GIGABYTE GA-970A-D3 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard
- CPU: Support for AMD AM3+ FX. AM3 Phenom II. Athlon II processor. Chipset: North Bridge: AMD 970, South Bridge: AMD SB950.
- Memory: 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory. Dual channel memory architecture..
- Audio: Realtek ALC889 codec. High Definition Audio. 2. 4. 5.1. 7.1-channel..
- Expansion Slots: 1 x PCI Express x16 slot, running at x16. 1 x PCI Express x16 slot, running at x4. 3 x PCI Express x1 slots. 2 x PCI slots.
- Storage Interface: 6 x SATA 6Gb. s connectors. Support for RAID 0, RAID 1, RAID5, RAID 10 and JBOD.
- 2 x USB 3.0. 2.0 ports. 1 x RJ-45 port. 6 x audio jacks (Center. Subwoofer Speaker Out..
- Audio: Realtek ALC889 codec. High Definition Audio. 2. 4. 5.1. 7.1-channel. Support for S. PDIF Out..
- Back Panel Connectors:1 x PS. 2 keyboard. mouse port. 1 x optical S. PDIF Out connector. 8 x USB 2.0. 1.1 ports..
- Internal I. O Connectors:1 x 24-pin ATX main power connector. 1 x 8-pin ATX 12V power connector..
Check StockMUSYSIC MU-D16K Professional 2-Channel 2x8000 Watts D-Class 1.5U Power Amplifier
- 2-Channel Professional D-Class Power Amplifier 2x8000 Watts Peak Output.
- Stereo Output Power: "2x8000W PEAK, 2x4000W Program, 2x2000W RMS @ 2Ω" "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @ 4Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @ 8Ω" / Bridge Output Power: "8000W PEAK, 4000W Program, 2000W RMS @ 4Ω" "4000W PEAK, 2000W Program, 1000W RMS @ 8Ω".
- Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) <0.23%20Hz-20KHz / Siew Rate >30V/us / Damping Factor >150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk >80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
- Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 90v-250v 50Hz.
- Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protecti....
Check StockMUSYSIC Professional 2 Channel 7000 Watts DJ PA Power Amplifier Signal out MU-P7K
- Stereo Output Power: "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @2Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @4Ω" "2x1000W PEAK, 2x500W Program, 2x250W RMS @8Ω".
- Bridge Output Power: "4000W PEAK, 2000W Program, 1000W RMS @4Ω" "2000W PEAK, 1000W Program, 500W RMS @8Ω".
- Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) : <0.23%20Hz-20KHz / Siew Rate >30V/us / Damping Factor >150 / Output Circuitry: Class AB / Signai to Noise Ratio ≥96dB / Cross Talk >80dB / lnput Sensitivity(8Ω) 1V /.
- Connectors: Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
- Dual cooling fans / Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit. / lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit. / Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check StockBoss Audio Systems AR1500M Armor 1500 Watt Monoblock Class A/B Car Amplifier with Remote Subwoofer Control and B65N High Level to Low Level Converter
- AMPLIFIER: Max power: 750 watts x 1 channel @ 4 ohms.
- RMS Power: 563 watts x 1 channel @ 4 ohms.
- MONOBLOCK CLASS A/B: Monoblock, Class A/B circuitry, MOSFET power supply.
- BASS BOOST: Variable Low Pass Crossover, Switchable Bass Boost.
- AMPLIFIER SPECIFICATIONS: Remote bass control included.
- Frequency Response: 9 Hz to 50 kHz ±1 dB.
- RCA Input Sensitivity Adjustment Control.
Check StockALPINE S-A32F 320w RMS 4-Channel S-Series Car Audio Amplifier Class D+Amp Kit
- (1) Alpine S-A32F 320 Watt RMS 4-Channel S-Series Car Audio Amplifier Class D Amp. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. Install. Terminal Layout: One side. Small footprint for easy installation. Screw terminals (for speaker and power cables). General. Amplifier Type: Class-D (Digital). Channel Design: 4/3/2 Channel. Thermal Management Control. Top Mounted LED Power/Status Indicator. Speaker Level Input with remote turn on.
- Crossover: Adjustable Low-pass (LPF) / High-pass Filter (HPF). Gain Control: Adjustable. Bass Control: Remote Bass Control (RUX-KNOB2) Ready. Max Power Output Ratings. Total Max Power: 640W. RMS Power Ratings. Per Channel into 2 Ohms, 14.4V (%THD+N): 4 x 80W. Per Channel into 4 Ohms, 14.4V (%THD+N): 4 x 55W. Bridged into 4 Ohms, 14.4V (%THD+N): 2 x 160W. Sound Tuning. Crossover: Variable LPF, 50-400Hz (-12dB/oct ). Crossover: Variable HPF, 50-400Hz (-12dB/oct ). General.
