Mikrotik RB951G-2HND 5-Port Gigabit Wireless AP 1000mW
- No switch-chip - the device features only fully independent Ethernet ports each with a direct connection to the CPU.
- Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you.
- 100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
- More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
- This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent.
Check StockHP Procurve 2510-24 Managed Ethernet Switch (J9019B#ABA)
- HP ProCurve 2510-24 Managed Ethernet Switch - 2 x SFP (mini-GBIC) - 24 x 10/100Base-TX, 2 x 10/100/1000Base-T.
- HP ProCurve 2510-24 Managed Ethernet Switch.
- 2 x SFP (mini-GBIC) - 24 x 10/100Base-TX, 2 x 10/100/1000Base-T.
Check StockJeirdus for Cisco GLC-LH-SMD GLC-LH-SM SFP-GE-L, Gigabit SFP Transceiver Module, 1000Base-LX/LH, SMF, 10km 1310nm Duplex LC Connector
- Compatible for Cisco GLC-LH-SMD GLC-LH-SM SFP-GE-L.
- 1000Base-LX/LH, SFP transceiver module for SMF, 1310-nm wavelength, dual LC/PC connector.
- 1G SFP Transceiver, SFP LX/LH, 1000Base-LX/LH SFP, 10km.
- Compatible with Cisco.Jeirdus owns Compatibility LAB to meet the coding requirements for various brands of switches and routers.Each transceiver is individually tested before delivery..
- 100% new materials,high Quality with CE, FCC,3 year replacement and lifetime warranty.
Check StockGigabit Ethernet Multi-Mode LC Fiber Media Converter (SFP SX Transceiver Included), up to 550M, 10/100/1000Base-Tx to 1000Base-SX
- Seamless Conversion of Copper to Fiber – This media converter kit includes a multimode 1000BASE-SX SFP module(850nm), which enables you to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa.
- Extend Transmission Distance – By using this ethernet fiber media converter, you can extend link distance up to 550 metres/ 1804 ft via OM3/OM4 multimode fiber (MMF).
- Plug and Play – Hot-swappable design makes this fiber converter easy to install and troubleshoot for newbies.
- 1.25G Gigabit Connection – 10/100/1000Mbps Auto-Negotiation RJ45 Port Supporting Auto-MDI/MDIX and Half-Duplex / Full-Duplex Transfer Mode.
- What You Get – 1* Gigabit Ethernet SFP to RJ45 media converter.
- 3-year Warranty, Free Lifelong Technology Support.
Check StockAdd On 1GBS 1 RJ-45 to 2 Sfp Port
- Add On transceiver/media converter - Network (RJ-45) - 1x PoE+ (RJ-45) ports - multi-mode, single-mode - Gigabit Ethernet - 1000Base-X, 10/100/1000Base-T - 2 x expansion slots - SFP - 2 x SFP slots.
Check StockHP Procurve 2910al-24G-PoE Ethernet Switch (J9146A#ABA)
- HP ProCurve 2910al-24G-PoE Ethernet Switch - 4 x SFP (mini-GBIC) - 24 x 10/100/1000Base-T.
- HP ProCurve 2910al-24G-PoE Ethernet Switch.
- 4 x SFP (mini-GBIC) - 24 x 10/100/1000Base-T.
Check Stock1G SFP SX for Cisco LC-SX-MMD GLC-SX-MM SFP-GE-S Ubiquiti unifi UF-MM-1G Netgear AGM731F D-Link DEM-311GT ZTE SFP-GE-M500 Extreme MGBIC-LC01 1000BASE-SX SFP 850nm 550m DOM Transceiver Module…
- 【1000BASE-SX】SFP to LC Optical Gigabit Ethernet transceiver module 1.25Gbps SFP Mini -GBIC, Multi-mode 850nm LC duplex connector DDM 550m..
- 【1GB SFP】For Cisco 1.25 Gigabit Ethernet 1000BASE-SX standards (coding as Cisco LC-SX-MMD GLC-SX-MM SFP-GE-S ).
- 【1G SFP Module】SFP Transceivers Compatible Cicso meraki with Gigabit Ethrnet , up to 550m for MMF transmission, compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions ,specified in IEEESFF-8472 MSA Compliant, IEEE 802.3ah-2004.
