Farnam Purishield Horse Wound Care Fast Acting Spray, Cleans and Treats Wounds on Horses, Dogs, Cats & Livestock, 12 Ounces
- Soothing, Slow Drying Anti-septic Dressing For Minor Surface Lesions, Surface Wounds, Cuts, Burns and Superficial Dermatitis.
- Product Contains Scarlet Oil and P Chloro-m-xylenol, Which Is A Powerful Germicide.
- Helps Relieve Itching and Aids In Rapid Healing.
Check StockDBM IMPORTS Machinist s Thin Parallel Bar Set - 8 Pair 1/2 x 6
- Precision ground and hardened Parallel and accurate within +/- .0002".
- Made from high quality tool steel- stress relieved against distortion.
- 1/8" Incrementation of height from 7/8" to 1-3/4".
- Storage Case Dim L x W x H (in): 7-1/2 x 9-3/4 x 3 *Estimated*.
Check StockTEKTON 1/4 Inch Drive 6-Point Socket and Ratchet Set, 55-Piece (5/32-9/16 in., 4-14 mm) | SKT05301
- Includes 11-pc. 1/4 in. drive 6-pt. inch sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
- 11-pc. 1/4 in. drive deep 6-pt. inch sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
- 13-pc. 1/4 in. drive 6-pt. metric sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
- 13-pc. 1/4 in. drive deep 6-pt. metric sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
- 1-pc. 1/4 in. drive 90-tooth quick-release ratchet: 6 in..
- 1-pc. 1/4 in. drive spinner handle: 6 in..
- 2-pc. 1/4 in. drive extension bars: 3, 6 in..
- 1-pc. 1/4 in. drive hex bit holder: 1/4 in..
- Complete set has every size from 5/32 to 9/16 inch and 4 to 14 mm in both deep and standard lengths.
- 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
- Extra large die-stamped size marking is easy to read and can’t wear off.
- Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
Check StockAstro Pneumatic Tool 1600 16-Piece Punch and Chisel Set
- Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch.
- Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch.
- Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch.
- Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch.
Check StockRESISTOL Mens Ridesafe Straw Cowboy Hat L Natural
- Sizing Chart XX Small fits 6 3/8 6 1/2 20 1/4 20 5/8.
Check StockHammered Traditional Design Copper Thali Set,Multicuisine Dinnerware Pieces 9 Pieces Set
- Service for 6 includes 6 - 10.75" dinner plates 6 - 8.25" dessert plates 6 - 8" soup bowls 6 - 6.5" fruit bowls 6 - 12 oz mugs.
- Serveware includes 1 - 13" oval platter 1 - 10.75" serve bowl 1 - sugar jar w.lid 1 - creamer 1 - salt & pepper set 2 - 8" serve bowls.
Check Stock10 Strawberry Street Nova Black Round 62-Piece Dinnerware Set, Service for 6
- Complete service for 6, including drinkware, flatware, and 2 serving bowls..
- Microwave, Oven, and Dishwasher safe Stoneware.
- 6 x Dinner Plates: 10. 5" W x 1" H, 6 x Salad Plates: 7. 5" W x 0. 75" H, 6 x Appetizer Plates: 6" W x 0. 75" H.
- 6 x Cereal Bowls: 7" W x 2. 25" H, 6 x Dessert Bowls: 5" W x 1. 5" H.Included components: 6 x Dinner Plates: 10.5" W x 1" H6 x Salad Plates: 7.5" W x 0.75" H6 x Appetizer Plates: 6" W x 0.75" H6 x Cereal Bowls: 7" W x 2.25" H6 x Dessert Bowls: 5" W x 1.5" H2 x Serving Bowls: 9" W x 2.5" H6 x 10 Oz Glass Tumblers: 3" W x 5"H6 x Forks: 7" L x 1" W6 x Knifes: 8" L x .75" W6 x Dinner Spoons: 7" L x 1.5" W6 x Tea Spoons: 5.25" L x 1.25" W.
Check StockGibson Home Zen Buffet Dinnerware Set Service for 6 39pcs White Square
- Service for 6 includes 6 - 10.75" dinner plates 6 - 8.25" dessert plates 6 - 8" soup bowls 6 - 6.5" fruit bowls 6 - 12 oz mugs.