- Power Requirements: 14.4 V.DC (9 - 16 V allowable). Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V. High Level Input with automatic power on. Cable size: Power Cable AWG 8, SPK Cable AWG 10. Frequency Response (+0, -....
Check StockMUSYSIC Professional 2 Channel 9000 Watts DJ PA Power Amplifier Signal out MU-P9K
- Stereo Output Power: "2x5600W PEAK, 2x2800W Program, 2x1400W RMS @ 2Ω" "2x2800W PEAK, 2x1400W Program, 2x700W RMS @ 4Ω" "2x1400W PEAK, 2x700W Program, 2x350W RMS @ 8Ω".
- Bridge Output Power: "5600W PEAK, 2800W Program, 1400W RMS @ 4Ω" "2800W PEAK, 1400W Program, 700W RMS @ 8Ω".
- Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) <0.23%20Hz-20KHz / Siew Rate >30V/us / Damping Factor >150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk >80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
- Dual cooling fans / Connectors Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
- Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check StockBlomiky 2 Pack 6V 900mAh AA Battery Pack with JST Plug and USB Charger Cable for New Huina 540 Dump 520 RC Bulldozer and 510 Excavator 540 Battery 2
- Connector plug:Red JST connector, plug end cross-section size:5.55*3.0mm/0.218*0.13inch. Plug red cable pin is positive, black cable pin is negative. make sure your device is same line, don’t be reversed. 6 Channle RC Dump and RC Bulldozer replace battery. Battery fit for 1/18 scale kolegend Remote Control Bulldozer..
- Battery dimensions:L70*W50*H14.5mm/2.8*1.97*0.57 inch. weight:92gram/3.25oz. Remote control Dump and Remote Control bulldozer replace spare parts battery..
- 6V 900mAh Nicd rechargeable battery fit for new version Fisca Fistone Blomiky SGILE KKNY TEMA1985 Huina 540 1540 6 Channel 2.4G RC dump truck 4 Wheel Driver Mine Construction Alloy Metal Vehicle Truck.
- 6V 900mAh Nicd rechargeable battery fit for new version Cradream SGILE Fisca Fistone Blomiky KKNY Huina 520 1520 TopRace 6 Channel Full Functional Front Loader 6 Channel RC Bulldozer. Remote control dump bulldozer battery..
- 6V 900mAh Nicd rechargeable battery fit for new version Fisca Fistone Remote Control Excavator RC Digger, 2.4Ghz 11 Channel Construction Vehicle Huina 510 1510 11 Channel RC Excavator Truck..
Check StockMUSYSIC MU-D9600 Professional 4-Channels 2x9600 Watts D-Class 1U Power Amplifier
- 4-Channels Professional D-Class Power Amplifier 2x9600 Watts Peak Output.
- Stereo Output Power: "4x4800W PEAK, 4x2400W Program, 4x1200W RMS @ 2Ω" "4x2400W PEAK, 4x1200W Program, 4x600W RMS @ 4Ω" "4x1200W PEAK, 4x600W Program, 4x300W RMS @ 8Ω" / Bridge Output Power: "2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 4Ω" "2x2400W PEAK, 2x1200W Program, 2x600W RMS @ 8Ω".
- Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) <0.23%20Hz-20KHz / Siew Rate >30V/us / Damping Factor >150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk >80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
- Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 115v-230v 50/60 hz.
- Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio fre....
Check StockRockville RDJ3BT 2 Channel DJ Mixer with USB, Bluetooth, Talkover, 4 Line Inputs
- Rockville RDJ3BT compact 2 channel DJ mixer with USB, Bluetooth, and LED display..
- Selectable Inputs for channel 1 and channel 2. 2 Channels..
- Adjustable high, low, and gain knobs on each channel. Mic volume control..
- Equalizer: Bass + 12dB 60Hz / Treble + 12dB 10KHz..
- Channel 1/2 Cue monitor control. Individual volume control..
- Master volume control. Channel 1 and 2 fader and cross fader..
- Built in USB and MP3 player with LCD to play back tracks. Built in Bluetooth for hands free music playback..
- Talk-over: -16dB. Distortion: ≤ 0.05%. Signal/ Noise ratio: 003e 80dB. 1 1/4" Mic input. 1 1/4" Headphone output..
- 4 RCA L/R Line inputs. 1 RCA L/R Master amp output. 1 RCA L/R Rec output..
