Categories

Best 10mm Steel Cable

TooTaci Turnbuckle Wire Tensioner Strainer Kit with 100ft Stainless Steel Coated Wire Rope,1/16\ Steel Cable,Turnbuckles for Cables Wire,for Garden Wire,Picture Wire,Strings Light Hanging,Shade Sails

  • 【Turnbuckle and Cable Kit】-- Comes with 100ft/30M Stainless Steel Metal Cable Wire Rope 1/16 , 5× M5 Turnbuckle hook and eye.
  • 20× 1/16 Wire Rope Crimping Loop Sleeves ..
  • 【Stainless Steel Cable Wire Rope】-- 1/16 Vinyl Coated Wire Rope made of 304 stainless steel, This cable bare OD is 1.5mm，Coated OD is 2mm.
  • Stainless Steel Cable Wire Rope offer corrosion resistance, durability and strength rather than galvanized wire.
  • cable wire with 7x7 construction consisting of 7 groups of 7 strands braided together.
  • stainless steel cable wire provide longer service time on project..
  • 【Turnbuckles for Cables Wire 】-- Heavy Duty M5 Hook and Eye Turnbuckle Kit made of 304 stainless steel ,Aluminum Crimping Loop Sleeve made of Aluminum ,offers good corrosion resistance and rust resistance,stainless steel turn buckle/ tension hook and eye for tightening up cable & wire rope allow you to use in any weather and anywhere !.
  • 【 Easy To Use】:1/16 Stainless Steel Wire Rope requires cable cutters.
  • 1/16 Wire Rope Crimping Loop requires crimping tool to fasten and tighten wire.
  • and 1/16 wire rope thimbles prevent wire rope wears, extend the service time for project.and the turnbuckle is adjustable ,conne....
Check Stock

Bike Rear Derailleur RD-TY21B 6/7 Speed Direct Mount for Mountain Bicycle-Black

  • Reinforced linear strand housing —— Dia 4mm Length 2000mm.
  • Shift cable housing kit —— 1550mm front inner derailleur cable & 2100mm rear inner cable..
  • Stainless steel PTFE coated inner cables ——Dia 1.1mm 2PCS.
  • Cable end crimps：2pcs；Housing ferrules: 10pcs；Gear cables housing：2000mm；Isolation protection clip：1pcs；Shift Inner Cable：1* F:1550mm 1*R:2100mm.
  • Suitable for all types of mountain bike/road bike/folding bike.Perfectly compatible with Shimano and Sram groupset derailleur..
Check Stock

33 Feet 18K Gold Stainless Steel Flat Cable Chains Link Spool Bulk with 20 Lobster Clasps and 50 Jump Rings for Pendant Necklace Jewelry DIY Making

  • Stainless steel Cable chains, silver/gold color. The size of cross chains link is about 1.0mm/1.5mm/2.0mm/2.5mm/3mm width.
  • Material:Made of Genuine Stainless Steel,so it won't fade in 2 years at least.
  • Very Convenient- Matching 50 Stainless Steel jump rings and 20pcs lobster clasps,which can be used together with cable chains to make your own necklaces.
  • Easy to use and store: the flat cable chain is rolling in a reel to avoid knotting.
  • Wide applications: good for different purposes, such as jewelry making, necklace making, crafting and DIY, and the length allows you to make many items.
Check Stock

Glarks 81Pcs Stainless Steel Bicycle Cable Cutter and Bike Brake Cable Shifter Cable with End Caps, O-Rings Set for Mountain Bike, Road Bike

  • ♛【What You Get】: Our set include 6pcs brake cables and 6pcs shift cables. Also include siliver end caps x 36pcs, 5mm brake cable end caps x 10pcs, 4mm shift cable end caps x 10pcs, O-rings x 12pcs. Come with a 8 inch stainless steel wire cutter for cutting steel wire which up to 5/32”..
  • ♛【High Quality】: The bike brake/shift cables are made of durable stainless steel and high quality standard zinc-coated, strong and durable.
  • the end caps and sheath ferrules are made of alloy, not easy to break..
  • ♛【Cable Cutter】: Our wire cable cutter is made of chrome-vanadium steel, can make very precise, very clean cuts without fraying and smashing the ends, not only cut the cutaway cables and ripcords perfectly,and also great for grommet removal project..
  • ♛【Easy to Use】: Our set include 6pcs 1.7m brake cable and 6pcs 2.1m shifter cable can be used for front or rear cable, you can use the cable cutter to cut the length you need. The cable end crimp prevents to be scratched by the cable end and keep cable ends nice and tidy, the silicone O-ring keeps your bike from the grind lacquer..
Check Stock

