Open SFP Slot A Pair of 1.25G/s Gigabit Fiber Ethernet Media Converter 10/100/1000Base-Tx to 1000Base-SX SMF RJ45 to SFP Slot, Support SFP Gigabit modules up to 120KM(2 Pack)

  • What You Get: 2pcs Gigabit Ethernet SFP Slot media converters.
  • 1 x User’s Manual. Support wide power supply voltage (100V-240V), Power Supply: 5V-1A, UL Certified..
  • Supports Multi-mode or Single-mode fiber using different SFP modules (not including any SFP transceiver).
  • Convert and extend different networks over a LC fiber cable connection up to 120KM (depends on the SFP transceiver).
  • RJ45 Port: 10M/100M/1000M Auto-negotiation, full Duplex or half Duplex, Auto-negotiation, Supports MDI/MDIX auto-crossover, Complies with IEEE 802.3/802.3u/802.3z/802.3ab..
  • Fiber Optical Port: 1.25Gbps 1310-nm wavelength SFP port, connecting the BiDi transceivers up to 30-120km.
  • Fiber Type: SMF, Cable Type: UTP/STP Cat.5e for 100 meters..
  • Plug & Play: Simply plug in optical port and RJ45 port, and it will work immediatelly. Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status. Supports jumbo frame size 9K bytes.
  • Supports working temperature range from 0°C to 60°C..
Check Stock

TP-Link Gigabit SFP module | 1000Base-LX Single-mode Fiber Mini GBIC Module | Plug and Play | LC/UPC interface | Up to 10km distance (TL-SM311LS)

  • Single-Mode MiniGBIC module, Supports full-duplex.
  • Wave Length: 1310nm. Data Rate: 1.25Gbps. Port Type: LC/UPC.
  • Max. Cable Length: 12.4miles (20km) for 9/125um Single-Mode Fiber.
  • Always keep the protective dust plug on the SFP’s optical bores until you are ready to make a connection.
  • Compatible with all SFP ports on TP-Link product including JetStream switches, and media converter MC220L.
Check Stock

A Pair of 1.25G/s Bidi Gigabit Single-Mode Fiber Ethernet Media Converter with 2PCS Bidi SFP LC Transceiver Module Included, 10/100/1000Base-Tx to 1000Base-SX SMF RJ45 to SFP Slot up to 30KM

  • What You Get: 2pcs Gigabit Single-mode Ethernet SFP Slot media converters.
  • 1 x User’s Manual. Support wide power supply voltage (100V-240V), Power Supply: 5V-1A, UL Certified..
  • Fiber Optical Port: 1.25Gbps 1310-nm wavelength SFP port, connecting the BiDi transceivers up to 30km(2 SFP LX Transceiver included).
  • Fiber Type: SMF, Cable Type: UTP/STP Cat.5e for 100 meters..
  • RJ45 Port: 10M/100M/1000M Auto-negotiation, full Duplex or half Duplex, Auto-negotiation, Supports MDI/MDIX auto-crossover, Complies with IEEE 802.3/802.3u/802.3z/802.3ab..
  • Plug & Play: Simply plug in optical port and RJ45 port, and it will work immediatelly. Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status. Supports jumbo frame size 9K bytes.
  • Supports working temperature range from 0°C to 60°C..
  • 【100% Money Guarantee】15 years OEM factory competency, Most efficient technical support with superb processing technology.★Our committed to provide the best product and services to every customer..
Check Stock

INVAXON Gigabit SFP LC Single-Mode Transceiver for Cisco GLC-LH-SMD/GLC-LH-SM/SFP-GE-L, 1000BASE-LX/LH, Meraki MA-SFP-1GB-LX10, Mikrotik, D-Link, Supermicro, Netgear 1310nm, 20km DDM/DOM

  • INVAXON Transceiver for Cisco GLC-LH-SMD/ GLC-LH-SM/ SFP-GE-L - Compatible for Cisco, Cisco Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, Netgear, TP-Link, Broadcom, Linksys and Other Open Switches..
  • Data Rate (max): 1.25 Gb/s;Distance: 10-20km - Single Mode, LC duplex connector, DDM.
  • 1000Base-LX/LH, SFP transceiver module for SMF, 1310-nm wavelength, dual LC connector.
  • We have factory with R&D can develop all of CISCO compatible transceivers ,all the products 100% test with CISCO switches before shipping.
  • This 1.25G transceivers are widely applied for datacom, telecom, fttx, data center, security monitoring, smart grid and other industries..
Check Stock

a Pair of 1.25G SFP Bidi Transceiver 1000Base-BIDI 1490nm/1310nm SMF up to 20 km for Cisco GLC-BX-D Ubiquiti UniFi UF-SM-1G-S Mikrotik D-Link Supermicro Netgear and More.

