Exhaust Back Pressure Ebp Sensor Tube For 2003 Ford E-350 Club Wagon For 2000-2003 Ford Excursion For 1999-2003 Ford F-250 Super Duty F-350 Super Duty For 2001-2002 Ford E-350 Econoline Club Wagon
- Ⓞ Turbo Pedestal: TP-38 Blank/Pedestal - Ford 7.3L Powerstroke (94.5-97).
- Ⓞ This is the most common use of the Non-EBPV pedestal, just eliminate the EBPV all together..
- Ⓞ Turbo Exhaust Housing: The TP38 High Flow Outlet allows for better exhaust flow since it doesn't have an exhaust back pressure valve built in..
- Ⓞ This is a required piece when you use the pedestal..
- Ⓞ Compatible with 1994.5-1997 Ford 7.3L Powerstroke Diesel.
Check StockLucaSng 5 inch Inlet 8 inch Outlet Polished Stainless Miter Cut Diesel Exhaust Stack(Stack Smokers 5 inch ID Inlet 36 inch Long With Clamp), Silver
- Inlet: 5", Outlet/Tip Size: 8", Length: 36" ,Polished Silver Finish.
- Made of High Quality T409 Stainless Steel ,OE replacement assembly.
- Fitment: Universal,For Truck, Ford, Dodge, Chevy.
- Installation should depend on the inside diameter and outside size.
- Miter Cut Diesel Smoker Exhaust Stack Tip For Diesel Exhaust Systems.
- Package includes: 1 Exhaust Tip with 1 Exhaust Clamp.
Check StockWith 126 Inch Wheel Base Muffler Exhaust Pipe for Ford Ranger 3.0 4.0 Only 98-03
- This is a brand new EAGLE BRAND Made in USA Oem Style Replacement Exhaust. This will fit: FORD , Ford Ranger 3.0L & 4.0L, with 6 Inch Wheel Base Note....
Check Stock
Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)
- 1-1/8 inch width x 1-1/2" height Stock Square Port.
- Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
- The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
- Remflex exhaust gaskets fill those gaps permanently.
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check StockLucaSng 5" Inlet 8" Outlet 36" Long Polished Stainless Steel Miter Angle Cut Diesel Smoker Exhaust Stack Tip(Smokers 5" ID Inlet 36" Long with Clamp)
- Made of High Quality Stainless Steel ,OE replacement assembly.
- Inlet: 5", Outlet/Tip Size: 8", Length: 36" ,Polished Silver Finish.
- Miter Angle Cut Diesel Smoker Exhaust Stack Tip For Diesel Exhaust Systems.
- Fitment: Universal,For Truck, Ford, Dodge, Chevy.
- Installation should depend on the inside diameter and outside size.
- Package includes: 1 Exhaust Tip with 1 Exhaust Clamp.
Check StockGarage-Pro Mirror Compatible with 2010 Ford Transit Connect Manual, Manual Folding, Non-Heated, Textured Black, Driver Side
- Direct Replacement Mirror Compatible with 2010 Ford Transit Connect.
- Evan-Fischer JCWFD199LGP Features: Paintable, Non-Heated, Manual Folding, Manual Glass.
- Replaces OE Number: 9T1Z17683A-PFM and Replaces Partslink Number: FO1320379.
- A high quality, Direct Fit OE Replacement Mirror, with FREE 1-year UNLIMITED mileage warranty coverage on Garage-Pro items.
Check StockLennox X7935 Healthy Climate MERV 16 Carbon Clean Filter 3 Pack
- 20x20x5 replacement whole house air filters for your furnace, air conditioner, heat pump, or HVAC system (actual size: 19.63" x 19.81" x 4.38").
- Compatible Models: Honeywell F25 (#203721), F35 / F35R (#FC35A1019), F100 / F150 (#FC100A1011), F200 (#FC200E1011), Lennox (X0585, X8305, X8308),....
- MERV 13 synthetic media (comparable with MPR 1500 - 1900 & FPR 10) protects homes from bacteria and more by trapping 98% of airborne particles without....
- Electrostatically charged, pleated (100% US made) filters capture more harmful particles and last 3x longer than fiberglass models.
- Industrial-grade beverage board (recyclable) frames with dual wire backings outperform standard cardboard designs.