- 【 Easy to Use 】installation, plug and play, fully hot-pluggable. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with SFP ports..
- 【3 WARRANTY】30-Days Free-returned, 65-Days Free-replacement, 5-Years Free-maintenance,Fibermall supports regular custom service for your options..
Check StockCreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches
- Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C,Output Power: -8.2~-1dBm,Receiver Sensivity: -11.5dBm,Interface: LC.
- Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
- Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
- Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
- You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Check Stock10 Gigabit Fiber to 10G Copper UTP Ethernet Media Converter - Open SFP+ 10Gb Slot - 10G Base-T to 10G Base-R - Cat7 UTP 1m Cable in Set - 10 Gbps Gbit Fiber Optic Converter
- 10G Base-R (Open SFP+ 10G slot) to 10G Base-T UTP Copper RJ-45 port Fiber Media Converter.
- Convert & Extend Copper Distance of Your High Speed 10gbps network connect far beyond – your SFP+ fiber transceiver distance is the only limit now.
- Supports any SFP+ 10G transceiver of your choice, be it Single or Multimode, or even WDM single optical fiber type – it’s pure Open SFP+ slot.
- Important!: 10G base-T RJ-45 UTP port will autoadapt (autosense) to 1000Base-T, 2.5G Base-T, 5G Base-T and 10G Base-T connection at user side, but....
- You Get Free 1m (3.28 ft.) UTP Cat7 (10G Network Ready) UTP RJ-45 patchcord in set with every 10G Media Converter!.
Check StockNEW Sealed Cisco GLC-TE GBIC 1000BASE-T SFP Transceiver Module 30-1475-01 Copper RJ45
- RJ-45 Transceiver, 1.25Gb/s date rate Copper SFP, 1000Base-T SFP, RJ45 SFP, reach 100m distance.
Check StockStarTech.com PCI Express Gigabit Ethernet Fiber Network Card w/Open SFP - PCIe GbE SFP Network Card Adapter NIC - Fiber Optic SFP Adapter (PEX1000SFP2)
- Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice.
- PCIe GbE Fiber Network Card with Open SFP Slot.
- Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.
- No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.
- Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design.
- Compatible with most Gigabit SFP modules.
- Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX.
- Includes low-profile/half-height installation bracket.
- Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1.
Check StockTP-Link MC220L | Gigabit SFP to RJ45 Fiber Media Converter | Fiber to Ethernet Converter | Plug and Play | Durable Metal Casing | Versatile Compatibility | Auto-Negotiation | UL Certified
- 【Convert Fiber to Ethernet】Designed to convert 1000BASE-SX/LX fiber to 1000Base-T copper media or vice versa..
- 【Versatile Compatibility】Works with both single-mode and multi-mode fiber SFP modules and is fully compatible with 10/100/1000 Base-T Ethernet connections..
- 【Easy to Use】Plug and play with no software installation or configuration needed..
- 【Auto-Negotiation Gigabit Connection】Auto-negotiation RJ45 port supports Half-Duplex/Full-Duplex transfer mode and auto-MDI/MDIX..
- 【Long-Range Transmission】When used with different types of SFP modules, the Hot-Swappable FX Port extends fiber distance up to 12.4miles (20km) for Single-Mode transmission and 1,800 feet (550m) for Multi-Mode transmission..
Check StockStarTech.com Gigabit Ethernet Fiber Media Converter with Open SFP Slot - Fiber to Ethernet Converter - Gigabit Ethernet Media Converter (ET91000SFP2)
- Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis.
- Open SFP slot supports MSA-Compliant Single / Multi-Mode Gigabit SFPs at varying distances.
- Advanced features include Link-loss forwarding, remote monitor status, two frame lengths.
- Convert and extend a Gigabit Ethernet connection over fiber using the Gigabit SFP of your choice.
- Compatible with NETGEAR ProSAFE JGS524NA / Comparable to ET91000LC2.
- Fiber to Ethernet Converter w/ Open SFP Slot / Multi / Single-Mode Fiber Converter.
- 1000 Mbps Gigabit Ethernet Media Converter / Fiber Optic Converter / Ethernet Over Fiber-1000Base-SX.
- Extend/Bridge networks over to fiber another building.
Check Stock