, the top button can be easily switched to select the hammer & drill function. Hammer function for drilling on the wall and drill function for drilling holes on steel plates and wood. This hammer drill would be your excellent helper. At the same time, it is also your best choice for gifts..
  • PRECISE SPEED CONTROL: Lock button of the impact drill enables you to lock the speed without a constant grip on the trigger to reduce fatigue. K Nakasaki hammer drill has a variable speed switch with 17 dials knob allowing free speed adjustment, you can screw with low gear and drill with high gear..
  • POWERFUL & LIGHTWEIGHT: K Nakasaki hammer drill has a copper powerful motor (820W), providing 30% more power to easily drill.
  • voltage(90V~120V), 7.5Amp, lightweight (2kg), compact size (31 * 25 *7cm). You can set the required speed between 0 and 2800rpm according to your different jobs, delivering powerful impact and hammer strength to complete heavy-duty projects on wood, masonry, solid steel, and concrete which means that most of the work needs can be met..
Check Stock

K Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\

  • ...e Tip, Hardness is Higher Than Ordinary Drill, More Wear Resistance] Excellent tile drill bits with nice point, make the drilling much more easier, less effort and work with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
  • ☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
  • ☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry drill bit), Higher Efficiency] Custom triangle spear tip solves drill bit wander and slipping. U-shaped groove drill body, the drill body is central ground and anti-rust treatment, so that the drainage is smoother..
  • ☺[15 Years of Industry Experience, Professional Grade Ceramic Drill Bit Used in] General drill, electric drill, hand drill and bench drill, the drill bit can be installed and used. Impact drill is not r....
Check Stock

HNBun 1/32

  • HIGH QUALITY: Mt2 taper drill chuck made of durable high speed steel, corrosion and rust resistance.
  • drill press chuck compatible with impact drill and different power tool electric drill.
  • DIMENSION: Capacity 1/32" - 5/8", Mt2 Drill Chuck Overall Length: 93mm (3.7). Accuracy: 0.005", Chuck Mount : JT33.
  • PROFESSIONAL TOOL: High quality triple grip drill chuck accepts accessories with 1-16mm shanks, securely holds a wide range of twist drill bits, step drill bits, paddle bits.
  • MULTIFUNCTION: Drill chuck adapter suitable for centering, drilling, tapping, reaming operation. For portable, bench or floor type drill press.
  • WARM TIP: The mt2 drill chuck can NOT be used counterclockwise.
Check Stock

YXYL 19PCS Premium Hex Drill Bit Set, Titanium Drill Bits Set, High Speed Steel Hex Shank Drill Bits Sets, Twist Drill Bits Set, Quick Change Drill Bits for Wood, Hss Drill Bit Set 1/16'-1/4'

  • OUTSTANDING MATERIAL: Our industry grade hex drill bit set made of high speed steel with titanium coating. Which increases excellent wear resistance and durability.Hex shank drill bits increases cutting speed with self-centering and prevents walking, clears chips and particles faster..
  • DRILL BIT SIZE: 19pcs titanium drill bits set includes 13 most commonly used sizes: 1.5mm X 2, 2.0mm X 2, 2.5mm X 2, 3.0mm X 2, 3.2mm X 2, 3.5mm X 2, 4.0mm X 1, 4.5mm X 1, 4.8mm X 1, 5.0mm X 1, 5.5mm X 1, 6.0mm X 1, 6.5mm X 1, with 1/4inch / 6.5mm hex shank..
  • QUICH CHANGE: Quick change drill bits set, 1/4 inch hex shank drill bits set well fits all power tools more easily and securely, specially for locking into quick change chuck..
  • MULTIPLE APPLICATION: High speed steel hex shank drill bits sets, titanium technology, with high hardness. Premium twist drill bits set for wood, aluminum, plastic, PVC, etc. Ideal for DIY, home and general building/engineering using..
  • 100% SATISFACTION GUARANTEED:Our team will be responsible for every customers and provide 100% satisfactory service. We are very confident in our hex drill bit set. Please contact us if any issue or inquiry with our products, we will be very happy to solve the problem for you. Just add to your cart now!.
Check Stock

COMOWARE Hammer Drills for Concrete, 1/2 In. Corded Drill, Hammer Drill, Variable Speed 0-3000RPM, Max 48000BPM, Hammer & Drill 2-in-1 Concrete Drill, 6.5 Amp Power Hammer Drills with 10 Masonry Bits

  • ...to 48,000 bpm, allowing the masonry drill bits deliver aggressive drilling performance on brick wall and concrete. Please note that this power hammer drill is not suitable for reinforced concrete walls. Drill mode is suitable for titanium bits or cobalt drill bits drilling on wood, plastic and ceramic tile..
  • PRECISE SPEED ADJUSTMENT & SAFE OPERATION - Variable-speed trigger with rotary dial allows you to control the drilling speed at 0 - 3000 RPM according to your needs. Use the rotary dial to set the speed, then press the trigger to start the drill at the selected speed. It helps the corded hammer drill generate accurate bit starting when removing fasteners or bound bits..
  • 1/2 IN. KEYED METAL CHUCK - This concrete drill is equipped with sturdy and durable metal chuck. The 1/2 in. three-jaw keyed chuck provides more secure bit grip than ordinary plastic keyless chuck. It helps the impact drill deliver stable drilling performance in rugged applications..
  • LIGHTWEIGHT & ROBUST CONSTRUCTION - The hammer drill weighs only 3.3 lbs for reduced fatigue and easy operation. Ball-and-roller bearing construction delivers smooth power transmission and extended tool life. This power hammer drill also comes with a handy 360° locking auxiliary handle and a built-in, q....
Check Stock

amoolo 1/4\ Cobalt Drill Bit(10 Pcs), M35 HSS Metal Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron

  • 【10Pcs 1/4" Cobalt Drill Bits】10Pcs - 1/4”(Dia 6.35mm) x 2-3/4”(Flute Length 69.85mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock

Drill Bits Short Length Threaded Shank Short Series Drill Bit Set 3 Tight Fit Tools 00133

  • Drill bits are made of M7 high-speed steel (HSS), for drilling hard materials.
  • 135-degree split-point, 1/4-28 threads and a 5/16 inch hex adapter for removal of drill bit.
  • Three lengths of drill bits: Longs=2-3/8 inches.
  • Drill bits are black oxided to prevent chip-to-tool welding and corrosion.
  • Drill bits comply with National Aerospace Standard NAS965.
Check Stock

Drill Bits Short Length Threaded Shank Long Series Drill Bit Set 2 Tight Fit Tools 00132

  • Drill bits are made of M7 high-speed steel (HSS), for drilling hard materials.
  • 135-degree split-point, 1/4-28 threads and a 5/16 inch hex adapter for removal of drill bit.
  • Three lengths of drill bits: Longs=2-3/8 inches.
  • Drill bits are black oxided to prevent chip-to-tool welding and corrosion.
  • Drill bits comply with National Aerospace Standard NAS965.
Check Stock