Categories

Best 1 4 Inch J bolts

Titan Fitness T-2 Series Power Rack 83-inches High J-Hooks Single Pull-Up Bar

  • T-2 Series 2 x 2-inch 12-Gauge Steel Uprights.
  • 1-inch holes spaced 2-inches on the center.
  • Included: (4) heavy-duty steel uprights, (2) Pin and Pipe Safeties, (2) Weight Plate Horns, (2) J-Hooks with UHMW plastic, 1.25-inch Single Pull-Up....
Check Stock

Stanley Proto J6018RK 3/4 Drive Ratchet Head Repair Kit - Torque Wrench

  • 1/4-inch to 1-inch ratchet wheels made from alloy steel for uncompromising strength and durability.
  • Field repair your torque wrench ratchet head easily with the corresponding repair kit.
  • Use with:J6018AB, J6018CX, J6018CXCERT, J6020AB, J6020CX, J6020CXCERT, J6020NM.
Check Stock

US Motors AST125 Nidec Replacement Swimming Pool Pump Motor

  • Replacement 1.25 Total Horsepower (THP) swimming pool pump motor.
  • Standard 56J-Frame, C-Flange motor with threaded shaft.
  • Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
  • Designed to replace a 1-HP Up-Rated or 3/4-HP Full-Rated motor and compatible with 115/230 volts.
  • Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.
Check Stock

LotFancy Adjustable Battery Hold Down, Universal Battery Bracket with J Hook, Battery Tie Down Kit, 9.1inch (23cm) Bolt Length

  • Adjustable: Bolt length: 9.1inch (23cm). 3.74inch long thread for height adjustment. Adjustable cross-bar expands from 5.7" to 8.5" wide. Thread size: 1/4"-20 UNC. Please confirm your battery size before purchasing.
  • High Quality: This car battery hold down is made of premium iron, sturdy and available for long service life. The surface is anodized for enhancing its corrosion and rust resistance.
  • J Hook: Compared with other’s L hook, our J hook can hold down battery more securely. It won’t slide out of the tray easily.
  • Easy to Install: Adjust the width and height according to the size of the battery, hook the J hook into the hole on the tray, tighten the wing nut screws to ensure a firm grip on the battery. The battery holder provides steady holding for the battery.
  • For Most Battery Size: This adjustable battery holder can be used for group 21，21R，22F, 22R, 24, 25, 26, 26R, 27, 31, 33, 34, 34R, 35, 36R, 41, 42, 43, 46, 47, 48, 49, 65, 78, 94R Batteries and most group size batteries.
Check Stock

ALEKO Small J-Bolt Hinge for Doors and Driveway Gates - 1/2 Inch - LM113

  • Our j-bolt hinge is the perfect complement to your door or swinging gate.
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
  • Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
  • For a more in-depth breakdown of dimensions see product images.
Check Stock

Stanley Proto J6006RK 3/8' Drive Ratchet Head Repair Kit - Torque Wrench

  • 1/4-inch to 1-inch ratchet wheels made from alloy steel for uncompromising strength and durability.
  • Field repair your torque wrench ratchet head easily with the corresponding repair kit.
  • Use with: J6006C, J6006CX, J6006CXCERT, J6006MC, J6006NMC, J6012C, J6066C, J6066CX, J6066CXCERT, Made in USA.
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Stanley Proto J6014RK 1/2' Drive Ratchet Head Repair Kit - Torque Wrench

  • 1/4-inch to 1-inch ratchet wheels made from alloy steel for uncompromising strength and durability.
  • Field repair your torque wrench ratchet head easily with the corresponding repair kit.
  • Use with: J6014C, J6014CX, J6014CXCERT, J6014MC, 6014NMC, J6016C, J6016CX, J6016CXCERT, J6016MC, J6016NMC, J6068C, J6072C, J6072CX, J6072CXCERT.
Check Stock

Titan Fitness T-2 Series Power Rack 71-inches High J-Hooks Single Pull-Up Bar Safeties Weight Plate Horns

  • T-2 Series 2 x 2-inch 12-Gauge Steel Uprights.
  • 1-inch holes spaced 2-inches on the center.
  • Included: (4) heavy-duty steel uprights, (2) Pin and Pipe Safeties, (2) Weight Plate Horns, (2) J-Hooks with UHMW plastic, 1.25-inch Single Pull-Up....
  • NOTE: The T-2 Series Power Rack comes equipped with pre-set holes to fit the Lat Tower Rack Attachment.
Check Stock

Ajustable Battery Hold Down with Stainless J bolt Kit,A Specialty Automotive Tools Car Battery Holder of Car SUV Truck RV Camper and Trailer (11inch/27cm bolts)

  • ...work less difficult. Holds the battery securely, eliminating the safety hazards and dangers of a poorly secured battery while driving..
  • 【Buyer's guide】: Before choosing our heavy duty battery holder, measure your battery in the following fitment ranges. Width 5.7-8inch,Length 1:4.9-10inch/Length 2:3.74-8inch/Length 3:6.5-11inch.Please choose the right holder according to your car battery size before purchasing..
  • 【Save on maintenance costs】:These battery mounts with bolts and J-bar are very easy to install and use easily, even if you're not a professional mechanic and like to fix your own car, this is definitely a smart choice! Instead of going to the garage,do-it-yourself repairs save you from expensive repairs..
  • 【100% satisfaction experience】: If you have any questions about the product, please send an email to our customer service, we offer a perfect service 24 hours a day. If the item is defective in any way, we are willing to send you a new one or give you a full refund to provide you with the most satisfactory product and service, thank you for your support!.
Check Stock

ARONOVA Adjustable Battery Hold Down,Universal Crossbar with 8''length,18-8 (304) Stainless Steel J bolt sets

  • Premium iron crossbar & Stainless steel j bolt sets,anti-rust, sturdy and available for long service life..
  • Adjustable crossbar, from 5.35" to 7.85" wide,available in 8/10/11/12 inch j bolts..
  • Exclusive finishment,thermoset baked-on Premium powder coat finish for a bright and durable surface..
  • Simple design,easy installation, directly replace your broken one, convenient to use.A perfect modification accessory for racing, sports car, RV,boats,etc..
  • Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..
Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock