Categories

Best 1 4 Hp Motors

M-Y Wedge Motor Support FITS 3-Ram Trim/Tilt Systems

  • Suitable for 2-stroke Motors 7-1/2 HP to 20 HP.
  • Broad Size: 8-1/4" * 10-3/8" (210mm*264mm).
  • Designed for use with power or sail boats.
  • Mounting Size 5-1/4” * 9” (133.35mm*228.6mm).
Check Stock

LotFancy Go Kart Clutch 3/4 Bore 12T with #35 Chain, Centrifugal Clutch Fit for Go Kart Minibike Honda Engines, With 2pcs Set Screws & 1pc Connecting link

  • 3/4" Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain, Common Clutch for 2-7 HP Engines, Engagement Speed 2300300 RPM.
  • Perfect for Go Kart, Minibike and Fun Kart.
  • Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4 shaft.
  • Also fits any other engines with 3/4 crank shaft and 3/16 key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Package included: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.
Check Stock

Centrifugal Clutch 3/4 Bore 12 Tooth 35 Chain for Go Kart Mini Bike Lawnmower Fun Kart 2-7 HP Engine Fits Honda GX160 GX200 GX140 GX120 GC160 GC19

  • 【Compatibility For】Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Tecumseh....
  • 【Also Fits For】Also compatible with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • 【Replace Numbers】PBH540687. Centrifugal clutch 3/4" bore 12 tooth #35 chain screw sets for go kart mini bike fun kart 2-7 HP engines 2300±300 PRM.
  • 【Recommended Engine】2HP - 7HP, 3/4" shaft with flat key.
  • 【Package included】1*Centrifugal Clutch, 1* #35 Chain, 2*Set Screws and 1*Connecting Link.
Check Stock

PANTHER MARINE O/B Motor Bracket SS 15HP MAX

  • Works with 4-stroke motors up to 15 HP or 2-stroke motors up to 20 HP with a maximum weight of 132 lbs..
  • Twist-knob safety locks provide increased torque rating while helping secure the bracket in place.
  • Built extra tough and extra wide for heavier 4-stroke engines.
  • Heavy-duty stainless steel torsion springs for easy lifting.
  • 4-position lock bar and 11" of travel allows for a better range of trim adjustments.
Check Stock

Five Oceans FO4205 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 130lbs 60kg, Black Poly Mounting Board 25HP

  • Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches black poly mounting board for the new wider style motor locking clamps Transom Plate Measures: 4-3/8 inches x 4-7/8 inches.
  • They are designed for 4-stroke motors. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
  • Suitable for motors up to 25HP with a maximum weight of 130 pounds. Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
  • Built especially for new 4 strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary motors with ease.
Check Stock

Youxmoto Go Kart Clutch 3/4″ Bore 12T with #35 Chain, 12 Tooth Centrifugal Clutch and Chain for Go Kart Mini bike Honda cloned Engines GC160, GC190, GX120, GX140, GX160, GX200-2-6.5hp, 3/4″ Shaft

  • 【BROAD COMPATIBILITY】: This 3/4 clutch 35 chain Perfect for Go Kart, Mini bike, Fun Kart, and any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands..
  • 【FITMENT】: Fits for 2-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs & Stratton 2 – 6.5 HP with 3/4″ Shaft 212 212cc Predator Engine Clutch, and Common clutch for 3.5-7hp engines using #35 Chain..
  • 【WORK WITH】: 3/4″ Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain for 2-7 HP Engines, Engagement Speed 2300±300 RPM..
  • 【PACKAGE INCLUDED】: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link..
  • 【LIFETIME WARRANTY】: Go Cart centrifugal clutch and chain from Youxmoto comes complete with a lifetime warranty. If you are not satisfied with our products, 100% refund or resend..
Check Stock

Centrifugal Clutch, Go Kart Clutch 3/4 Bore 12T with #35 Chain for Go Kart Minibike Honda Engines GX160 GX200 GX140 GX120 GC160 GC190, With 2pcs Set Screws and 1pc Connecting link

  • ★ Centrifugal Clutch, Go Kart Clutch 3/4 Bore 12T with #35 Chain for 2-7 HP Engines, Engagement Speed 2300±300 RPM.
  • ★ Perfect for Go Kart, Minibike and Fun Kart.
  • ★ Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
  • ★ Fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • ★ Package included: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.
Check Stock

