Categories

Best 15amp Inline Fuse

Rockville USS10 10 800w Slim Under-Seat Powered Car/Truck Subwoofer Sub+Amp Kit

  • Package Includes: (1) Rockville USS10 10" 800w Slim Under-Seat Active Car/Truck Subwoofer Sub, (1) Rockville 10 Gauge Amp Wire Kit ANL Fuse Holder....
  • Features of USS10: Rockville USS10 800 Watt 10” Slim Car Subwoofer, 800 Watts Peak / 200 Watts RMS, PWM MOSFET Power Supply, Low Level RCA Input,....
  • Fuse Rating : Single 25A. Details of USS10: Maximum Power RMS : 200 Watts, Impedance : 2 Ohm, Dimensions : 15 x 10.89 x 2.9 (L x W X H) Inches,....
  • Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable,....
  • Gold Plated AGU Heat Resistant Fuse Holder, 40 Amp ATU Inline Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt....
Check Stock

10ga Fuse Holder 2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse Holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses

  • 10 AWG thick red pigtail wire allow you to splice it into any project..
  • Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine.
  • Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.
Check Stock

UNEEDE 10 Pack Fuse Inline Fuse Holder ATC/ATO Add-a-Circuit Car Fuse Holder TAP Adapter 16 Gauge 20AMP Blade Automotive Fuse Holder Waterproof Heavy Duty Wire Fuse Holder with 10 pcs 15 AMP Standard

  • SAFETY PROTECTION: Heavy duty 16 AWG fuse holder, great look and added protection to the circuit. And easy to add additional circuits for all cars, CD players, fax machines, etc.
  • SUITABLE FOR MUITILPLE FUSES: Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A ATC/ATO blade fuse.
  • WATERPROOF FUSE HOLDER: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is inline fuse holder extremely safe and reliable.
  • SUPERIOR QUALITY: High-quality materials ensure high fatigue resistance, melting resistance and excellent electrical conductivity which allows easy installation of additional circuits without cutting or spicing.
  • PACKAGE INCLUDE: 10 x 16AWG 5.9in ATC/ATO Blade Fuse Holder with 10 pcs 15AMP Standard fuses.
Check Stock

yueton Pack of 10 AC 15A 125V Black Electrical Panel Mounted Screw Cap Fuse Holder

  • Heavy Duty 10 Gauge Red Color Wire Fuse Holder..
  • Inline Fuse Holder for ATC/ATO Blade Fuse..
  • Waterproof Lid for a Rainy Day, This item is Safe and Reliable..
  • High Quality, Supports 12V Fuse up to 40A..
  • Package Included 6 x Fuse Holder and 6 x 40Amp Fuse..
Check Stock

MulWark 2 Pack 10 Gauge Tinned Copper Marine Wire Waterproof IP67 Inline Fuse Holder Pigtail Blade Fuse Block Relay with 40AMP Automotive Fuses Set for Car Truck ATV Boat Motorbikes

  • PACKAGE INCLUDED: 2 x standard inline fuse holders and 2 x 40Amp standard blade fuse. Our car fuse can be easily identified by the white mark amp rating figures on the top and allows checking top pins for continuity.
  • SAFETY PROTECTION: The heavy-duty 10 gauge (AWG) tin-plated copper wire features an excellent oxidation resistance that adds protection to the circuit of your car alarms, GPS, car recorder, dashboard camera, VCD player, etc.
  • WATERPROOF DESIGN: The gauge fuse holder is equipped with a tight-fitting, waterproof rubber cap with IP67 waterproof rating for maximum prevention of water, dust, and dirt from getting in.
  • PREMIUM QUALITY WIRE: High-quality soft red pigtail silica gel wire makes it easier to strip than other materials. What’s more, the 30cm wire length ensures convenient installation on almost all kinds of automotive devices.
  • WIDE APPLICATION: Support ATC/ATO standard blade fuse of 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A, easy to use and ideal for car truck, boats, RVs, ATVs, Jeeps, Motorcycles, and much more.
Check Stock

10 Gauge Fuse Holder - 10 AWG Inline Fuse Holder with 40 AMP ATC Blade Fuses 4pack

  • Heavy duty 10 (AWG) Gauge red color wire Allow you to splice it into any project..
  • Inline fuse holder for ATC/ATO blade fuse..
  • Package included 4 x fuse holder and 4 x 40Amp fuse..
  • Water resistant, This fuse holder comes with cap to seal out moisture..
  • Fuse holder dimension (42x35x13mm),Support up to 40A Standard fuses for 12V..
Check Stock

12V 30A Circuit Breaker Reset Fuse PowMr Reset,Audio Inline Fuse Holder 30 amp with Manual Reset for Car Audio Stereo Switch and Solar Inverter System 2 Pack

