Categories

Best 120mm Case Fans

Zalman SF140 RGB Computer Fan 140mm High Performance Cooling Fan for Gaming PC with Biomimetics 140mm

  • High Airflow Mesh Panel: The front mesh panels has small holes on the side and a clear front panel to allow for high volume of air to enter and exit....
  • White LED Fans Included: Case has 4x 120mm white LED fans pre-installed, including 3 in the front and 1 in the rear. Case can accommodate up to 6 fans....
  • A Smoky Acrylic Side Window: Clear side panel provides great view of white LED fans inside the case.
  • Convenient Interface: Power Control Button, Reset Button, Audio Ports, USB 2.0, USB 3.0, Fan Controller.
  • Maximum VGA Length: 360mm, PCI Expansion Slots: 7, Radiator Support: 120mm & 240mm.
Check Stock

Rosewill ATX Mid Tower Gaming PC Computer Case, Tempered Glass, Supports 360mm GPU/360mm AIO Liquid Cooling, 4 x 120mm RGB LED Pre-Installed Case Fans with Remote Control - CULLINAN MX RGB

  • The Coolest RGB LED Effect for Gaming Computer: The RGB gaming pc case with tempered glass demostrates the extraordinary RGB LED lighting effect with a remote controller. It allows user to adjust the RGB effects as solid LED color and Pre-programmed color modes (Rainbow, Gradient, Blade and Breath.) to show off your case..
  • Tempered Glass Design to Show Gaming Desktop: The gaming case with tempered glass is surrounded with 3 sides of tempered glass to display your gaming computer desktop. ROSEWILL CULLINAN MX is a high quality tempered glass mid tower ATX computer case which is surrouned from the front and 2 sides. That makes ROSEWILL CULLINAN MX an elegant and misterous computer gaming case..
  • Optimized Ventilation & Generous Expansion: With 4x pre-installed fans, including three 120 mm blue LED case fans in the front and one 120mm fan at the rear offers excellent airflow makes it an outstanding ATX gaming case. Gamers are also allowed to install up to 170mm CPU Cooler and 360 mm Water-cooling Radiator in the front, 280 mm Liquid-cooling Radiator on top..
  • Quite Operation & Top-Mounted Multiple I/O Ports: With the 5mm tempered glasses all around and quiet operated fans, this gorgeous computer case aims to provide the quiest level of computer ....
Check Stock

Vetroo AL600 Mid-Tower ATX PC Case, Top 360mm Radiator Support, 3x120mm ARGB Fans, 3x120mm Regular Fans, Airflow Mesh White Gaming Case w/ Controller Hub

  • Pre-installed 6x 120mm Fans: Pre-installed 3x 120mm ARGB fans in the front and 3x 120mm regular fans in the rear and bottom provides the better airflow for the case and components..
  • Support Top 360mm Radiator: With support for up to a 360mm liquid cooling radiator in top, the case is easy to build with and easy to cool your CPU better..
  • Three Airflow Channel: Pre-installed fans and two fan locations next to the motherboard can provide the great airflow for the CPU, GPU and case in the same time..
  • Controller Hub Included: You can customize RGB lighting and speed, create vivid, dynamic lighting and speed synchronized with the rest of your system..
  • Door Opening Design: Hinged and magnetic tempered glass side panle with hand provide convenient to remove without any tools..
  • Multi-Functional I/O Panel: You can directly control the lighting of ARGB fans via reset button if you connect the reset cable to the 2-Pin interface of controller..
  • Cable Management System: 2 wire combs are included behind the motherboard tray to aid in cable management and keep your case more cleaner..
Check Stock

GIM ATX Mid-Tower PC Case Black 10 Pre-Installed 120mm RGB Fans Gaming PC Case 2 Tempered Glass Panels Gaming Style Windows Computer & Desktop Case USB 3.0 I/O Port, Water-Cooling Ready (Black)

  • 【Powerful Cooling System】10pcs 120mm GIM ARGB fans are pre-installed for the case to provide lighting and excellent air performance at the same time, keep cooling. And GIM Gaming Case supports ATX, Micro-ATX and Mini-ITX motherboards. (The actual fans you received may change depending on the shipment batch).
  • 【More Space】Gaming pc Case has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard.
  • 10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
  • 【ARGB Lighting System】: Mid-Tower ATX Gaming PC Case comes with 10 GIM KB-11 RGB case fans(120mm white Addressable speed adjustable fans) and 1 RGB Backplate and 1 GIM hub. The ARGB lighting system can be controlled via the include remote, create an amazing lighting show while providing great cooling..
  • 【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where....
Check Stock

