Categories

Best 2 4 Tft lcd Screen

BIGTREETECH TFT35 V3.0 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR V1.3 SKR PRO Board for 3D Printer Part

  • ❤【32 Bit High Performance Microprocessor】TFT35 V3.0 touch screen uses 32 bit ARM level Cortex-M3 series STM32F207VCT6,120MHz frequency....
  • ❤【Two Working Modes】TFT35 V3.0 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode....
  • ❤【12864LCD Mode】The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is....
  • ❤【More Extension Ports is Reserved】 TFT35 V3.0 display reserve the extension port of filament break detection ,automatic shutdown after....
  • ❤【Firmware Update】 It is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must....
Check Stock

LCD Touch Panels Touchpanel Analog for DOGM128-6 (EA TOUCH128-1)

  • Easy to Program - Includes complimentary GUI Software that makes programming fast and easy for engineers. This can reduce your project's time and expense. The LCD touch screen can easily create an intuitive touch interface by adding png/jpg/bmp/svg/gif image files as your background and defining functions by components. It's easy even for beginners..
  • Lots of Powerful Upgrades - New Launch Intelligent Series 7.0" TFT LCD monitor can be controlled by any MCU. This offers 1 G Hz Cortex A8 CPU driving device and 256 Flash memory for HMI projects. You also get RS232/TTL UART Interface and USB port. The module is compatible with 7/28V wide operation voltage. (This is an excellent choice for your Arduino and Raspberry Pi projects.).
  • Clear, Detailed, Hi Res HD - Our Smart HMI TFT LCD display offers excellent 800x480 high resolution with 4-wire resistance touch screen. Rich 262K (18bit) color for high color restore. Rectangular ratio 16:9 display format conversion. 70°/70°/50°/70° wide viewing angle, adjustable brightness（300 cd/m²) , TTF Font and contrast (500:1) offers you the ultimate project experience to accomplish more with improved results..
  • Ultimate TFT LCD Display Module for Industry - SCBRHMI Intelligent TFT-LCD Module Model STWI070WT-01 is....
Check Stock

5’’ Inch TFT LCD Car Color Rear View Monitor Screen for Parking Rear View Backup Camera with 2 Optional Bracket(Suckers Mount and Normal Adhesive Stand), Camera not Included, Monitor Only

  • 5” Inch Digital TFT LCD Color Monitor Screen for Car Rear View Parking Backup Camera, Camera not included, Monitor Only.
  • Anti-glare High Resolution,800(RGB)X480, 5-inch TFT LCD screen with excellent color.
  • Working perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment.
  • Perfect companion product for a Chuanganzhuo’s backup camera,Automatically starts when the car back up, video opened at the same time.
  • Package content:1 x 5″ TFT LCD Monitor.
Check Stock

Ferwooh Nextion 3.5'' Display NX4832T035 Resistive Touch Screen HMI TFT Smart Module LCD for Arduino Raspberry Pi ESP8266

  • The 3.2 tft lcd expansion board is compatible with arduino mega 2560.
  • With tft lcd shield, you can use 3.2 touch screen with mega more conveniently.
  • This 3.2" lcd shield is NOT compatible with all 3.2" tft lcd. Please chheck it carefully..
  • You can buy 3.2" tft lcd for the shield by "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

Screen Replacement for Samsung Galaxy J7 2016 J710 J710F J710M/H TFT LCD Touch Screen Digitizer Glass Assembly Not Original AMOLED Gold

  • Note pls:This is TFT LCD Display compatible for original AMOLED screen, this LCD is not original, but can compatible For Samsung Galaxy J7 2016....
  • [Strictly quality control]All the screens are 100% tested with original machine before shipping, make sure no scratch and dead area in LCD. Pls....
  • [LCD Screen Replacement For Samsung Galaxy J7 2016 ] This screen replacement For Samsung Galaxy J7 2016 LCD Screen is Not Original AMOLED, it's TFT....
  • [Package Contains]1 X LCD Screen Assembly ,1 X Glue Tape,1 X Repair Tools,1x opening card, 1x tempered glass film, more easy for installing with tools....
  • [After-sale Service]we guarantee 6 months for our products,if there are any non-human factor quality problem,please contact us in 12 months! we....
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

Archos 28 4 GB Internet Tablet (Black)

  • 4 GB capacity for about 4,000 songs, 80,000 photos, or seven full-length movies with 2.8 Inch TFT LCD display.
  • Enjoy about 16 hours of audio, 4 hours of video, or 6 hours Web browsing on a single charge.
  • 2.8-inch, 16-million-color TFT touchscreen LCD with QVGA 320 x 240 pixel resolution.
  • Support for MP3, WMA, WAV, AAC, OGG Vorbis, FLAC, and AC3 audio formats.
  • MPEG-4, H.264, WMV/VC1, Motion JPEG, and MPEG-2 video codecs.
Check Stock

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3 with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

Valkyria Chronicles Remastered: Full Avatar Pack - PS4 [Digital Code]

  • 1. Energy-saving design using - power chip..
  • 3. Add P1 P2 label, add 3MP1 jumper point..
  • 4. PCB with higher quality than V1 and V2..
  • 5. 3.5-inch a-Si TFT LCD screen with a resolution of 320 * 240, point-to-point full-screen display, high refresh rate, and bright colors.
Check Stock

Men's Casio Edifice Super Slim Stainless Steel Chronograph Smartphone Link Watch EQB1000XD-1A

  • ...comm Snapdragon S4 Plus de doble núcleo de 1,5 GHz con 1 GB de RAM 16 GB de memoria interna.
  • Sin contrato Verizon teléfono celular listo para activar en Verizon Wireless.
  • Here is the easy way to fix some of the simple problem. Restore the phone first to see if this help. 1. Ensure the device is powered off. Note If screen is frozen, remove/reinsert battery. 2. Press the Power button (located on the top right edge) to power the device on. 3. When Now Loading displays on the device, press and hold the Power button (located on the top-right edge), the Volume Up button (located on the left edge near the top) and the Menu icon Menu icon (located on bottom-right) for 20-30 seconds. Note Device vibrates several times. 4. Release all buttons once the Android system recovery screen appears.. 5. When prompted with "Permanently Erase User Data and Reset Settings?", select "yes --- delete all user data." Note Utilize the Volume buttons to highlight and the Power button to select. 6. When prompted with "Are you sure you want to continue with erase?", select "Yes -- delete all user data". Note Allow several minutes for the factory data reset and reboot processes to complete..
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock