Best 1 2 Hp Motors

M-Y Wedge Motor Support FITS 3-Ram Trim/Tilt Systems

  • Suitable for 2-stroke Motors 7-1/2 HP to 20 HP.
  • Broad Size: 8-1/4" * 10-3/8" (210mm*264mm).
  • Designed for use with power or sail boats.
  • Mounting Size 5-1/4” * 9” (133.35mm*228.6mm).
Check Stock

NEW SCHULZ SINGLE STAGE CAST IRON AIR COMPRESSOR PUMP 2, 3 OR 5 HP + FREE FILTER

  • MSL-18MAX SCHULZ INDUSTRIAL GRADE SINGLE STAGE AIR COMPRESSOR PUMP FOR 2HP, 3HP, 4HP AND 5HP APPLICATIONS.
  • 12 MONTH WARRANTY, PUMP SPECIFICALLY DESIGNED FOR 2HP - 5HP 56FRAME ELECTRIC MOTORS RATED BETWEEN 15-20 AMPS, FREE IN-TAKE FILTER INCLUDED.
  • 18 CFM DISPLACEMENT MAX, 42 LB CAST IRON 2 CYLINDER PUMP, MAXIMUM PRESSURE 125 PSI.
  • MANUFACTURERS SUGGESTED RPM 1190, PUMP FLYWHEEL 11.5" OUTSIDE DIAMETER SINGLE GROOVE FOR ONE BELT, 1/2" TOP WIDTH A/4L SECTION BELT. BELT NOT INCLUDED.
  • PLEASE READ DESCRIPTION FOR FULL DETAILS, DIMENSIONAL DATA CAN BE VIEWED ON ATTACHED PICS.
Check Stock

Outboard Rectifier 3 Wires Fits for 1980-2001 Johnson Evinrude 15 60 65 75 85 88 9.9 90 100 110 112 115 140 150 175 200 235 HP, Voltage Marine Regulator 18-5708 583408 582399 580795 581603

  • Voltage Regulator Rectifier Fits for Johnson Evinrude Outboard Motors, Repl. OEM# 580765 580795 582399 583408 581603 582307 580841 581305 583408 Sierra 18-5708. Compatible Models 50HP 1971-1975, 55HP 1976-1977, 60HP 1970-1971, 1986-1991, 65HP 1972-1973, 1989 , 65HP Comm 1984-1991, 70HP 1973-1991, 75HP 1975-1976, 1978-1988..
  • Voltage Regulator Rectifier Fits for :85HP 1970-1983, 88HP 1987-1996, 90HP 1984-1990, 1994, 1996-1997 , 100HP 1967-1968, 1971-1972, 1990, 1994, 100HP Comm 1987, 1990, 110HP 1986-1989, 112HP 1994-1996, 115HP 1969-1970, 1973-1985, 1990, 1994, 1997, 125HP 1971-1972, 135HP 1973-1984, 150HP 1978, 175HP/185HP 1977-1978, 200HP 1976-1978, 235HP 1978, 2.5/2.6 L SEA DRIVE 1982, 1.6 L SEA DRIVE1983 , 2.6 L SEA DRIVE 1983..
  • Brand new Voltage Regulator Rectifier Made of use high quality aluminum, highest grade lamination materials,higher grade of electronic components. Achieves greater stability and reliability than ordinary brands. It will match even exceed OEM parts in compatibility and performance.
  • This rectifier has overheat protection, helps to dissipate excess voltage, prevents over-charging battery, improves heat sink and charging capabilities. Replace a new regulator rectifier can raised your lights brightness, improve the phenomenon of l....
Check Stock

Furnace Draft Inducer/Exhaust Venter Motor Fits Jakel 1172823

  • Multi-speed, constant torque, brushless DC motor.
  • NEMA 48-frame (5. 6 inch diameter) belly band mount with 5-inch long 1/2 inch diameter shaft.
  • Four discrete speeds using 24VAC, plus automatic continuous fan speed.
  • Designed to replace direct-drive blower motors in residential and light commercial indoor furnaces, air handlers and package systems that were designed with a 6-pole 1075rpm rated PSC motor.
  • Replaces / Supersedes: American Standard & Trane MOT13004 , MOT-13004 , MOT12888 , MOT-12888 , MOT12292 , MOT12319 , MOT12542 , Carrier / ICP HD44AE137 , HD44AE137A , HD44AE138 , 1172987 , 1173682 , 5SME39HKL017 , 5SME39HXL285 , 5SME39HXL298 , S81-948 and other 1/2 HP X13 Constant Torque Motors from ALL Major Manufacturers as well as the Azure Digi-Motor # 10800..
  • DOES NOT REPLACE EON , 3. 0 , 2. 3 and 2. 5 ECM Motors.
  • 1/2 Horsepower , 208-230 VOLT , Universal X13 Replacement Motor.
Check Stock