Vetroo MESH6 Mid Tower ATX PC Gaming Case, 6X 120mm ARGB Fans Pre-Installed, Controller Hub Included, Mesh Front & Tempered Glass Side Panel Computer Cooling Case

  • 【UNIQUE PANEL DESIGN】The diamond-shaped mesh front panel and transparent tempered glass side panel make your case distinctive, and improve the airflow performance..
  • 【6 ARGB FANS】Pre-installed 4pcs 120mm ARGB fans in the front and 2pcs fans in the rear, provide your case the excellent cooling, colorful lights and unlimited color transformation..
  • 【CONTROLLER EQUIPPED】The controller can control 6pcs pre-installed fans. With 5V ARGB interface, it can be connected to the motherboard to synchronize light effects..
  • 【SUPERIOR COOLING SOLUTION】The case supports up to 10pcs Fans at the same time, It also has room for up to 240mm/280mm water cooler on the top and 120mm water cooler on the rear. Provide the best airflow and keep your case cooling all the time..
  • 【SUFFICIENT INTERNAL SPACE】Compatible with ATX, Micro-ATX, Mini-ATX motherboard, support Max CPU height of 165mm and GPU length of 350mm, it can install 3 SSD drive and 2 HDD for your computer..
Check Stock

Zeus GAMDIAS Gaming ATX Mid Tower Gaming Computer PC Case with Tempered Glass and ARGB LED Strip, RGB Motherboard Sync

  • ... cooling radiator on the front and top, up to 120mm of 6 fans and 350mm long graphics card, high CPU cooler up to 168 mm, additional 2.5" SSD trays at the back panel, and easy-access dust filters at the top.
  • Excellent Air Flow for Low Temperature: The Mid Tower ATX PC Case is allowed to upgrade for Top: 2 x 120mm, 2 x 140mm computer case fans.
  • Rear: 1 x 120mm for outstanding ventilation. With AIO coolers up to 360mm for the front and top, it's the best gaming case to keep your PC temperature low..
  • Innovative and Extraordinary Design: Gamdias Mid Tower Case with innovative front RGB lighting panel with mixed glossy and matte black design brings the gaming PC chassis market a different and elegant design choice and makes your system builds astonishing..
  • Great Expandability for Your System Config.: With 2 x 3.5” HDD bays or 2 x 2.5” HDD Cages/ 2x 2.5" Tray, USB3.0 x1, USB2.0 x2, and the LED button, the desktop pc case gives DIY builders ultimate flexibility to personalize their PC. Furthermore, it supports different mobo from EATX, ATX, Micro-ATX, Mini-ITX . 7 expansion slots all....
Check Stock

Rosewill FBM-X2-400 Black Steel / Plastic Mini Tower Computer Case 400W Power Supply

  • Sleek Design: Build an elegant office style system or a simple performance gaming PC within this versatile, compact and sturdy steel/plastic mini case.
  • Spacious Interior: Equipped with four expansion slots, one internal 3.5" drive bay, three internal 2.5" drive bays and supports a microATX or mini ITX motherboard.
  • Pre-Installed 400W Power Supply Unit: FBM-X2-400-HELIX PC case includes CE and FCC certified non-modular 400W PSU.
  • Great Cable Management: Easily organize cables and wires inside the straightforward desktop PC case.
  • Excellent Airflow: Includes one pre-installed 120mm fan in rear, supports two additional 120mm fans in front and two 120mm fans on top, or one 240mm radiator in the front.
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

Vetroo AL600 Pink Mid-Tower ATX PC Case, Pre-Installed 3x120mm ARGB Fans, 3x120mm Regular Fans, Top 360mm Radiator Support High-Airflow Computer Gaming Case with Controller Hub

  • Pre-installed 6x 120mm Fans: Pre-installed 3x 120mm ARGB fans in the front and 3x 120mm regular fans in the rear and bottom provides the better airflow for the case and components..
  • Support Top 360mm Radiator: With support for up to a 360mm liquid cooling radiator in top, the case is easy to build with and easy to cool your CPU better..
  • Three Airflow Channel: Pre-installed fans and two fan locations next to the motherboard can provide the great airflow for the CPU, GPU and case in the same time..
  • Controller Hub Included: You can customize RGB lighting and speed, create vivid, dynamic lighting and speed synchronized with the rest of your system..
  • Door Opening Design: Hinged and magnetic tempered glass side panle with hand provide convenient to remove without any tools..
Check Stock

Apevia Matrix-PK Mid Tower Gaming Case with 1 x Tempered Glass Panel, Top USB3.0/USB2.0/Audio Ports, 4 x RGB Fans, Pink Frame