  • Wide Compatibility - for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, Netgear, TP-Link, Broadcom, Linksys and Other Open Switches..
  • We are a professional manufacturer and accept customized orders. If necessary, please contact us for customized SKU to meet your needs. Products will....
Check Stock

LC to LC Fiber Patch Cable Single Mode Duplex - 3m (9.84ft) - 9/125um OS1 LSZH - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This fiber OS1 LC LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
  • This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) – LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

LC to LC Single Mode Insensitive Fiber Patch Cord - Duplex - 2M - UPC/UPC - 9/125um OS2 100G (5 Pack) / - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality and Insensitive LC to LC Fiber Grade: G.657.A2 Patch Cable Single mode 9/125 OS2 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This Beyondtech Fiber OS2 9/125 LC/LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm – 0.22 dB/km at 1310 nm.
  • This LC to LC Single mode Duplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends..
Check Stock

CableRack 1 Meter LC to LC Single Mode Fiber 9/125 Fiber Patch Cable (5-Pack)

  • ...tch cable solutions are critical to high speed network solutions in the datacenter. These sm fiber patch LC have the Ultra Physical Contact (UPC) type polish on the connectors which is an industry standard for single mode LC patch cable connectivity. Single mode fiber patch cables compatible with both 1GB and 10GB (1310nm and 1550nm wavelength) applications..
  • Single mode patch cable solutions from CableRack have been deployed at businesses large and small, in government and defense applications. No other LC fiber jumper will provide the reliable connectivity of the CableRack brand. These fiber cable LC LC fiber patch cables are made with the most common polarity, which is Type A to B Crossover (Most Common for Duplex Patch Cords). Our LC LC fiber cable are standard OFNR riser rated zipcord with yellow jacketing..
Check Stock

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (1M, OM3-5Pack)

  • Beyondtech Pre-terminated connectors on both ends LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This fiber OS1 LC LC 1 Meter LSZH Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM singlemode fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
  • This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

BEYONDTECH SC/APC to SC/APC Fiber Patch Cable Single Mode Simplex - 1m (3.28ft) - 9/125um OS1 / 3.0mm LSZH (1 Pack) - Fios Cable Replacement PureOptics Cable Series

  • Beyondtech high-quality and Insensitive SC to SC Fiber Grade: G.657.A2 Patch Cable Single mode 9/125 OS2 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This Beyondtech Fiber OS1 9/125 SC/SC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications. Cable also know as: Fiber Optic Internet Cable..
  • This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm - 0.22 dB/km at 1310 nm..
  • This SC to SC Single mode Simplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be ....
Check Stock

Fiber Attenuator Singlemode Simplex LC/UPC Fixed 2dB

  • [MAIN PARAMETER]: LC/UPC Female to LC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

Networx Fiber Optic Attenuator, Fixed - LC/UPC 20dB

  • [MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

MokerLink 5 Port Gigabit Industrial DIN-Rail Network Switch, 4 Gigabit Ethernet, 1 Gigabit SFP Slot with 20KM LC Module, IP40 Rated Network Switch (-40 to 185°F), with UL Power Supply

  • This network switch include 4 gigabit ethernet ports, 1 gigabit SFP uplink with 1310nm 20km LC single module, support long-distance optical fiber transmission. Switching capacity up to 14Gbps, with better data performance.
  • The shell is made of industrial-grade aluminum alloy, which is more sturdy, surface groove design, better heat dissipation, integrated DIN-rail mount kit, installation and disassembly are very simple.
  • IP40 protection grade, working temperature -40~75°C(-40~185°F), super robustness, anti-lightning, anti-static and anti-overload protection, adapt to various harsh environments.
  • Dual power supply, automatic fault switching, anti-reverse connection does not damage the equipment, higher reliability, equipped with one UL-certified power adapter, can be used without additional purchase.
  • Support auto-negotiation, plug and play, no configuration needed, low-power consumption CPU, no fan quiet operation, green energy saving, suitable for various networks, such as home office, computer room, warehouse, factory, compact control box and other industrial scenarios with Ethernet access.
Check Stock