Categories

Best 1 bromo 3 chloro 5

Smith and Nephew Remove Adhesive Remover Wipes 403100, 50-count

  • Simple to use, gently and painlessly clean all types of adhesive residue from the skin.
  • Aloe moisturizes and conditions the skin without greasiness.
  • Non-irritating and non-sensitizing, even for ostomates and geriatric patients.
  • Environmentally friendly and does not contain ozone-depleting chloro-fluorocarbons.
Check Stock

Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set

  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch.
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch.
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch.
Check Stock

Legines Brass Hose Barb Fittings Assortment Kits Splicer + Male Coupler + 90 degree Male Elbow 65 Pcs

  • Splicer : 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5).
  • 90 Degree Male Elbow: 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT(4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNP(2) 1/2" barb to 3/8" MNPT(2).
  • Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2).
Check Stock

SWANLAKE Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch 16pcs

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

SEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
  • 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
Check Stock

HORUSDY 16-Piece Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts....
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x....
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

AVENGERS INFINITY WAR MARVEL CHARACTERS LOGOS SET OF 10 SPECIAL OCCASION COOKIE CUTTERS BAKING TOOL MADE IN USA PR1089

  • COOKIE CUTTERS FOR BAKING, PLAY AND MORE - Use for traditional sugar cookies, fun shaped sandwiches, children’s supervised play, art projects, and so much more.
  • SIZE - Hulk: 3 1/4" x 4" X 5/8" Iron Man: 4" X 2.5" X 5/8" Thor Hammer: 3 7/8" X 3 7/8" X 5/8" Captain America: 3 1/2" X 3 1/2" X 5/8" Avengers Logo: 3 1/2" x 4 1/8" x 5/8" Black Panther: 2 3/4" x 3 3/4" x 5/8" Spiderman: 3 1/4" x 4" x 5/8" Dr. Strange: 3 1/2" x 2 1/2" x 5/8" Starlord: 3" x 4 1/4" x 5/8" Black Widow: 3 1/2" x 3 1/2" x 5/8".
  • MADE WITH A FOOD-SAFE PLASTIC - Manufactured with pride in the USA.
  • USE INSTRUCTIONS - Coat both towel-dried cookie cutter and dough surface completely in flour before use. Apply even pressure across entire cutter when pressing into dough. Re-coat in flour before each use.
  • CARE INSTRUCTIONS - Hand wash only in warm, soapy water. Not dishwasher or oven safe.
Check Stock

MABUARN ER Spring Collet ER11 ER16 ER20 ER25 Set with Plastic Case for CNC Lathe Engraving and Milling Tool Workholding Chuck ER16 AA 13PCS

  • Material: The ER spring collet set is made of high quality 65Mn spring steel with high wear resistance and durable characteristic..
  • High performance: The run-out tolerance of AA type is less than 0.0003"..
  • Application: It's suitable for CNC, engraving machines and other equipment. Used in milling, boring, drilling, wire tapping and other operations,.
  • Gripping range: --ER11 10PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32").
  • --ER16 13PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 13/32").
  • --ER20 15PCS (1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32". 5/16", 3/8", 13/32", 7/16", 15/32", 1/2").
  • --ER25 20PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 3/4")..
  • Package: ER11: 10pcs of collets with a strong plastic case.
  • ER16: 13pcs of collets with a strong plastic case.
  • ER20: 15pcs of collets with a strong plastic case.
  • ER25: 20pcs of collets with a strong plastic case..
Check Stock

Swordfish 31190-120pc Roll Pin Spring Slotted Spring Pin Assortment

  • 10 diameters: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8.
  • 11 lengths: 3/16, 1/4, 5/16, 1/2, 5/8, 3/4, 1, 1-1/4, 1-1/2, 1-3/4, 2.
  • Organized in a PP storage case with chart inside lid for easy identifying.
Check Stock

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

  • 【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
  • 【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
  • 【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
  • 【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
  • 【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..
Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

  • 【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
  • 【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
  • 【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
  • 【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
  • 【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....
Check Stock

Royal Purple 20-253 Extended Life Premium Oil Filter

  • Filter cross references: Chrysler 5281090, FRAM (HP3, PH16, PH43, TG16, TG43, XG16, XG43), Mobil1 M1-205A, K&N HP2004.
  • 1972 – 1994 Alfa Romeo 2. 0L, 2. 5L, 3. 0L.
  • 1968-2008 Chrysler & Dodge 2. 0L, 2. 2L, 2. 4L, 2. 5L, 2. 7L, 3. 0L, 3. 2L, 3. 3L, 3. 5L, 3. 8L, 3. 9L, 4. 0L, 4. 7L, 5. 2L, 5. 7L, 5. 9L, 6. 1L, 7. 2L, 8. 0L, 8. 3L.
  • 1974-1985 Ford & Mercury 1. 6L, 2. 3L, 2. 5L, 2. 8L, 5. 0L, 5. 8L.
  • 1991-2007 Jeep 2. 5L, 4. 0L, 4. 7L, 5. 2L, 5. 9L, 6. 1L.
  • 1980-1983 Nissan 2. 0L, 2. 2L, 2. 4L, 2. 8L.
  • 1961-1980 Triumph 1. 1L, 1. 3L, 1. 5L 3. 5L.
  • 1971-1983 Volkswagen 1. 7L, 1. 8L, 2. 0L.
  • 15, 000-mile protection when used with full synthetic oil.
  • Premium oil filter using all-synthetic micro-glass media to achieve 99% filtration efficiency at 25 microns or larger.
  • Durable, silicone-constructed, anti-drain back valve to prevent dry starts.
Check Stock

Segomo Tools 110 Piece Hardened Alloy Steel SAE Tap And Die Threading Tool Set With Storage Case | SAE Tap and Die Set | Rethreading Kit | Tap Set | Tap and Die Kit - TD110SAE

  • ...orage ] Our tap and die sets are constructed from hardened alloy steel for maximum strength and durability. They also come in heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization..
  • [ Handy Accessories] This large tap and die set comes also with two tap wrenches (x2): M3-M12, M6-M20, two die wrenches : 25mm, 38mm O/D adn one T-Type tap wrench: M3-M6..
  • SAE Tap Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNC, 12-24 UNC, 1/4-20 UNC, 1/4-28 UNF, 1/4-24 UNS, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/8-27NPT, 1/4-18NPT..
  • SAE Die Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNF, 12-24 UNC, 1/4-20 UNC, 1/4-24 UNS, 1/4-28 UNF, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1.0, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/4-18NPT, 1/8-27NPT.
Check Stock