  • Stylish contemporary mid-tower computer gaming case with 1x tempered glass window (left), stylish RGB front panel with cooling slots, & 4x RGB fans preinstalled (outer ring glows).
  • Supports standard ATX, Micro-ATX, and Mini-ITX motherboards, USB3.0/USB2.0/HD Audio ports, and improved cable management.
  • Supports video cards up to 350mm in length & CPU coolers up to 160mm in height.
  • Room for up to five 120mm fans & supports up to 240mm radiators in the top and front.
  • Room for up to five 120mm fans & supports up to 240mm radiators in the top and front. Fans are proprietary to this case..
Check Stock

Gamdias ATX Mid Tower Gaming Computer Case for Desktops and PC, 2X 200MM ARGB LED Lighting Case Fans Sync with Motherboard, Side and Front Tempered Glass, Aesthetics and Stylish Design

  • ...Your System:Supports up to 360mm/240mm/120 liquid cooling radiator on the front and top, up to 120mm of 6 fans and 350mm long graphics card, high CPU cooler up to 168 mm, additional 2.5" SSD trays at the back panel, and easy-access dust filters at the top.
  • Excellent Air Flow for Low Temperature: The Mid Tower ATX PC Case is allowed to upgrade for Top: 2 x 120mm, 2 x 140mm computer case fans.
  • Rear: 1 x 120mm for outstanding ventilation. With AIO coolers up to 360mm for the front and top, it's the best gaming case to keep your PC temperature low.
  • Innovative and Extraordinary Design: Gamdias Mid Tower Case with innovative front RGB lighting panel with mixed glossy and matte black design brings the gaming PC chassis market a different and elegant design choice and makes your system builds astonishing.
  • Great Expandability for Your System Config.: With 2 x 3.5” HDD bays or 2 x 2.5” HDD Cages/ 2x 2.5" Tray, USB3.0 x1, USB2.0 x2, and the LED button, the desktop pc case gives DIY builders ultimate flexibility to personalize their PC. Furthermore, it supports different mobo from EATX, ATX, Micro-ATX, Mini-ITX . 7 expansion slots allow you to fully utilize your motherboard’s expandability.
  • Clean Design for Component Assembly: With....
Check Stock

ROSEWILL ATX Mid Tower Gaming Computer Case, Gaming Case with Blue LED for Desktop / PC and 3 Case Fans Pre-Installed, Front I/O Access Ports(CHALLENGER S)

  • Classic and Professional Design: ROSEWILL CHALLENGER S is a typical mid tower pc computer case with a gaming look to leverage the gaming practice and a solid gaming computer case comes with a blue LED case fan at the front for excellent gaming systems.
  • All-Around Airflow: With 2x front blue LED 120mm and 1x rear 120mm computer case fans per-installed, the gaming case (CHALLENGER S) aims to create the best airflow for any gaming system. ROSEWILL CHALLENGER S can not only give the excellent ventilation but also the easy access I/O ports at the front.
  • Spacious Internal: The ATX case pre-installs 2x front blue LED 120mm and 1x rear 120mm and support another 2x 120mm gaming case fans (optional). Easy to customize interior components with screw-less design for 5.25″ external drive bays and 3.5″ HDD.
  • Hassle-free Installation: The ATX mid tower case offers tool-less installation of the 2.5″ drives and 3.5″ drives for a hassle-free build. Plus, the case has a bottom-mounted dust filter that protects the power supply from the threat of dust.
  • Great Expandability: With up to five internal 3.5” drive bays and two external 3.5” drive bays, the Rosewill CHALLENGER gives DIY builders ultimate flexibility in personalizing their PC. It’s ....
Check Stock

120mm PC Computer Case Fan Dust Filter Grills with Magnet and Screws, Ultra Fine Nylon Mesh, Black Color - 4 Pack

  • 【Block Dust Great】Upgrade Ultra Fine Nylon Mesh (80 Meshes) could Effectively Block Most of the Dust or Pet Hair, Great for Keeping Your Fans and Computer Clean, Extend the Life of Computer Hardware.
  • 【Keep Airflow Good】Ultra Fine Nylon Mesh Would not Block of the Airflow From the Fans, Keep Fans Efficiency and Air Circulation in the Case, Keeping Cooling.
  • 【Magnet and Screws】Item Frame with Magnetic Strip and Screw Holes, Could Fixation Adapted to Various Material Conditions.
  • 【Compatible with】Most 120mm x 120mm Fans or Vents (Note: item's Magnet can attract iron case only, Not attract aluminum case).
  • 【Package Includes】4x Magnetic Nylon Filter + 16x Screws.
Check Stock