Senmit 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8, 3/16 Stainless Steel Cable Railing Fittings, Heavy Duty Head, Come with 8 Pairs Dies and Cable Cutter

  • ...es (Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG) and a portable, heavy-duty storage case..
  • 【CAPACITY】: This industrial lug crimper has a true 10 US ton capacity, being designed for 1/8 (6 mm Die) 3/16 (10 mm Die) stainless steel cable railing and aluminum or copper wire, providing perfect crimp terminations with every use..
  • 【HEAVY DUTY DURABLE CONSTRUCTION】: The head of crimper is made of durable steel with stainless steel coating, strength and good toughness. The Oxide Crimp Head and Dies won't chip or flake. Dies are made of more hardened 40cr steel, this cable crimper is much better than classic chrome-plated models, for an enhanced performance..
  • 【WIDE APPLICATIONS】: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable crimper will do an outstanding job..
  • 【EASY TO USE】: 4 steps to perfect crimping: install the die set that matches your terminal size, rotate the release valve in order to close it, pump the handle until the resistance felt bec....
Check Stock

BAYTORY 65pcs Cable Clamps Assortment Kit, 304 Stainless Steel Thicker Rubber Cushion Wire Pipe Clamps in 7 Sizes 1/4\ 5/16\ 3/8\ 1/2\ 5/8\ 3/4\ 1\

  • High Quality: We have professional production equipment and technical personnel. Cable Clamps made from 304 Premium Stainless steel Material with quality rubber cushioned (EPDM). Salt resistant, antirust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable. The quality rubber insulation on the clamps holds up flawlessly. It is pliable which protect the tube well and keeps the clamp securely in place..
  • Size & Quantity: Cable clamp screw hold diameter: 6.5mm, suitable for 6mm (1/4'') screw bolts and nuts to thread. Cable clamp inside diameter range: 1/4"(15pcs), 5/16"(10pcs), 3/8"(10pcs), 1/2"(10pcs), 5/8"(10pcs), 3/4"(5pcs), 1"(5pcs)(6mm~25mm). Fit for outside diameter range of 1/4"- 1" wiring, lines, hoses or cables to a panel or frame application..
  • Widely Used: Clamps are marine grade. Perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration. No matter in salt water/air environment..
  • Environmentally Friendly: It can be reused and recycle if you do not want them to stay on the original place thanks to the high quality material which makes them worked last for years..
  • Package Included: You will receive 65 Pieces cable clamps in compartmenta....
Check Stock

C.K T5410 10m Mighty Rod Cable Rod Set

  • Triple bonded steel connectors for extreme torsion and tensile strength - threaded, crimped and glued.
  • High sheen fibreglass composite rods minimise snagging and splintering.
  • Slimline connectors reduce snagging and provide accessibility through smaller holes.
  • 5 mm rods offer the optimal balance of rigidity and flexibility for the majority of cable routing requirements.
  • Set contents: 10 piece of 1 m rod, 1) cable hook, 1) Mini eye and ring, 1) 190 mm coiled steel flexi lead and 1) 5 mm adaptor.
Check Stock

Cable Tie Gun Tool By ZNXN, Metal Zip Tie Tool Set With 200pcs Self-locking Stainless Steel Cable Ties Width4.6MM Length270MM,11.3 x 6.69 x 1.85 inches

  • [Package Detailes]:1pc stainless steel cable tie tool and 200pcs self-locking stainless steel cable ties 4.6MM*270MM*0.25MM.
  • [Application of Cable Tie Tool]:This kind stainless steel zip tie tool is mostly used for self-locking stainless steel cable ties for fastening and tensioning cutting..
  • [Cutting Range of Metal Zip Tie Tool]:This kind stainless steel cable tie tool is suitable for self-locking stainless steel cable ties width 4.6MM-12.0MM, thickness within 0.3MM.
  • [Type of Cable Ties]:This cable ties is stainless steel cable ties with self-locking function, so don't worry about the loosen after cable tie tool fastenting and tensioning and cutting this cable ties..
  • [How To Use]:After the stainless steel cable tie is tightened, pull up the cutter bar of metal cable tie tool, then the stainless steel cable tie will be cut off easily and cleanly without sharp edges..
Check Stock

