Categories

Best 140mm Water Cooler

Electric Gel Ball Blaster, Splatter Ball Blaster High Speed AKM-47 with 20,000 Water Beads Suitable for Boys Kids Adults Age 12+

  • ...h and development of computer accessories. R & D product lines include: CPU air-cooled radiator, case fan, thermal silicone pad, thermal silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities..
  • 【Product specification】Thermalright FS140 BLACK V3.
  • CPU Cooler dimensions: 140(L)x146(W)x160(H)mm (5.51×5.75×6.3inch).
  • heat sink material: aluminum, CPU cooler is equipped with metal fasteners of Intel & AMD platform to achieve better installation. The offset asymmetric layout is allowed to installation on first graphics card slot, and the height is compatible with memories within 62mm..
  • 【2 PWM Fans】TL-C12B and TL-D14B, Standard size PWM fan:120x120x25mm (4.72×4.72×0.98 inches) and 140x152x27mm (5.51×5.98×1.06 inches).
  • Noise Level≤25.6dB(A). The high speed of the dual fans will greatly improve the cooling effect, which can easily take away the hot air and prevent the CPU from running normally due to high temperature..
  • 【AGHP technique】4x8mm heat pipes apply AGHP technique, Solve the Inverse gravity effect caused by vertical / horizontal orientation, cp....
Check Stock

Scythe Kaze Flex 140mm Fan, PWM 300-1800RPM, Quiet Case/Radiator Fan, Single Pack

  • 140mm PC fan with standard mounting space, the fan is ideal for computer case ventilation and water cooling radiator..
  • Sealed Precision Fluid Dynamic Bearing: the bearing and the spindle are made of high quality compressed metal and are lubricated by a special oil film resistant to temperatures of up to 250C° / 480F°. This drastically reduces friction, ensuring smooth operation and reduced wear, which results in long life span and silent operation..
  • Included antivibration rubber pads covering each corner of frame. These decouplers effectively reduce possible vibrations and allow silent operation..
  • Newly designed blade and frame contribute high airflow with low noise, ideal thermal fan for computer case and CPU cooler/heatsink. PWM control offers wide range fan speed for various application and system..
  • Connector: 4-Pin, Dimension: 140x140x25mm, Fan speed: 300±200~1800±10% RPM, Airflow: 16.8~100.8CFM, Noise: 4.19~26.45dBA, Static Pressure: 0.08~2.81mmH2O, MTTF: 120,000hrs.
Check Stock

Easycargo 4pcs 80mm Fan Grill 80mm Guard Black with Screws (80mm)

  • High Quality Material: This computer fan filter grill is made of the PVC and magnet, which is soft and durable, easy to clean and do not rust..
  • Size Information: The PC fan dust filter size is 120mm x 120mm x 0.45mm or 140mm x 140mm x0.45mm, (Chose the size you want), the mesh holes diameter approx. 0.8mm..
  • Excellent Dust Resistance: The fan filter provide great dust reduction properties, which is great to keep your computer fans and computer parts clean. Using this filter can reduce the dust and hair getting in cooler fans..
  • Magnetic Design: The pc fan filter use the magnetic frame design which is easy installation and removal..
  • What You Get: Come with 5 pcs 120mm x 120mm (or 140mm x 140mm) black computer fan filter grills. In addition to the PC, please use it for products that require a dust filter or cover such as a speaker grill. (Chose the size you want)..
Check Stock

140mm Case Fan Quiet High Performance PC Fan 140mm Standard Case Fan 3pin 4pin Molex Connector 12V DC Computer PC CPU Case Fan 1000RPM 2-Pack

  • ❤ STANDARD CASE FAN:140x140x25mm 140mm fan quiet silent 12v dc 0.38A cooling fan for the replacement of standard computer case fan ,gaming PC fan ,CPU cooler fan or other electronics equipment heat sink radiator.the fan's speed can be adjusted by using a different voltage (5-12V), it can work at a lower voltage to achieve a silent effect..
  • ❤ 3-PIN CONNECTOR: 140mm 3 Pin connector fan for easy installation.4pin motherboard power port to suitable for more than 2 kinds of 140mm fan using..
  • ❤ ANTI-VIBRATION SCREWS: Besides 4pcs normal screws there has extra 4pcs anti-vibration silicon screws packed together to reduce noise between fan and PC case..
  • ❤ PACKAGE INCLUDED:140mm long life sleeve bearing case fan x 2 ,Silicone screws x 8, fan screws x 8..
  • ❤ 100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose..
Check Stock

Cryorig R1 Ultimate Dual Tower Heatsink for AMD/Intel CPU - Black

  • Total Height 168.3mm Width 142mm Depth 140mm. Please check with your case manufacturer for CPU Cooler Clearance Height..
  • DirectCompress Soldering for 10% more contact surface compared to traditional soldering, and the more contact surface the faster the heat conduction..
  • Jet Fin Acceleration System squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System allows....
Check Stock

