Categories

Best 120vac Relay Home Depot

SparkFun Qwiic Single Relay-Up to 5.5A at 240VAC Multiple I2C addresses Available Turn on/Off high Power Device from Low Power microcontroller No Soldering Large Power Loads w/Simple I2C Commands

  • Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino compatible board or another low powered microcontroller? No soldering needed to get started. Plug and play. Code available. Small footprint..
  • The Single Relay board can handle up to 5.5A at 240VAC for long periods of time and allows you to control large power loads with simple I2C commands. Utilizing our handy Qwiic system, and on-board screw terminals, no soldering is required to connect it to the rest of your system!.
  • The Qwiic Relay comes with a default I2C address of 0x18 but can be changed with a simple command allowing you to control over 100 Qwiic Relays on a single bus (but please be aware that toggling lots of relays on a 3.3V bus can cause voltage spikes so an external power supply will be required)!.
  • In addition, there is an address jumper on the back of the board. Closing this jumper with solder will change the address to 0x19..
  • Operating Voltage: 1.7V-3.6V. Coil Resistance: 23.5Ω. I2C Address: 0x18 (Default), (Jumper changes to 0x19). Max Current (Through Relay): 5.5A (240 VAC).
Check Stock

SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C

  • This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
  • The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
  • Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
  • Includes: 1x Qwiic Quad Solid State PCB. 4x Solid State Relay - 40A (3-32V DC Input). 8x 4-40 Hex Nut. 8x 3/8in. Phillips Machine Screw - 4-40 Thread. Hook-up Wire 8" - 22 AWG (Red). Hook-up Wire 8" - 22 AWG (Black).
  • Assembly required. Tools are not included. You will need a screwdriver and wire clippers/strippers..
Check Stock

Baomain SSR-60DA 60A Solid State Relay Module 4-32VDC / 24-480VAC + Heat Sink

  • Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
  • Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
  • Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
  • This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
  • Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
Check Stock

Functional Devices RIB2401B Power Relay, 20 Amp SPDT, 24 Vac/dc/120 Vac Coil, NEMA 1 Housing

  • Product Type: Power Relay with Terminal Wires.
  • Easy to use: Attached with crimping terminals wires for worry-free installation..
  • Package Content : 2 x Power Relay, 10 Terminal Wires.
Check Stock

heyous 30pcs Waterproof Wire Connectors Nylon Grease Cap Outdoor Electrical Nuts Caps 11mm x 21.5mm, Black

  • Price For: Each Standards: UL Listed, CUL, CE, Cus Hz: 50/60 Lead Length: 16" Item: Enclosed Pre-Wired Relay Indicator Type: LED NEMA Enclosure Type: 1 Contact Form: SPDT Features: 1/2" NPT Nipple, LED Indicator Contact Amp Rating (Resistive): 20A @ 277VAC, 5A @ 480VAC Contact Material: Silver Cadmium Oxide HP @ 120V: 1 Coil Volts: 24VAC/DC, 208 to 277VAC.
  • Response Time: 18 msec HP @ 240V: 2 Dimensions: 2.3"H x 3.2"W x 1.8"D Application: Power Nipple Size: 1/2" NPT Country of Origin (subject to change): United States.
Check Stock

Hoffman TB3R103 3R Terminal Box, 100A, 3 Phase

  • Price For: Each Contact Material: Silver Alloy Green Environmental Attribute: RoHS Compliant Item: Plug In Relay Base Type: Octal Socket: Mfr. No. 70-750E8-1, 70-750DL8-1, 70-464-1, 70-169-1 Contact Form: DPDT Pins: 8 Coil Volts: 120VAC Standards: UL Listed, CSA Certified, CE Marked Socket Code: A Contact Rating: 10A @ 277VAC/30VDC Push To Test: Lockable.
  • Status Indicator: LED and Mechanical Flag Country of Origin (subject to change): China.
Check Stock

Anfukone T92P7A22-240 Power Relay, DPST-NO, 240VAC, 30A, Panel

  • It is perfect used in the remote control, communication, automatic control system, electronic equipment's..
  • Relay contacts : 003cbr003e Terminals 1 and 8 public points ；003cbr003e Terminals 2 and 7 Relay Coil Voltage.
  • 003cbr003e Terminals 3 and 6 N/O Normally Open.
  • 003cbr003e Terminals 4 and 5 N/C Normally Closed.
  • Total Size (Approx. ): 1. 4" x 1. 4" x 2. 6".
  • 003cbr003ePackage : 1 x Power Relay & Socket..
Check Stock

ENERWAVE ZWN-RSM2-PLUS-NEW Z-Wave Plus Dual Module, Hidden Smart Switch, Single Pole, 120-277VAC, 10A Per Relay, Neutral Wire Required, ZWN-RSM2-PLUS, Black (New Version), White

  • Enerwave Z-Wave Plus Dual Relay is the most advanced and customizable module you can add to your existing appliances and lights. Module can be installed in wall boxes behind switches and outlets or in ceiling boxes behind ceiling fans or chandeliers. Hidden relay allows you to use original switches and decorative wall plates.
  • Remotely turn your appliances (lights, fans) on and off from an internet-connected smartphone, tablet, or computer. Program Z-Wave relay switch in scenes, groups, and associations. Dynamic scheduling and control from anywhere. Z-Wave hub required.
  • Z-Wave Plus, featuring 67% improvement in range, 250% more bandwidth, Over The Air (OTA) firmware updates. Backwards compatible with existing Z-Wave devices.
  • 120-277VAC, 10A maximum load per relay. Not compatible with security panels such as Honeywell Panel, NORTEK (2GIG) Security & Control Panel. ETL-listed, FCC compliant. Dimensions: length 2.03” x width 1.72” depth 0.62”.
  • Get into IoT with the best home automation device. Connect your Z-Wave hub to Alexa or Google Assistant for full voice control. Compatibility with Alexa, Google Assistant, or IFTTT is dependent on the Z-Wave hub that is installed.
Check Stock

KETOTEK Temperature Humidity Controller Module AC 120V Humidity Regulator Thermostat Humidistat Cooling Heating Humidifier Dehumidifier Switch for Incubator Greenhouse

  • 【Safe, lightweight and versatile】Made in ABS material for safer use, this temperature and humidity controller is small and lightweight. It can be....
  • 【Dual output】This humidity regulator can control temperature and humidity at the same time, and can be connected with cooling or heating device....
  • 【High precision】This humidity switch is equipped with high-precision temperature and humidity sensor probe, delivering accurate and stable....
  • 【Specification】Power supply: 120Vac, Output: Max 10A 120Vac(10A Relay inside, please use Load current .
  • 【Security alarm】Alarm when temperature or humidity exceeds high / low temperature humidity setting value, alarm when sensor error or temperature /....
Check Stock

DUNSI STC-1000 Temperature Controller Waterproof Sensor Heating Cooling LED STC1000 STC-1000 Digital Dual Relay Thermostat Incubator Aquarium 110 Volt AC 110V 2m Fahrenheit Temp Control

  • ...UALITY】DUNSI premium STC-1000 Digital Temperature Controller is made of high quality ABS heavy-duty and anti-flamming plastic shell material which can use for a long time.designed with compressor delay protection, it will alarm when temperature exceeds temperature limit..
  • 【MAIN SPECIFICATION】DUNSI Digital Dual Relay Thermostat (110v) Keeps temperaure in desired range and guaranteed accuracy.Fully utilize the stc microcontroller and NTC probe to this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC)..
  • 【OPTIMAL PERFORMANCE】DUNSI premium upgrade STC-1000 Temperature Controller has 2 Relays.Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time.No more frequently wirring change between heater and cooler. Every piece of our products is strictly inspected before sale..
  • 【WIDE APPLICATION】DUNSI STC-1000 Dual Relay Thermostat Controller with 2m Waterproof probe can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating ger....
Check Stock

CENTAURUS STC-1000 Temperature Controller Waterproof Sensor Heating Cooling LED STC1000 STC-1000 Digital Dual Relay Thermostat Incubator Aquarium 110 Volt AC 110V 2m Fahrenheit Temp Control

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade STC-1000 Temperature Controller has 2 Relays.Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time.No more frequently wirring change between heater and cooler. Every piece of our products is strictly inspected before sale..
  • 【HIGH QUALITY】CENTAURUS premium STC-1000 Digital Temperature Controller is made of high quality ABS heavy-duty and anti-flamming plastic shell material which can use for a long time.designed with compressor delay protection, it will alarm when temperature exceeds temperature limit..
  • 【MAIN SPECIFICATION】CENTAURUS Digital Dual Relay Thermostat (110v) Keeps temperaure in desired range and guaranteed accuracy.Fully utilize the stc microcontroller and NTC probe to this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC)..
  • 【WIDE APPLICATION】CENTAURUS STC-1000 Dual Relay Thermostat Controller with 2m Waterproof probe can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling h....
Check Stock

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check Stock

36volt 18amp Golf Cart Battery Charger for Ez-go

  • 36Vdc, 18Adc Output, 120 Vac 60 Hz Input.
  • Universal IEC Input Connector with A.C. Line ‘Power-Good’ and Disruption Green/Red L.E.D Indicator.
  • Output Connector Type: EZgo 2-Pin 'D' Shaped 36V Connector (Powerwise or TXT).
Check Stock