Sunlite BRAKESET SUNLT MX1000 ALY RRw/FT Bolt BK
- Used for brake systems of ordinary bikes, mountain bikes and road bikes..
- Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
- Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
- Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
- Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check StockOrbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H
- The 4 In. Flexible Mist Nozzle Extension can be used in place of a standard mist nozzle. The nozzle extends the mist spray another four inches in the mist line, and the wire memory allows the user to direct the mist wherever needed. This is especially useful on fixed fitting mist systems such the Orbit Performance PVC Mist Cooling System..
- FLEXIBLE: Allows for directional adjustment of the mist on a rigid mist line. Can be used to extend the misting nozzle around obstacles..
- COMPATIBLE WITH ORBIT MIST SYSTEMS: Screw into any 10/24 threaded mist nozzle opening..
- WATER EFFICIENT: Cool down without wasting water. These nozzles require minimal water use of 1/2 gallon of water per hour per nozzle..
- PRODUCT SPECIFICATIONS: Not for use on pressure boosted systems (160 PSI or above). For outdoor use with cold water only. Do not use in freezing temperatures..
Check Stockmistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)
- Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
- Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
- Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
- Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
- Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check StockHAYEAR 5MP USB2.0 C-Mount Digital Microscope Camera with Software Calibration Compatible with WIN7/8/10 Mac System +0.5X Eyepiece Lens 23.2mm Mounting /30mm 30.5mm Adapter
- Operation System: WIN8 / SP4 / XP / VISTA / WIN7 / WIN10.
- Frame rate:(MJPG) 2592 x [email protected].
- Frame rate:(YUY2) 2592 x [email protected].
- the 0.5X C-mount adapter is for microscope ,It can be used in all eyepiece position with 23.2mm or 30mm or 30.5mm. Of course, it can be used in phototube and trinocular tube with 23.2mm or 30mm or 30.5mm..
Check StockStar-Art Front and Back Disc Brake Kit - Aluminum Alloy Calipers, 2 Pcs Stainless Steel 160 mm Rotors & Cable & Brake Lever & 12 Bolts, Freewheel Threaded Hubs Hole Distance of 48mm
- Used for brake systems of ordinary bikes, mountain bikes and road bikes..
- Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
- Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
- Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
- Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check StockMakita PR00000034 1-3/8\ Welding Nozzle
- WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
- WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
- WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
- WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
- MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check StockYESWELDER 60 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40
- PACKAGE INCLUDED▶5 Pcs Cup-15 Pcs Electrodes-10 Pcs Ring-30 Pcs Tip(Standard).
- HIGH GRADE MATERIAL ▶100% brand new and high quality.
- APPLICATION ▶These consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch, these torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.*For 40 and 50 Amps Cutting Machine.
- CHARACTER ▶Plasma electrode tips nozzle extended shroud shield cup kit,plasma tip nozzle electrode extended cutting consumable.
- OUR PROMISE ▶We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time.
Check StockYESWELDER 110 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40
- APPLICATION ▶These consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch, these torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.*For 40 and 50 Amps Cutting Machine.
- HIGH GRADE MATERIAL ▶100% brand new and high quality.
- PACKAGE INCLUDED▶10 Pcs Cup-30 Pcs Electrodes-20 Pcs Ring-50 Pcs Tip(Standard).
- CHARACTER ▶Plasma electrode tips nozzle extended shroud shield cup kit,plasma tip nozzle electrode extended cutting consumable.
- OUR PROMISE ▶We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time.
Check StockFunrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)
- Nozzle Cleaning Kit: you will get 32 MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
- And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
- Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
- Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
- Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock4 Pcs Soldering Nozzles for Hot Air Gun SMD Rework Station 853d 862d Replacement
- [Great Compatibility]: 4 Pieces of hot air gun nozzles include 3 round nozzles of 5mm, 8mm and 10mm and 1 square nozzle of 13mm, compatible for 853D, 878D soldering station and other hot air guns, applicable to our soldering station models: YES0367, YES0368, YES0369, YES0370, YES0371, YES0372, YES0373, YES0374, YES0375, any inquiry is welcome.
- [Practical Usage]: Nozzles of different size and shape are ideal for regulating the hot wind size and shape to heat different kinds of electronic components, 24mm diameter nozzle interface adapts to many hot air guns, easy to be installed.
- [Useful Lock Screw]: With lock screw for locking the nozzle firmly to avoid hot air flow out from the gap between the nozzle and the heat gun air outlet steel pipe, and reduce temperature irregularity.
- [Durable Material]: Sturdy and durable metal material not easy to rust and damage, suitable for long time use.
- [Soldering Nozzle Size]: 3 Round nozzles sizes are 5mm, 8mm, 10mm.
Check StockMaster Manufacturing MMS-01-000N-MM Mist Sprayer, Black
- Attaches to existing spot or broadcast sprayer.
- Features 2-nozzle volute that can mist spray up to 75 feet.
- Mist tall trees with the manual 210° rotating fan.
- Comes standard with 160cc Honda GC160 OHV engine.
Check StockWangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer
- Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
- 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
- Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
- Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories
- 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
- Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
- Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
- When you use 3D printer nozzle brush to....
- Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
- Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check Stock