- Serveware includes 1 - 13" oval platter 1 - 10.75" serve bowl 1 - sugar jar w.lid 1 - creamer 1 - salt & pepper set 2 - 8" serve bowls.
Check StockSWANLAKE Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch 16pcs
- Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
- Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
- 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
- 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
- Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check StockTEKTON 1/4 Inch and 3/8 Inch Drive 6-Point Socket & Ratchet Set, 45-Piece (3/16-3/4 in., 5-19 mm) | SKT95301
- Includes 9-pc. 1/4 in. drive 6-pt. inch sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 in..
- 10-pc. 1/4 in. drive 6-pt. metric sockets: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm.
- 1-pc. 1/4 in. drive spinner handle: 6 in..
- 1-pc. 1/4 in. drive hex bit holder: 1/4 in..
- 1-pc. 1/4 in. hex x 3/8 in. drive power socket adapter.
- 7-pc. 3/8 in. drive 6-pt. inch sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
- 10-pc. 3/8 in. drive 6-pt. metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
- 1-pc. 3/8 in. drive spark plug socket: 5/8 in..
- 1-pc. 3/8 in. drive 90-tooth quick-release ratchet: 8 in..
- 1-pc. 3/8 in. drive extension bar: 6 in..
- 1-pc. reducer: 3/8 in. drive (F) x 1/4 in. drive (M).
- Complete set has every size from 3/16 to 3/4 inch and 5 to 19 mm.
- 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
- Extra large die-stamped size marking is easy to read and can’t wear off.
- Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
- Finely geared 90-tooth ratchet needs only a 4-degree working swing arc.
- Includes tools not found in most sets like a universal joint, power socket adapter, screwdriver bit adapter, and extensio....
Check StockSEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch
- Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
- Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
- 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
- 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
- 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
Check StockTEKTON 3/8 Inch Drive 6-Point Socket and Ratchet Set 73-Piece 1/4-1 in 6-24 mm SKT15311
- Includes 15-pc. 3/8 in. drive 6-point sockets: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
- 15-pc. 3/8 in. drive deep 6-point sockets: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
- 19-pc. 3/8 in. drive 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
- 19-pc. 3/8 in. drive deep 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
- 2-pc. 3/8 in. drive extensions: 3, 6 in..
- 1-pc. 3/8 in. drive quick-release ratchet: 8 in..
- 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
- Extra large die-stamped size marking is easy to read and can’t wear off.
- Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
- Finely geared 90-tooth ratchet needs only a 4-degree working swing arc.
Check StockGEARWRENCH 110 Pc. 1/4', 3/8' & 1/2' Drive 6 & 12 Pt. Mechanics Tool Set, Standard & Deep, SAE/Metric - 89058
- 84 tooth ratchet mechanism offers a 4. 3° swing arc for easy access.
- Contains 12 point full polish long pattern combination wrenches and sockets.
- Sockets feature off-corner loading design to reduce fastener rounding.
- Bright, full polish chrome finish easily wipes clean and resists corrosion.
- Includes blow mold case for storage and organization.
- Included Components: "3 Ratchets 3 Extensions 10 1/4" Drive 6 Point Standard Sae Sockets 11 1/4" Drive 6 Point Standard Metric Sockets 7 1/4" Drive 6 Point Deep Sae Sockets 7 1/4" Drive 6 Point Deep Metric Sockets 7 3/8" Drive 6 Point Standard Sae Sockets 10 3/8" Drive 6 Point Standard Metric Sockets 7 3/8" Drive 6 Point Deep Sae Sockets 10 3/8" Drive 6 Point Deep Metric Sockets 7 3/8" Drive 12 Point Standard Sae Sockets 7 3/8" Drive 12 Point Standard Metric Sockets 6 1/2" Drive 12 Point Standard Sae Sockets 6 1/2" Drive 12 Point Standard Metric Sockets Spark Plug Socket 4 Sae Long Pattern Combination Wrenches 4 Metric Long Pattern Combination Wrenches".
Check Stock