Categories

Best 190mm Nozzle

BEETRO HVLP Air Spray Gun 1.3/1.4/1.8mm Nozzle 1000ml Capacity 14.5CFM 30-43psi with 11 Filters 10pcs 190M Paint Strainers Air Control Valve 1/4 Connector and Type 2 Adapter

  • ...olume Low Pressure) technology provides a higher transfer of materials while reducing bounce back and overspray, increase transfer efficiency of the coating materials to the surface (up to 85%). With HVLP technology you also get a significant material savings, which is up to 30-40%.
  • Include 3 sets of stainless steel nozzle sets: The 1.3 mm and 1.4 mm nozzle sets are ideal for use with base coats, clear coats, single stage, primer-sealers, and other light to medium viscosity paint coating materials. The 1.8 mm nozzle set is ideal for primers, 2K primers, surfacers, and other medium to high viscosity paint coating materials.
  • No O-ring design, easy to clean with chemical agents and thinners. Super-precision external mix cap with filter for perfect pattern. Non-drip cup protects against paint wasting and ensures less mess, saving your time and money.
  • 3 adjustable knobs bring in concise painting: fluid control (needle adjust knob) regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow. Please always remember: THE MAX WORKING PRESSURE IS 3.0bar(43psi).
  • Can be used with WATER-BASED PAINT. Includes: Air spray gun equipped with 1.4mm nozzle, 1 set of 1.3mm nozzle, 1 set of ....
Check Stock

DILAKS 750W Paint Sprayer, HVLP Home Sprayer Gun with 1000ml Container, with 6 Nozzle Size for Different Painting Projects, Easy Spraying and Cleaning, Perfect for Indoor, Outdoor and Furniture

  • 3 spray patterns ( horizontal, vertical and circular )to speed up your painting projects. Adjust the air cap to change the spray pattern to meet different painting task.
  • 6 nozzle sizes (1.0mm/1.5mm/1.8mm/2.2mm/2.6mm/3.0mm) helps you easily handle with all kinds of paints. 1.0-2.2mm nozzle are great for thin paints like sealers and varnish. 2.6-3.0mm nozzle is great for spraying latex paint,chalk type paint and milk type paint.Please note that the blue nozzle(2.6mm) was installed in the gun.
  • Comes with 5-piece paint strainer. It can be used for eliminate dirt, dust, particulates, lumps or any debris that can affect your paint job by clogging your spray gun. Perfect for all painting projects, as they strain out particles down to 190 microns. and work for all types of solvent or water-based paints, stains, varnishes, epoxy, latex and other liquids. So before use this paint sprayer, please make sure to dilute the paint according to the instruction.
  • Detachable design, each spray parts can take apart with hands. To avoid paint clogging, make sure to clean every parts after each use.
  • Regulate the paint output by adjusting the flow control knob on the sprayer to get different paint output.
Check Stock

Gizmo Dorks Metal Copper Fill Filament for 3D Printers 1.75mm 200g

  • Metal Copper (Copperfill with PLA base) 3D printer filament vacuumed sealed with desiccant.
  • Extrusion nozzle temperature: 190 - 225 C.
  • 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
  • Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more..
Check Stock

eSUN Silk PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Silver

  • eSUN Silk PLA 3D Printer Filament Vacuumed Sealed With Desiccant..
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 190C - 220C.
  • 1KG net (approximately 2.2 lbs) Silk PLA Filament with New Black Spool.
Check Stock

Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 5kg, Black

  • PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant.
  • Recommended Nozzle Temperature: 190 - 225 C.
  • 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25".
  • PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more!.
Check Stock

HATCHBOX PLA 3D Printer Filament, Dimension Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm, Carbon

  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA (Polylactic Acid) Carbon Fiber 3D Printer Filament Vacuumed Sealed With Desiccant.
  • Recommended Extrusion/Nozzle Temperature 190°C - 230°C (87°F - 110°F).
  • Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".
Check Stock

Voxelab 3D Printer Filament, 1.75mm PLA Pro (PLA+) Filament, Dimensional Accuracy +/- 0.02 mm, 3D Printing Material 1kg/ Spool, Compatible with FDM 3D Printer/Pen (Natural)

  • 【Premium PLA Filaments】Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish..
  • 【1KG (2.2LBS) SPOOL 】Spool size: Φ200mm/7.87" flange, Φ53mm/2.09" hub hole, 65mm/2.56" width. Filament dimensional accuracy 1.75 +/- 0.02mm. PLA filament has minimal shrinkage and warping..
  • 【Vacuum Packaging】Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after opening the sealed package to prevent it becomes brittle or jams the nozzle..
  • 【Technical Specifications】Recommended Extrusion/ Nozzle Temperature 190°C - 220°C, net weight 1kg spool, hot bed 25°C - 60°C..
  • 【Wide Compatibility】Works and harmonizes perfectly with all common 1.75mm FDM 3D printers. Voxelab 3d filament 1.75mm is the most common and easiest to print with since it is cheap and does not have warping issues and has good adhesion to the bed..
Check Stock

3D BEST-Q PLA 1.75mm White 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1KG Spool, White

  • Weight: 1 KG (approximately 2.20 lbs) Spool.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 190°C - 210°C Base Plate/Print Bed Temperature: No heated~50C.
Check Stock

eSUN 1.75mm Clear PLA 3D Printer Filament 1KG Spool (2.2lbs), Glass PLA

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool, Dark Blue color.
  • eSUN PLA 3D Printer Filament Vacuumed Sealed With Desiccant. Clear Color.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 190C - 210C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

Gizmo Dorks PLA Filament for 3D Printers 1.75mm 200g, Glow in The Dark

  • PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant.
  • Recommended Nozzle Temperature: 190 - 225 C.
  • 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
  • PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more!.
Check Stock

Creality® PLA 3D Printer Filament - 1.75mm Diameter - 1kg/Spool (Grey)

  • Diameter: 1.75mm Weight: 1kg/Spool, Diameter tolerance is within ±0.02.
  • Recommended Extrusion/Nozzle Printing Temperature 190 - 220℃.
  • Recommended Build Platform Temperature 0 – 50℃.
  • Superb layer bonding, Vacuumed Sealed With Desiccant.
Check Stock

HATCHBOX TPU 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Shore 95A, White

  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) - Shore 95A Hardness.
  • TPU (Thermoplastic Polyurethane) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • Recommended Extrusion/Nozzle Temperature 190°C - 235°C (374°F - 455°F).
  • Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".
Check Stock

HATCHBOX TPU 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Shore 95A, Green

  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) - Shore 95A Hardness.
  • TPU (Thermoplastic Polyurethane) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • Recommended Extrusion/Nozzle Temperature 190°C - 235°C (374°F - 455°F).
  • Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".
Check Stock