Categories

Best 1 3 Hp Motors

Carburetor Carb for Hangkai 3.5HP 3.6HP 2-Stroke Boat Outboard Engine Motor

  • Fitment: for 3.5HP 3.6HP 2 strokes Boat Outboard engines motors.
  • Good working condition and easy to install..
  • Carburetor for Hangkai 3.5HP 3.6HP 2-Stroke.
  • Pre-adjusted carb before shipping, no extra adjustment needed,Replaces existing stock carburetor, just replace and ride again..
Check Stock

LotFancy Go Kart Clutch 3/4 Bore 12T with #35 Chain, Centrifugal Clutch Fit for Go Kart Minibike Honda Engines, With 2pcs Set Screws & 1pc Connecting link

  • 3/4" Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain, Common Clutch for 2-7 HP Engines, Engagement Speed 2300300 RPM.
  • Perfect for Go Kart, Minibike and Fun Kart.
  • Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4 shaft.
  • Also fits any other engines with 3/4 crank shaft and 3/16 key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Package included: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.
Check Stock

Fe Myers HJ75D Jet, Deep Well Pump, 3/4 HP, Cast Iron

  • Powered by industry standard 2- or 3-wire motors.
  • Thermoplastic discharge and motor bracket.
  • Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP).
Check Stock

BaQiRo Stainless Steel 20hp Outboard Motor Bracket Kicker for Marine Boat

  • With the sturdy design and smooth, spring‑assisted action, it is quick and easy to lift auxiliary or kicker motor..
  • Mounting Size 8” × 8-5/8”, Broad Size: 8-1/4” × 10-3/8”..
  • Full adjustable, 4‑position mounting plate accommodates a wide variety of motor and transom configurations..
  • Fits most style of 2-stroke outboard motors.
Check Stock

Boat Outboard Motor Bracket, Marinebaby Aluminum outboard Engine Support

  • Suitable for 2-stroke Motors 7-1/2 HP to 20 HP.
  • Stainless Steel Springs Counter-balance Motor Weight.
  • Broad Size: 8-1/4" * 10-3/8" (210mm*264mm).
  • Mounting Size 5-1/4” * 9” (133.35mm*228.6mm).
Check Stock

M-Y Wedge Motor Support FITS 3-Ram Trim/Tilt Systems

  • Suitable for 2-stroke Motors 7-1/2 HP to 20 HP.
  • Broad Size: 8-1/4" * 10-3/8" (210mm*264mm).
  • Designed for use with power or sail boats.
  • Mounting Size 5-1/4” * 9” (133.35mm*228.6mm).
Check Stock

RITE-HITE Stainless Steel Propeller Wrench - Tightens 1 1/16

  • STAINLESS STEEL PROP WRENCH BY RITE-HITE.
  • Designed for OMC motors over 40HP and Mercury motors over 50HP.
  • Compact Size For Just The Right Leverage, Raise Star Washer up on Prop Hub.
Check Stock

BURCAM 101128HZ Submersible Deep Well Pump 1/2 HP 10 GPM 3-Wire + Ground 230Volts

  • Powered by industry standard 2- or 3-wire motors.
  • Thermoplastic discharge and motor bracket.
  • Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP).
Check Stock

Furnace Draft Inducer/Exhaust Venter Motor Fits Jakel 1172823

  • Multi-speed, constant torque, brushless DC motor.
  • NEMA 48-frame (5. 6 inch diameter) belly band mount with 5-inch long 1/2 inch diameter shaft.
  • Four discrete speeds using 24VAC, plus automatic continuous fan speed.
  • Designed to replace direct-drive blower motors in residential and light commercial indoor furnaces, air handlers and package systems that were designed with a 6-pole 1075rpm rated PSC motor.
  • Replaces / Supersedes: American Standard & Trane MOT13004 , MOT-13004 , MOT12888 , MOT-12888 , MOT12292 , MOT12319 , MOT12542 , Carrier / ICP HD44AE137 , HD44AE137A , HD44AE138 , 1172987 , 1173682 , 5SME39HKL017 , 5SME39HXL285 , 5SME39HXL298 , S81-948 and other 1/2 HP X13 Constant Torque Motors from ALL Major Manufacturers as well as the Azure Digi-Motor # 10800..
  • DOES NOT REPLACE EON , 3. 0 , 2. 3 and 2. 5 ECM Motors.
  • 1/2 Horsepower , 208-230 VOLT , Universal X13 Replacement Motor.
Check Stock

Youxmoto Go Kart Clutch 3/4″ Bore 12T with #35 Chain, 12 Tooth Centrifugal Clutch and Chain for Go Kart Mini bike Honda cloned Engines GC160, GC190, GX120, GX140, GX160, GX200-2-6.5hp, 3/4″ Shaft

  • 【BROAD COMPATIBILITY】: This 3/4 clutch 35 chain Perfect for Go Kart, Mini bike, Fun Kart, and any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands..
  • 【FITMENT】: Fits for 2-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs & Stratton 2 – 6.5 HP with 3/4″ Shaft 212 212cc Predator Engine Clutch, and Common clutch for 3.5-7hp engines using #35 Chain..
  • 【WORK WITH】: 3/4″ Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain for 2-7 HP Engines, Engagement Speed 2300±300 RPM..
  • 【PACKAGE INCLUDED】: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link..
  • 【LIFETIME WARRANTY】: Go Cart centrifugal clutch and chain from Youxmoto comes complete with a lifetime warranty. If you are not satisfied with our products, 100% refund or resend..
Check Stock

Caltric compatible with Primary Clutch Sliding Fixed Sheave Kit Yamaha Rhino 700 YXR700F 2008-2013

  • Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 RPM. The 12T clutch has a broached 3/16" keyway with two set screw holes located 90 degrees apart.
  • Our go-kart clutch is made of high-grade steel, heavy-duty and long lasting. It can withstand the strain and heat caused by friction, once the clutch engages.
  • Perfect for Go Kart, Minibike and Fun Kart. Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
  • Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Go cart clutch kit includes two set screws, but chain is not included. The two set screw holes are tapped 1/4"-28.
Check Stock

Centrifugal Clutch Go Kart Clutch 3/4 Bore 10 Tooth for #40/41/420 Chain Fits for Mini Bike Go Kart predator 212 Lawnmower and Honda GC GX 2-6.5HP Engine

  • ★ Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain, Fit for go kart, Mini Bike, Lawnmower and fun kart, 3/4" Bore Designed for predator 212....
  • ★ Centrifugal Clutch Fits 2-6.5HP Small Engines HONDA GX120, GX140, GX160, GX200, GC160, GC190.
  • ★ Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 2-6.5HP motors in all brands.
  • ★ Tooth: 10 Tooth sprocket for #40/41/420 chain (Chain included).
  • ★ Clutch Easy installation, a perfect replacement part for your mini bike and go kart. Package included: 1 x Centrifugal Clutch.
Check Stock

Centrifugal Clutch, Go Kart Clutch 3/4 Bore 12T with #35 Chain for Go Kart Minibike Honda Engines GX160 GX200 GX140 GX120 GC160 GC190, With 2pcs Set Screws and 1pc Connecting link

  • ★ Centrifugal Clutch, Go Kart Clutch 3/4 Bore 12T with #35 Chain for 2-7 HP Engines, Engagement Speed 2300±300 RPM.
  • ★ Perfect for Go Kart, Minibike and Fun Kart.
  • ★ Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
  • ★ Fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • ★ Package included: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.
Check Stock