Swagman Anti-wobble 1/2\ Threaded Hitch Pin and 8' Cable

  • For use with Swagman Universal Racks fits 1-1/4" threaded receiver bar.
  • Tubular high security key allows for easy access with only a half turn to unlock.
  • Triple chrome plated for maximum rust protection.
  • 8 feet long 10mm security cable with hitch pin.
  • 10mm braided steel security cable locks your bikes to your bike rack.
  • Cable goes through bike frame and attaches to the locking hitch pin.
Check Stock

Dymoece Universal Bicycle Shifter Cable Housing Bike Derailleur Cable Hose Kit for Shimano Sram MTB Road Bike

  • 2500mm x 4.0 mm shift cable housing.PVC material,low temperature and intense heat resistant.
  • Included 2100mm front inner derailleur cable and 2100mm rear inner cable,long enough to custom the shift cables length.
  • This derailleur cable is made of high-carbon steel, corrosion resistant and durable.
  • Ideal replacement for Shimano,Sram,BMX,Road bike,MTB bike,folding bike etc.
  • Package includes: 1 pcs 2.5m shift housing cable + 2 pcs shift cables(front 2.1m rear 2.1m) + 10 pcs housing End Caps+ 5 pcs C clips + 4 pcs cable end crimps + 3 pcs isolation protection clip.
Check Stock

Dymoece Universal Bicycle Shifter Cable Housing Bike Derailleur Cable Hose Kit for Shimano Sram MTB Road Bike

  • 2500mm x 4.0 mm shift cable housing.PVC material,low temperature and intense heat resistant.
  • Included 2100mm front inner derailleur cable and 2100mm rear inner cable,long enough to custom the shift cables length.
  • This derailleur cable is made of high-carbon steel, corrosion resistant and durable.
  • Ideal replacement for Shimano,Sram,BMX,Road bike,MTB bike,folding bike etc.
  • Package includes: 1 pcs 2.5m shift housing cable + 2 pcs shift cables(front 2.1m rear 2.1m) + 10 pcs housing End Caps+ 5 pcs C clips + 4 pcs cable end crimps + 3 pcs isolation protection clip.
Check Stock

TRLREQ Universal Bicycle Shifter Cable Housing Set for Shimano Sram Derailleur/MTB Road Bike (Black)

  • ღThis derailleur cable is made of 3 layer:outer double PVC plastic layer.
  • heated alloy steel bunch layer and PETT inner pipe,temperature resistance,intense heat resistant with rapid and sensitive performance..
  • ღIncluded 4mm Diameter cuttable shift cable housing - 2000mm,1550mm front inner derailleur cable and 2100mm rear inner cable,long enough to custom the shift cables length..
  • ღWorks For Shimano or SRAM Front & Rear Derailleur universal,BMX,Road bike,MTB bike,folding bike etc..
  • ღPackage includes: 1 pcs 2m shift housing cable + 2 pcs shift cables(front 1.55m rear 2.1m) + 10 pcs housing End Caps+ 4 pcs S-buckles + 4 pcs cable end crimps + 4 pcs isolation protection clip..
  • ღCome with other cable and cable housing fittings like brake cable cover ends S-buckles Wire cover ends, protect the bike from scratches and keep the bike cable neat..
Check Stock

Battery Cable Crimping Tool Battery End Crimper Lug Crimper Tool for 8, 6, 4, 2, 1, 1/0 AWG Heavy Duty Wire Lugs with Wire Shear Cutter, Crimping Tool 4AWG by BOOTOP PIN

  • ...ith a spring loaded locking pin to keep the heads in place. Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs..
  • 【High Quality,ERGONOMIC DESIGN】Battery lug crimping tool made of high quality carbon steel which can offer long service life. Hexagonal rotating dies of Lug Crimper Tool are processed with Wire EDM Cutting, more accurate than normal casting dies. Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. The handle of the wire crimper is ergonomic lever structure design helps you use less effort when crimping..
  • 【Cable Cutter】Heavy duty wire crimper tool comes with cable cutter made of chrome vanadium steel with induction-hardened & beveled cutting edges for maximum strength and durability. Shear-type jaw for easily cutting through aluminum and copper cable up to 1/0 AWG. (Not for use on steel or ACSR type cable).
  • 【Warranty & Package】:180 Days Warranty. Feel free to contact us by emails if you have any problems. This battery cable crimper kit contains 1 Pack Battery Cable Lug Crimping Tool, 1 Pack Cable Cutter,12PCS ring terminal connectors,12PCS 3:1 Dual Wall Adhesive Heat S....
Check Stock