Check StockLennox Model X0585 Air Cleaner Filter Media - 20 x 20 x 5
- 20x20x5 replacement whole house air filters for your furnace, air conditioner, or HVAC system (actual size: 19.63 x 19.81 x 4.38 inches).
- Compatible Models: Honeywell F25 (#203721), F35 / F35R (#FC35A1019), F100 / F150 (#FC100A1011), F200 (#FC200E1011), Lennox (X0585, X8305, X8308),....
- MERV 11 synthetic media (comparable with MPR 1000-1200 & FPR 7) protects homes from pets or allergies by trapping 95% of airborne particles without....
- Electrostatically charged, pleated (100% US made) filters capture more harmful particles and last 3x longer than fiberglass models.
- Industrial-grade beverage board (recyclable) frames with dual wire backings outperform standard cardboard designs.
Check StockLennox Corporation X7935 20x20X5 MERV 16 Filter Pack of 2
- 20x20x5 replacement whole house air filters for your furnace, air conditioner, heat pump, or HVAC system (actual size: 19.63" x 19.81" x 4.38").
- Compatible Models: Honeywell F25 (#203721), F35 / F35R (#FC35A1019), F100 / F150 (#FC100A1011), F200 (#FC200E1011), Lennox (X0585, X8305, X8308),....
- MERV 13 synthetic media (comparable with MPR 1500 - 1900 & FPR 10) protects homes from bacteria and more by trapping 98% of airborne particles without....
- Electrostatically charged, pleated (100% US made) filters capture more harmful particles and last 3x longer than fiberglass models.
- Industrial-grade beverage board (recyclable) frames with dual wire backings outperform standard cardboard designs.
Check StockEGR Valve Pressure Feedback Sensor - Compatible with 1994-2010 FordMercury Mazda Lincoln - Replaces# F77Z-9J460-AB DPFE15
- ...s - F77E9J460AA, F77E9J460AB, F77Z9J460AB, F7UE9J460AA, F7UZ9J460AA, DPFE15, 1L3Z9J460AA, 3S4Z9P449AA, 98BB9J460AB, E4ZZ9J460B, F6DZ9J433DD, F7DZ9J433AA, AJ9318211, AJ9318215, This EGR Valve Pressure Feedback Sensor is a direct replacement for Ford, Lincoln or Mazda part, easy to install..
- 1 Year Warranty - This EGR Exhaust Gas Recirculation Pressure Feedback Sensor comes complete with 1 year warranty. If the part ever fails on your Escort, F-250, F-350, Mark VIII or Town Car, simply contact us for a replacement or refund..
Check StockATXKXE Vacuum Cleaner HEPA Filter Replacement for Sears Kenmore EF-1, Part #86889 (EF-1*3)
- EF-1 Exhaust HEPA Filter Compare to Kenmore Canister and Upright Vacuum Cleaner Part # 86889, 20-86889, 53295, 40324.
- Also fit Panasonic Upright Vacuum Cleaner MC-V199H, MC-UG725, MC-UG727, MC-UG729, MC-GG525, MC-CG983.
- HEPA Media Filtration captures 99.97% of particles of dust, pollen and more, down to 0.3 micron.
- Quick and easy to replace, recommend to change the HEPA filter every 3 month.
- Contains 3 Vacuum HEPA Media Filter. Package Dimension: 6 x 4 x 2 inch.
Check StockDNA MOTORING CBE-FM96GTV8 Stainless Steel Cat Back Exhaust System [Compatible with 96-04 Ford Mustang GT V8]
- 【FITMENT】Compatible with 96-04 Ford Mustang GT V8.
- 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
- 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
- 【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
- 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check StockLEGO Creator Expert Ford Mustang 10265 Building Kit (1471 Pieces)
- Build and customize your very own 1960s Ford Mustang GT, featuring dark-blue bodywork with white racing stripes, 5-spoke rims with rugged tires, detailed interior, V8 engine and customization add-ons!.
- Customize this “American muscle car model” with the included supercharger, rear ducktail spoiler, beefy exhaust pipes, front chin spoiler and a nitrous oxide tank.
- Measures over 3-inch (10cm) high, 13-inch (34cm) long and 5-inch (14cm) wide.
- 1471 pieces – For boys and girls aged 16+ and for fans and big kids of all ages.
- This LEGO Creator Expert Ford Mustang 10265 set can be built together with all other original LEGO sets and LEGO bricks for creative building.
Check Stock