DeepCool CK560 WH Mid-Tower ATX Case, Airflow Front Panel, Full-Size Tempered Glass Window, 3X 120mm ARGB Fans, 1x 140mm Fan, E-ATX Motherboard Support, Front I/O USB Type-C, White

  • DeepCool CK560 WH PC case was designed following the latest PC component requirements to create an high-airflow gaming case without being too bulky which widely supports motherboards E-ATX, ATX, Micro-ATX and Mini-ITX.
  • CK560 WH features cross pattern on the front panel to maximize ventilation in the gaming case, quick-release design makes the front panel can be easily removed from the case and mounted back to the position with the magnets and bottom hooks.
  • High-compatibility CK560 WH ATX gaming case is compatible with 360mm AIO radiator on front or 280mm radiator on top, meanwhile, maximum 175mm CPU air cooler height limitation offers more choices for mighty dual-tower cooler with 140mm fans like DeepCool Assassin III.
  • DeepCool CK560 WH PC case has an efficient cooling system thanks to the pre-installed three front ARGB fans and a 140mm rear non-ARGB fan which allows ample airflow, CK560 WH supports up to 6pcs 120mm or 5pcs 140mm fans to build High-airflow wind channel in the gaming case.
  • DeepCool CK560 WH gaming case maximize potential with flexible configurations of any system setup, which supports PSU up to 160mm and 380mm GPUs in length, meanwhile, an adjustable built-in GPU bracket provides extra support extra weight for graphics card to avoid sag.
Check Stock

Corsair CC-9011023-WWCORSAIR Carbide 200R Compact ATX Case

  • Case Expansion Slots : 7. Radiator Compatibility- 120mm.
  • 240mm, Case Drive Bays(x3) 5.25 inch (x4) 3.5 inch (x4) 2.5 inch.
  • Compatible Corsair Liquid Coolers: H55, H60, H75, H80i.
Check Stock

Cooler Master NR200P MAX SFF Small Form Factor Mini-ITX Case Custom 280mm AIO 850W SFX Gold PSU Triple-slot Vertical Mount GPU PCIe Gen4 Riser Tempered Glass or Vented Panel NR200P-MCNN85-SL0

  • Cooler Master’s First MAX: The MAX line delivers tailor-made building platforms with maximum performance and hardware compatibility..
  • Custom 280mm Radiator: A custom 280mm radiator, two pre-installed SickleFlow PWM 140mm fans, and a highly acclaimed 3rd gen Cooler Master pump or CPU block provides reliable cooling for the CPU..
  • SFX 80 Plus Gold: NR200P MAX implements a 850W Gold certified PSU with custom length textured 16 AWG cables specifically designed to cover all performance needs..
  • Premium PCIe Gen4 Riser: Equipped with a premium PCIe Gen4 Riser Cable to ensure both maximum compatibility and performance with all graphics cards..
  • Triple-Slot GPUs: NR200P MAX supports vertical, triple-slot GPUs up to 336mm in length and 140mm in height.
  • four 6 plus 2 pin power cables included..
Check Stock

PHANTEKS PH-TC14PE 5x?8mm Dual Heat-Pipes Dual 140mm Premium Fans and Quiet CPU Cooler with patented P.A.T.S coating

  • ...onto corresponding metals at a quicker rate. With this technology, the Phanteks PH-TC14PE enhances thermal conductivity on the soldered surfaces of the heat-pipes through the copper deposits.-Designed with dual tower radiators.
  • the PH-TC14PE has five ψ8mm heat-pipes linearly aligned to ensure optimal cooling. This cooler is made to have the least amount of air and thermal resistance..
  • Phanteks PH-F140 premium 140mm fans uses Updraft Floating Balance (U.F.B) bearing, nine Maelstrom Vortex Booster (M.V.B) blades, and Maelstrom Air-Fort Optimization (M.A.F.O) drive system to achieve massive airflow and perfect dynamic balance. to reduce noise level, the fan emits a low dBA with the support of the anti-acoustic rubber-pad and rubber-bar to help eliminate vibration.-The SoliSku universal mounting kit provides an easy-to-install rotational back plate for Intel LGA 2011/1155/1156/11366/775. AMD AM2/AM2+/AM3/3+/FM 1 ( stock back plate required ). -The PH-NDC is a superb quality thermal compound for heat sinks. It is made of high-purity nano diamond like particles to improve the thermal conductance between components. The generated heat caused by the CPU will transfer to the heatsink, without reduction in efficiency and resistance..
Check Stock

Amay Countertop Hot and Cold Water Cooler Dispenser, 3 to 5 Gallons, Child Safety Lock, with Energy Saving Switch

  • 【Economic Energy Heating】: This water cooler comes with an Energy Switch to help you save energy consumption, it keeps hot water at 140℉. When the heating function is turned on, it can be quickly heated to 194℉. This desktop water cooler dispenser is made of high quality ABS plastic..
  • 【Child Lock& Storage】This tabletop water cooler has Child safety Lock for hot water spigot to protect children from burns. A small storage in the desktop water dispenser allows you to store disposable cups or coffee tea packs..
  • 【Removable Bottle Holder】The top loading bottle holder of water dispenser should be cleaned regularly. Thus, our removable bottle holder design is very easy to clean. Keep our drinking water healthy..
  • 【Electronic Refrigeration and Heating】: We use electronic cooling technology, to always keep your water cold in the summer heat waves. The heating system uses the same technology to heat your water and prepare your favorite hot beverages, very convenient in during winter season. Perfect for your bedroom, studio, office, grocery store and so on..
  • 【Large capacity】This counter top water dispenser easily holds a 3-5 gallons water bottle or jug. Our water cooler will let you reduce the cost of constantly purchasing water, helping you ....
Check Stock

Zalman CNPS17X High Performance CPU Cooler w/ 4D Patented Corrugated Fin & ARGB 140mm Fan, 5 Heat Pipes, 200W TDP, 180 Air Holes, FDB Bearings, Award Winning, 5 Year Warranty (Fits Intel & AMD)

  • High Performance Cooler: Patented 4D Stereoscopic Corrugated cooling fins increase heat dissipation area by 15%. The heatsink is composed of 180 individual airflow passages that quickly move hot air outward..
  • ARGB 140mm Fan: Large 140mm addressable RGB fan move large amount of cool air into the CPU and rapidly move hot air out. The fan has a unique dual-bladed spider design that maximizes airflow performance. Supports motherboard addressable RGB sync (3-Pin, 5V).
  • Built for Advanced Cooling: Reverse DTH Technology (RDTH) is combined with an Interactive Heatpipe Transfer Design (IHD) for extreme efficiency in the heat transfer from the CPU to heatsink, resulting in extraordinary cooling performance.
  • Dimension: 140mm(L) x 100mm(W) x 165mm(H)/ Weight: 700g / Heat Pipes: 6 / TDP: 200W / Material: Copper, Aluminum / Fan Speed: 800-1500 RPM / Air Flow: 61 CFM / Max Noise Level: 29.0 dBA / Voltage: 12V Fan, 5V LED / Connector: 4-Pin PWM, 3-Pin Addressable RGB.
  • Compatibility: Intel LGA 2066 /2011-V3 /2011 /1200 /115X, AMD AM4/ AM3+/ AM3.
Check Stock

Zalman CNPS20X Extreme Performance CPU Cooler w/ 4D Patented Corrugated Fin & Dual ARGB 140mm Fans, 6 Heat Pipes, 300W TDP, 350 Air Holes, Award Winning Cooler, 5 Year Warranty (Fits Intel & AMD)

  • Proven Extreme Performance: The CNPS20X is a multiple award-winning cooler with Patented 4D Corrugated Fin technology that features 350 air passages that direct hot air away from the CPU and improves the heat dissipation area by 15%.
  • ARGB 140mm Fans: Two large 140mm addressable RGB fans move large amount of cool air into the CPU and rapidly move hot air out. The fans have a unique dual-bladed spider design that maximizes airflow performance. Supports motherboard addressable RGB sync 3-Pin, 5V.
  • Built for Advanced Cooling: Reverse DTH Technology RDTH is combined with an Interactive Heatpipe Transfer Design IHD for extreme efficiency in the heat transfer from the CPU to heatsink, resulting in extraordinary cooling performance.
  • Dimension: 140mm x 170mm x 165mmH/ Weight: 1300g / Heat Pipes: 6 / TDP: 300W / Fan Speed: 800-1500 RPM / Air Flow: 61 CFM / Max Noise Level: 29.0 dBA / Voltage: 12V Fan, 5V LED / Connector: 4-Pin PWM, 3-Pin Addressable RGB.
  • Compatibility: Intel LGA 2066 /2011-V3 /2011 /1200 /115X, AMD AM4/ AM3+/ AM3.
Check Stock

GPU Fan Cooler PCI Slot Triple 92mm 90mm Graphic Card Fans for Video Card VGA Cooler Fans Compatible with Tesla K80 R9 280 GTX 580 Nvidia GTX 970 RX570 r9 390x EVGA RTX 1080ti 2070 2080Ti

  • ❤UNIVERSAL GPU COOLER: PCI slot fan gpu cooler3 x 92mm mining rig fans xfx gpu cooler with total size 278x125x30mm (10.94x4.92x1.18inch) designed for most universal graphic card video card VGA cooling mining rig frame ,just please check the size to make sure your pc has enough space..
  • ❤5V 7V 12V VOLTAGE: 1x Power D-type interface cable ,four interface with 5V 7V 12V voltage sticker,choose different voltage to get airflow: 56CFM ,84CFM ,140CFM and different noise level..
  • ❤FAN SPLITTER CABLE:1x 4Pin fan splitter cable,you can combine 3x92mm fans into one interface to be connected with voltage cable.ignore it,Each fan can be worked independently,easy operation and replacement..
  • ❤PACKAGE INCLUDED: 3x92mm fans(PCI bracket screwed), 1x multi-voltage cable ,1x fan splitter cable..
  • ❤100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose..
Check Stock