  • Ampere Range : 30 Amp Car Audio Inline Circuit Breaker/Disconnect Fuse Holder 12V-24V DC.
  • Stops Power Surges From Damaging Your Amps ,Protects Your Trolling Motor From Electrical Damage.
  • Easy to use and durable, mount on panel or firewall. Save Your Money to Replacing inline fuse holder.
  • Unique Push Button Reset and Save Your Money to Replacing Fuses.
Check Stock

10Pack 10AWG in-line Mini Blade Fuse Holders and 20PCS Standard Blade Fuses (1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A 2pcs Each) for Motorcycle Car Truck Boat Fuse tap(Mini-FuseHolder), Black

  • 【10awg wire】High quality 10awg thick copper wire fuse holders, can withstand high voltage and current, not easy to get hot..
  • 【Waterproof design】 The rubber cap fits on tightly to protect any standard blade fuse inside,Prevent short circuit caused by splashing water..
  • 【Cable ring length】 35cm, 10awg thick copper wire, You can cut the cable for your installation..
  • 【10 different amp rating fuses】More choice for you，Fits for 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A,40A MINI/ATO blade fuse..
  • 【Package included】 10pack inline fuse holders + 20pcs fuses sets ( 1A/2A/3A/5A/7.5A/10A/15A/20A/30A/40A) 2pcs each..
Check Stock

Nilight - 50029R 120 Pcs Standard Blade Fuse 5A/7.5A/10A/15A/20A/25A/30A AMP Assorted Set with 10 Pack 14AWG ATC/ATO Inline Fuse Holder 2 Years Warranty 1 Count Pack of 10

  • Standard Blade Fuse: 0. 75 x0. 74 x0. 3 Inch. Fuse Type: Blade. Material: Zn alloy/Plastic. Protect your car and your electrical device from short circuit, overload etc.Material:plastic.
  • 10 Pack In-Line Fuse Holder: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit..
  • Safety Protection: Unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is an inline fuse holder extremely safe and reliable. Easy to use: Turn one fuse slot into two while providing protection for both circuits.
  • Suitable Fuses: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm.
  • Package Include: 10 x 14AWG ATC/ATO Inline Fuse Holder and 120 PCs standard blade fuse+Puller.
Check Stock

10 Gauge Fuse Holder - 10 AWG Inline Heavy Duty Wire Fuse Holder with 30 AMP ATC/ATO Blade Fuses for Automotive Car Motorcycle Marine RV 2Ft/60CM

  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine..
  • The heavy duty 10 gauge (AWG) tin-plated copper wire is made of high quality material with good electrical conductivity and melting resistance, also....
  • 10 gauge (AWG) thick pigtail wire allow you to splice it into any project..
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Package including: 10 Gauge Inline Fuse Holder with 30A 20A 15A Fuses, 2 years long time warranty, just contact us if you have any issues about the....
Check Stock

ZBSJAKU 250A Inline ANL Fuse Holder, 0/2/4/8 Gauge AWG ANL Fuse Block Holder with 250 Amp ANL Fuses for Car Audio Amplifier (2 Pack)

  • Heavy Duty 12 Gauge Red Color Wire Fuse Holder..
  • Inline Fuse Holder for ATC/ATO Blade Fuse..
  • Waterproof Lid for a Rainy Day, This item is Safe and Reliable..
  • High Quality, Supports 12V Fuse up to 30A..
  • Package Included 6 x Fuse Holder and 6 x 30Amp Fuse..
Check Stock

Bussmann CB285-30 Surface-Mount Circuit Breakers, 30 Amps (1 per pack)

  • ...ist if you are unsure about how to determine what type (this is a DC), amp (this is a 100A), and volt circuit breaker you require for your vehicle & vehicle accessories. A 1-300 amp circuit tester can be used to determine the draw of an accessory during initial, peak, and normal operation of the accessory, but this inline breaker is not a substitute for a sound professional installation. Always consult a professional before installation..
Check Stock

MGI SpeedWare Mini-ANL/MIDI Inline Fuse Holder with Cover and Bolt-Down Studs (50A Fuse)

  • Protect your automotive, truck, or marine electrical from short circuit.
  • Simple installation. Mount where you need it, connect your inline wires, and bolt down your fuse.
  • Cover ensures dust and moisture stays away from the fuse. A small window allows for quick visual inspection..
  • Fuse is easy to replace. Use with 12-24vDC mini-ANL or MIDI fuses up to 200 AMP.
  • Package includes: 1 x Surface-Mounted Fuse Holder with Cover and 50A Mini-ANL Fuse.
Check Stock