iMeshbean® Submersible Well Pump, 4\ Deep Well Pump Stainless Steel with 33ft Power Cord, Heavy Duty (1HP-AC220V-33GPM-207' Max Head)
- ★【Technical Specifications】4",1HP, 230V, 5.1Amps , 60Hz,1-1/4” NPT discharge. 8 Impellers;Fits in a 4" casing.(★【NOTICE】This pump has a built in check valve. However installing additional check valve is recommended).
- ★【Economy & Effective】33GPM max & 207ft head;33ft lengthy electric cord -allows for easy connection.
- ★【Outstanding Performance】Stainless steel body& permanent magnet motors&thermoplastic impellers -industrial grade heavy duty - guarantees high durability and long-lasting use.
- ★【Widely Application】 Perfectly convenient for use at home and for factory usage.
- can be implemented in different types of wells-ash pipe wells, steel pipe wells, or soil wells;Can be used for extracting water from reservoirs, canals, rivers, open water tanks and other water lifting works.
- ★【 Built-in Controlbox】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection.
Check StockHoneywell PLS750C1000 Timer Switch with Sunrise Sunset Single or 3 Way
- Large white backlit display with a night light mode option for easy reading in dark areas.
- Works w/motors & all types of lighting (comp. W/electro. Ballasts, cfl. & tungsten up to 15A 1800W 1Hp.
- Solar timetable can be used simultaneously with daily events.
Check StockiMeshbean® Submersible Well Pump 110V with Control Box, 4\ Deep Well Pump 1.0 HP 33 GPM, 207' Head,100FT Power Cord,Stainless Steel
- 4" deep well submersible pump. 1HP, 110V, 10.2 Amps , 1-1/2” NPT discharge. Fits in a 4" casing..
- 33GPM max & 207ft head are greater than almost all other 1HP well pumps, and comparable to other pumps, but uses less electricity..
- 100' / 30M long electric cord comes with this submersible deep well pump..
- This pump has a built in check valve. However installing additional check valve is recommended.
Check StockiMeshbean® 4\ Deep Well Submersible Pump, 1 HP, 110V, 60 Hz, 33 GPM, 200' Head, Stainless Steel with Built-in Control Box & 100 Feet Long Electric Cord ,M#07
- ★【Technical Specifications】4",1HP, 115V, 10.2 Amps , 1-1/2” NPT discharge. 8 Impellers;Fits in a 4" casing..
- ★【Economy & Effective】33GPM max & 207ft head;100′ lengthy electric cord -allows for easy connection (the Plug and the Power Cord are Cut,you can extend or shorten the power cord depending on your needs.).
- ★【Outstanding Performance】Stainless steel body& permanent magnet motors&thermoplastic impellers -industrial grade heavy duty - guarantees high durability and long-lasting use.
- ★【Widely Application】 Perfectly convenient for use at home and for factory usage.
- can be implemented in different types of wells-ash pipe wells, steel pipe wells, or soil wells;Can be used for extracting water from reservoirs, canals, rivers, open water tanks and other water lifting works.
- ★【 Built-in Controlbox & Check Valve】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection;★【NOTICE】This pump has a built in check valve. However installing additional check valve is recommended.
Check StockiMeshbean® Deep Well Submersible Pump with External Control Box, 1 HP, 115V, 60 Hz, 33 GPM, 207' Head,100' Power Cord Stainless Steel, 4\ ,Long Life M#010 USA
- 4" deep well submersible pump. 1HP, 110V, 10.2 Amps , 1-1/2” NPT discharge. Fits in a 4" casing..
- 33GPM max & 207ft head are greater than almost all other 1HP well pumps, and comparable to other pumps, but uses less electricity..
- 100' / 30M long electric cord comes with this submersible deep well pump..
- NOTICE:This pump has a built in check valve. However installing additional check valve is recommended.
Check StockBLUEROCK Tools PTM50-C Electric Motorized Pipe Threader Threading Machine fits RIDGID Dies
- Threading machine pipe capacity: 1/2"-2"(DN15-DN50).
- 3 FUNCTIONS -- This electric threading machine has a 3 in 1 function—threading, cutting, and trimming. The clamping die is stable and reliable, the feed depth of the die can be adjusted for more accurate control.
- The cutting knife and trimming knife adopt alloy steel blade, which is fast, stable and efficient..
- POWERFUL MOTOR -- This 220V Pipe Threader applies 1HP/750W motor, it has compact structure and strong power. The speed is 23RPM, more efficient and labor-saving..
- AUTOMATIC TOOL RETRACTION -- This Power Pipe Cutting Threader adopts the inclined block automatic tool retraction design, without manual control, and can greatly improve the accuracy when machining the thread length..
- SELF OILING -- This Tube Cutter has an oil filling system with an oil reservoir, which fills oil through the head and has a constant flow..
Check StockAnnurssy Brackets & Hinge Assembly for Boat Engine Outboard Electric Trolling Motor
- Approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern).
- Works with 0-20hp motors with electric trim and tilt.
- The Mini Electric On The Fly Jack Plate is easy to install.
- Our jack plates can be raised and lowered by a up/down push button while on the water within seconds from top to bottom..
- 3 year warranty on the jack plate housing - 1 year warranty on the electric actuator.
Check StockSenco PC0968 Compressor, 1.5-Horsepower (PEAK) 2.5-Gallon
- Note: Item has a peak HP of 1.5HP and a running HP of 1HP.
Check StockCarbon Brushes 999038 for Hitachi Power Tool Motor
- Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
- Carbon motor brushes are one of the most components for power tool like electric drill..
- Worn brushes are often the cause of a poorly running motor.
- Replacing brushes can fix an intermittent motor..
- New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check StockWatersnake Venom 34lb Thrust Electric Motor (Fresh & Saltwater)
- STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
- CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
- ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
- VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check StockWatersnake Venom Swet 54 Pound Thrust 12V Electric Trolling Motor with 42\ Steel Shaft
- STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
- CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
- ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
- VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check StockHitachi 49C60 LVDS Cable Ribbon (Main Board to Panel)
- Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
- Carbon motor brushes are one of the most components for power tool like electric drill..
- Worn brushes are often the cause of a poorly running motor.
- Replacing brushes can fix an intermittent motor..
- New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check StockMophorn 1 Hp Electric Motor 3450 RPM 11.2-5.6 A Single Phase Motor AC 115V 230V Air Compressor Motor 56C Frame Suit for Agricultural Machinery and General Equipment
- Single Phase: The motor is 1HP single phase electric motor, features with 115/230V voltage and 11.2/5.6A full load amperage.
- Fitted Frame and Shaft: With 56C frame, the electric motor also has 1.875 inch length and 0.625 inch diameter keyed shaft.
- High Speed: The electric motor features 3450RPM rated speed and 3600RPM synchronous speed. High speed meets your different needs..
- Fan Cooled: Our electric motor is TEFC (Totally Enclosed Fan-Cooled) motor. A built-in fan helps to dissipate heat and prevent the motor from overheating..
- Universal Motor: Universal Motor- Universal used for the matching of water pumps, agricultural machinery and general equipment..
Check Stock