- You can ground your turntables to the mixer. Dimension: 7 x 8.85 x 2.4 inches. Weight: 3.08 lbs..
Check StockH61M Motherboard, 1155 Pin DDR3 Dual Channel Quad Core VGA HDMI Stable Power Computer Motherboard High Compatibility for Core I7 / I5 / I3 /Pentium/Celeron LGA1155
- 【M-ATX Motherboard】- B75 M.2 motherboard supports M.2 high speed hard disk interface, round keyboard (PS/2 port). Gigabit Ethernet high quality 6 channel sound card, high speed and stable transmission..
- 【Graphics Card】- High definition high performance core display graphics card, support VGA+HDMI+DVI dual output High compatibility brings a higher experience.
- 【Expansion Slot】- Supported: 1 x PCI-EX16 graphics slot, 1 x PCI-EX1 slot, 1 x M.2 interface with NVME/SATA mode conversion jumper, 2 x USB2.0 pin, 1 x USB3.0 pin, 3 x SATA2.0 interface, 1xSATA3.0 interface..
- 【Feature】- Support front and rear dual USB 3.0 ports, support SATA3.0 hard disk transfer rate. Support NVME+NGFF dual mode hard disk switching PCIE high speed channel + SATA2.0 channel free choice. M.2 high speed hard disk interface, maximum memory support 8G×2, 1155 pin CPU interface USB3.0 SATA3 support DDR3..
- 【Satisfaction Service】- If you have any problems while using this product, please feel free to contact us immediately by email, we will serve you as soon as possible. For any questions related to product quality, we will exchange or refund for you in full, thank you for choosing us, thank you..
Check StockPUSOKEI Desktop Motherboard, LGA 1155 DDR3 Computer Desktop Mainboard for Intel B75, 3 x SATA2.0 Interface, Support VGA+HDMI+DVI Dual Output
- [B75 Motherboard]Gigabit Ethernet high-quality 6-channel sound card, high-speed and stable transmission. B75 M.2 motherboard supports M.2 high‑speed hard disk interface, round keyboard (PS/2 port). Support front and rear dual USB 3.0 ports, support SATA3.0 hard disk transfer rate.
- [Expansion Slot]1 x PCI-EX16 graphics slot, 1 x PCI-EX1 slot, 1 x M.2 interface with NVME/SATA mode conversion jumper, 2 x USB2.0 pin, 1 x USB3.0 pin, 3 x SATA2.0 interface, 1xSATA3.0 interface..
- [Graphics Card]High-definition high-performance core display graphics card, support VGA+HDMI+DVI dual output High compatibility brings a higher experience..
- [NVME+NGFF]Support NVME+NGFF dual-mode hard disk switching PCIE high-speed channel + SATA2.0 channel free choice..
- [Note]Need to install batteries for the motherboard to work. If you are not satisfied, and we'll refund or replace your quill pen set. We go out of our way to make sure every customer satisfied with our product and service..
Check StockHifonics Zeus ZXX3200.1D 3200W Class D Monoblock Car Amplifier w/Amp Kit
- Package: Hifonics ZXX3200. 1D + 0 Gauge Amp Kit.
- ZXX3200. 1D: 3200W Zeus Series Class-D Monoblock 1-Ohm Stable Amplifier.
- Max Power Rating: 1 ohms: 3200 watts x 1 channel / 2 ohms: 1600 watts x 1 channel / 4 ohms: 800 watts x 1 channel.
- Variable low-pass filter: 40 - 300 Hz, 12 dB/octave / Subsonic filter: 10 - 40 Hz , 12 dB/octave / Variable Bass Boost: 0 to +12 dB bass boost at 50....
- Frequency Response: 40 - 300 Hz / Signal to Noise Ratio: >95 dB / Fuse Rating: 70A x 2.
Check StockHifonics Zeus ZXX-2400.1D 2400W Class D Monoblock Car Amplifier w/Amp Kit
- Package: Hifonics ZXX2400. 1D + 0 Gauge Amp Kit.
- ZXX2400. 1D: 2400W Peak Zeus Series Class-D Monoblock 1-Ohm Stable Amplifier.
- Max Power Rating: 1 ohm: 2400 watts x 1 channel / 2 ohms: 1200 watts x 1 channel / 4 ohms: 650 watts x 1 channel.
- Variable low-pass filter: 40 - 300 Hz, 12 dB/octave / Subsonic filter: 10 - 40 Hz , 12 dB/octave / Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz.
- Frequency Response: 40 - 300 Hz / Signal to Noise Ratio: >95 dB / Fuse Rating: 70A x 2.
Check Stock