Caltric compatible with Primary Clutch Sliding Fixed Sheave Kit Yamaha Rhino 700 YXR700F 2008-2013

  • Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 RPM. The 12T clutch has a broached 3/16" keyway with two set screw holes located 90 degrees apart.
  • Our go-kart clutch is made of high-grade steel, heavy-duty and long lasting. It can withstand the strain and heat caused by friction, once the clutch engages.
  • Perfect for Go Kart, Minibike and Fun Kart. Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
  • Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Go cart clutch kit includes two set screws, but chain is not included. The two set screw holes are tapped 1/4"-28.
Check Stock

BYS VRO Oil Injection Conversion Fuel Pump Kit for Johnson/Evinrude 5007420 5007422

  • ▶ This VRO system conversion non-oiling fuel pump for 90hp-250hp Johnson & Evinrude Outboard motors. Fits V6 Crossflow and Looper engines but DOES NOT fit 60 degrees applications..
  • ▶ Replace Part Number：for Johnson/Evinrude 5007420,5007422.
  • OMC part # 4-7359； EMP part # 1399-07359. Interchange Part Number: for Volvo 5007420.
  • ▶ Compatibility: 5007420 VRO system conversion non-oiling fuel pump for 90hp-250hp Johnson & Evinrude Outboard motors..
  • ▶ 5007420 VRO Oil Injection Conversion Fuel Pump is specially designed to exact OEM standards manufactured and tested,to help deliver optimum performance in Johnson/Evinrude engines,provides a good engine performance,which gives your machine the new power and torque it really deserves..
  • ▶ Package Includes: 1x VRO Oil Injection Conversion Fuel Pump Kit..
Check Stock

RITE-HITE Stainless Steel Propeller Wrench - Tightens 1 1/16

  • STAINLESS STEEL PROP WRENCH BY RITE-HITE.
  • Designed for OMC motors over 40HP and Mercury motors over 50HP.
  • Compact Size For Just The Right Leverage, Raise Star Washer up on Prop Hub.
Check Stock

Annurssy Brackets & Hinge Assembly for Boat Engine Outboard Electric Trolling Motor

  • Approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern).
  • Works with 0-20hp motors with electric trim and tilt.
  • The Mini Electric On The Fly Jack Plate is easy to install.
  • Our jack plates can be raised and lowered by a up/down push button while on the water within seconds from top to bottom..
  • 3 year warranty on the jack plate housing - 1 year warranty on the electric actuator.
Check Stock

Centrifugal Clutch Go Kart Clutch 3/4 Bore 10 Tooth for #40/41/420 Chain Fits for Mini Bike Go Kart predator 212 Lawnmower and Honda GC GX 2-6.5HP Engine

  • ★ Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain, Fit for go kart, Mini Bike, Lawnmower and fun kart, 3/4" Bore Designed for predator 212....
  • ★ Centrifugal Clutch Fits 2-6.5HP Small Engines HONDA GX120, GX140, GX160, GX200, GC160, GC190.
  • ★ Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 2-6.5HP motors in all brands.
  • ★ Tooth: 10 Tooth sprocket for #40/41/420 chain (Chain included).
  • ★ Clutch Easy installation, a perfect replacement part for your mini bike and go kart. Package included: 1 x Centrifugal Clutch.
Check Stock

Go Kart Clutch 3/4 Bore 12T with #35 Chain, Centrifugal Clutch for Minibike and Fun Kart, Compatible with Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight, Briggs and Stratton Tecumseh

  • 【Suit for】: 3/4″ Bore 12 Tooth Centrifugal Clutch with 4 Ft #35 Chain, Common Clutch for 2-7 HP Engines, Engagement Speed 2300±300 RPM..
  • 【Compatible with】: This Clutch kit is compatible with 22-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200. Also fit for Tecumseh and Briggs Stratton engines 2-6.5HP with 3/4″shaft. Common clutch for 3.5-7hp engines using #35 Chain..
  • 【Tips】: Also fits for most 5.5/6.5 HP clones, 4-7 motors in all brands and any other engines with 3/4 crank shaft and 3/16” key way..
  • 【Package including】:1 x Centrifugal Clutch, 1 x 4 Ft #35 Chain, 2 x Set Screws and 1 x Connecting Link..
  • 【100% Satisfaction After-Sales Service】:High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to ensure you are 100% satisfied!.
Check Stock