RITE-HITE Stainless Steel Propeller Wrench - Tightens 1 1/16

  • STAINLESS STEEL PROP WRENCH BY RITE-HITE.
  • Designed for OMC motors over 40HP and Mercury motors over 50HP.
  • Compact Size For Just The Right Leverage, Raise Star Washer up on Prop Hub.
Check Stock

BaQiRo Stainless Steel 20hp Outboard Motor Bracket Kicker for Marine Boat

  • With the sturdy design and smooth, spring‑assisted action, it is quick and easy to lift auxiliary or kicker motor..
  • Mounting Size 8” × 8-5/8”, Broad Size: 8-1/4” × 10-3/8”..
  • Full adjustable, 4‑position mounting plate accommodates a wide variety of motor and transom configurations..
  • Fits most style of 2-stroke outboard motors.
Check Stock

Annurssy Brackets & Hinge Assembly for Boat Engine Outboard Electric Trolling Motor

  • Approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern).
  • Works with 0-20hp motors with electric trim and tilt.
  • The Mini Electric On The Fly Jack Plate is easy to install.
  • Our jack plates can be raised and lowered by a up/down push button while on the water within seconds from top to bottom..
  • 3 year warranty on the jack plate housing - 1 year warranty on the electric actuator.
Check Stock

Fe Myers HJ75D Jet, Deep Well Pump, 3/4 HP, Cast Iron

  • Powered by industry standard 2- or 3-wire motors.
  • Thermoplastic discharge and motor bracket.
  • Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP).
Check Stock

LotFancy Go Kart Clutch 3/4 Bore 12T with #35 Chain, Centrifugal Clutch Fit for Go Kart Minibike Honda Engines, With 2pcs Set Screws & 1pc Connecting link

  • 3/4" Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain, Common Clutch for 2-7 HP Engines, Engagement Speed 2300300 RPM.
  • Perfect for Go Kart, Minibike and Fun Kart.
  • Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4 shaft.
  • Also fits any other engines with 3/4 crank shaft and 3/16 key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Package included: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.
Check Stock

Centrifugal Clutch 3/4 Bore 12 Tooth 35 Chain for Go Kart Mini Bike Lawnmower Fun Kart 2-7 HP Engine Fits Honda GX160 GX200 GX140 GX120 GC160 GC19

  • 【Compatibility For】Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Tecumseh....
  • 【Also Fits For】Also compatible with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • 【Replace Numbers】PBH540687. Centrifugal clutch 3/4" bore 12 tooth #35 chain screw sets for go kart mini bike fun kart 2-7 HP engines 2300±300 PRM.
  • 【Recommended Engine】2HP - 7HP, 3/4" shaft with flat key.
  • 【Package included】1*Centrifugal Clutch, 1* #35 Chain, 2*Set Screws and 1*Connecting Link.
Check Stock

BURCAM 101128HZ Submersible Deep Well Pump 1/2 HP 10 GPM 3-Wire + Ground 230Volts

  • Powered by industry standard 2- or 3-wire motors.
  • Thermoplastic discharge and motor bracket.
  • Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP).
Check Stock

Carburetor Carb for Hangkai 3.5HP 3.6HP 2-Stroke Boat Outboard Engine Motor

  • Fitment: for 3.5HP 3.6HP 2 strokes Boat Outboard engines motors.
  • Good working condition and easy to install..
  • Carburetor for Hangkai 3.5HP 3.6HP 2-Stroke.
  • Pre-adjusted carb before shipping, no extra adjustment needed,Replaces existing stock carburetor, just replace and ride again..
Check Stock

The ROP Shop | Power Pack Assembly for 1997 Johnson Evinrude 5 6 8 25 HP Outboard Motors

  • The ROP Shop replacement Power Pack Assembly for 1997 Johnson, Evinrude 5, 6, 8, 25 HP Outboard Motors.
  • Specs - Refer to images 2 & 3 for more information.
  • Fits/For: 1985-2001 (4-60 HP) & 2003-2005 (6-8 HP) engines with a 2 wire timer base NOT requiring an RPM limiter.
  • Uses a 2 wire trigger sensor. Please be sure to check your part or model number to ensure this is the correct switch box for your unit. Also, please....
Check Stock