REED Instruments R5600 Insulation Tester and Multimeter (Megohmmeter), 2000 Ohms Resistance, 1000V Voltage
- Test voltage combinations: 250V, 500V or 1000V.
- 1mA test current for megaohm range at rated voltage.
- Large, easy-to-read dual display with backlight.
- Includes test leads, alligator clip, hanging strap, hard carrying case and batteries.
Check StockNautical Noobs: Noobtown Book 6 (A LitRPG Adventure)
- OWON ODP3063 Programmable DC Power Supply 3-ch output, 30V / 6A, max output power 378W, 480x320 pixels TFT color LCD.
- - Three independent controllable channels - Max output resolution: 1mV / 1mA.
- - Low ripples / low noise - Up to 100 group timers - Multi- working mode: individual, parallel, and series - Over-voltage / Over-current protection.
- - Data-logging function: could record the output voltage, and current.
- and display recorded data in chart - Auto-cooling system - 4 inch high resolution (480 × 320 pixels) LCD - Multi- CI: USB, RS232, and LAN - SCPI, and LabVIEW supported.
Check StockNorth American Rescue NAR C-A-T Tourniquet Pouch - Coyote - one Size
- coyote - newest design with identifier patch and elastic cap.
- the north american rescue combat application tourniquet pouch was specifically designed to allow personnel to place their nar c-a-t tourniquet on....
- it is made of 500d ir signature reduced nylon with molle/pals-style connectors..
- designed to fit the tactical black , trainer blue , or rescue orange c-a-t..
- does not include tourniquet also available in black and od (b00d8gz1ma).
Check StockUNI-T UT210E Mini Clamp Meter True RMS AC/DC Current Multi Tester Ohmmeter Volt Meter
- Ultra-portable tools for advance electricians, true rms response for ac current.
- 100A AC and DC current measurement with 1mA resolution, V.F.C function for measuring signal at varia.
- 600V ac and dc voltage measurement, resistance, diode, continuity and capacitance functions.
- Non-contact voltage detection with led indication, display backlight.
- Data hold, max, min, max-min, and zero mode.
Check StockAEMC MN103 AC Current Probe with 5' Lead, 1mA to 10A and 1A to 100A Range, 1mV/mA/1mV/A Output
- Clothes pin shape makes them ideal for use in tight areas, such as breaker panels, controller panels, or outlets.
- Permits very low AC current measurements.
Check StockAexit 10 x Circuit Protection Products Radial Lead Disc Voltage Dependent Resistors Varistors Varistors 14D151K
- Prodcut Name : Voltage Dependent Resistor.
- Max. Clamping Voltage (8/20 µS) : 250V (V@10A).
- Max. Peak Current (8/20 µS) : 6000A (1 Time).
- Body Size : 15 x 2mm/0.6'' x 0.08'' (D*T).
- Lead Size : 0.5 x 31mm/0.02'' x 1.2'' (D*L).
- Package Content : 10 x Voltage Dependent Resistor.
Check StockAmpeak Battery Charger Automotive 5A 12V Auto Trickle Charger Maintainer for Cars Motorcycles Trucks Boats Lawn Mower…
- 〓▶12V BATTERY CHARGER◀〓 100V-132V AC input, 5±0.2A constant charging rate.
- 5A fully automatic battery charger maintainer for 15-110Ah....
- 〓▶DUAL FEATURED FUNCTIONS◀〓 Unique design against the current reverse shock from your battery pack to the charger to extend the lifetime.
- 〓▶EFFICIENT 4-STAGE CHARGING◀〓 (Desulphation/Bulk Charge/Absorption/Float) Passed full-loaded and aging tests.
- 〓▶SAFETY CONTROL SYSTEM◀〓 No worry about Reverse Polarity/Over-Voltage/Short Circuit/Low Voltage/Over Current.
- 〓▶WHAT YOU WILL GET◀〓 1*Ampeak battery charger, 1*O-rings cable, 1*clips cable, 1*user manual.
- An 18-month warranty, 24H customer support,....
Check StockPhilips LED 417063 Energy Saver Compact Fluorescent T2 Mini-Twister (A19 Replacement) Household Light Bulb: 2700-Kelvin, 9-Watt (40-Watt Equivalent), E26 Medium Screw Base, Soft White, 4-Pack
- Universal input voltage - 120–277VAC 50/60Hz.
- Pout = 40W, Vout = 8-55VDC, Iout = 400-1400mA.
- Protection against line voltage on 0-10 V dimming wires.
- Custom programmable with 1mA resolution to perfectly match LED load and maximize performance.
Check StockLoulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-300V AC Output 0-5V DC
- Working Stability: annual change 003c 0.2%.
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Load Capacity: 2 times current continuous.
- Storage Environment:-40 to +115 degress Centigrade,20%-95% without condensation.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Working Environment:-25 to 80 degrees Centigrade,20%-90% without condensation.
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check StockLoulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-400V AC Output 0-5V DC
- Working Stability: annual change 003c 0.2%.
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Load Capacity: 2 times current continuous.
- Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check StockHiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V
- Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission..
- The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode..
- It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands..
- AT command interface with "auto baud" detection..
- TTL serial port for serial port, you can link directly to the microcontroller.
Check StockLoulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-150V AC Output 4-20mA DC
- Working Stability: annual change 003c 0.2%.
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Load Capacity: 2 times current continuous.
- Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check Stock16mA Logarithmic Amplifier Module 100 DB Amplifier Board 5MHZ‑500MHZ SMA Detector Module for FSK PSK Demodulation Signal Reception
- Logarithmic Amplifier Module: Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
- RSSI Linearity: ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
- Apply to: Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
- Specific Parameters: 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain. Dynamic Range: 100 dB -78 dBm to +22 dBm (Re 50 O). Total Gain: 100 dB. Bandwidth: 500 MHz. Sleep Current: 003c1mA..
- Founction: AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation. Input and Output Interface: SMA Female..
Check Stock