Categories

Best 11kg Servo

Weytoll 30KG Motor Servo High Torque Metal Gear Digital Servo Waterproof for RC Car Robot Boat with 25T Arm Control Angle 180°

  • 【Motor Servo】- This 30kg servo offers a full range of 180° with metal gears..
  • 【Large Torque】Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60° - 0.17sec/60°, peak stall torque: 29.5kg.cm - 32kg.cm..
  • 【High Quality】- High performance digital standard servo,equipped with strong gears,Dual ball bearings.
  • 【Application 】- Digital servo can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • 【Accessories 】Connector wire length 12.6 inches(32cm),and also send with a 25T metal servo arm.
Check Stock

BETU 2Set 25KG (7.4V/2S) High Torque RC Digital Servo，Waterproof Full Metal Gear Servo with 25T Servo Horn（180°）

  • 【Super Large Torque 25kg Servo】Super Large Torque， Maximum torque is up to 25 kg/cm (280.5 oz/in)@7.4V(2s). Very strong, excellent range of motion, and includes a 25T metal horn..
  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arms.
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
Check Stock

4Pcs MG996R Servo Metal Gear Torque Digital Servo Motor for Smart Car Robot Boat RC Helicopter

  • MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed, tension and accuracy all increase..
  • Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, JR..
  • Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Stable and shock proof, metal gear, connector wire length 300mm..
  • Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft for DIY..
Check Stock

Adeept AD002 4 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

Adeept AD002 2 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

AEDIKO MG995 Servo Motor Control 180 Angle Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG995)

  • Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
  • Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
  • Latest Version: Micro Servo Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
  • Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys.
Check Stock

9imod 45KG High Torque Servo,Waterproof Servo Motors,Metal Gear Coreless Servo,8.4V HV Digital Servo,Full Aluminum Case for RC Servo 1/10 1/8 Crawler Car

  • 1.Waterproof Servo: IP67 high waterproof grade allows you to play your RC model in drippy environments..
  • 2.High Torque and Voltage Servo:6.0V -8.4V high oprate voltage.This 45kg waterpoof steering servo's maximum torque is up to 45 kg/[email protected],controllable angle range from 0 to 180 degrees..
  • 3.Full Metal Gear Coreless Servo:Equipped with stainless steel gears,full CNC aluminium shell,less noise,light weight.Dual ball bearings.Excellent linearity,high speed servo precision control..
  • 4.Widely Use Servo Motor:Compatible with 1/5,1/6,1/8,1/10,1/12 Scale Clawer Truck,TRX6,scx10,RC Car/Robot/Boat/Mechanical Arm/Quadcopter and other remote control models..
  • 5.Standard Dimension RC Servo: 1.57 x 0.78 x 1.91 inch(40 x 20 x 48.6 mm).
  • Weight:2.65oz (75g).with 25T Metal Servo Horn..
Check Stock

ZOSKAY 1X DS3218 Update servo 20KG Full Metal Gear Digital servo Baja servo Waterproof servo for Baja Cars(Control Angle 180)

  • DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66.
  • High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings.
  • Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°（PWM 500-2500μs）.
  • High performance digital standard servo for any crawler.
  • and for robot joint activities,TRX 4 Traxxas， SMT10 Mega Truck， SCX10 II，ARRMA Nero 1/8…..
  • Package Included: 1 x Digital Servo 1.58x0.79x1.60inch (40x20x40.5mm).
  • Weight: 60g (2.12oz) 1 x 25T Adjustable metal servo arm.
Check Stock

BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car/Robot/Boat

  • High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control..
  • All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy..
  • Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
  • With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories..
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

AGFRC 55KG Digital-Steering-Servo High-Torque Programmable - Full Metal Gear Brushless Servo for 1/8 1/10 RC Models, Control Angle 180° (A86BHM)

  • 【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc..
  • 【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in).
  • 【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer..
  • 【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot..
  • 【SATISFIED CUSTOMER SERVICE】Please read the detail description of this RC car brushless servo motor first, if any ideas about our high torque digital servo, contact us first & We will provide you a better solution, and make you satisfied..
Check Stock

5pcs K-Power 3.7g / 4.3g Plastic Gear Micro Mini Servo for rc Airplane car DIY arduino Robot (4.3g Micro servo)

  • [4.3g Micro servo,Super light-weigh] 100% Brand New and Sub-Micro Airplane Servo 4.3g.Dimension:20.8*8.2*19.3mm / 0.8*0.3*0.8in.
  • [Strict production and quality control] of plastic components ensure happy and safety use.
  • [Coreless Motor] Provides high speed, incredible efficiency, and low power consumption.Torque:0.8kg-cm/4.8V.
  • [Analog circuit design for high precision and high efficiency] Fine workmanship,good performance and easy to install..
  • [Application] Suitable for use in RC Airplane and Fixed Wing Glider.
Check Stock

[4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock