Categories

Best 2 5 Enclosure

Powerwerx MBLCOVR Mobile Radio Base Station Enclosure with Power Adapter

  • The MBLCOVR is a radio cover enclosure that mounts to the Powerwerx SS-30DV power supply when using a AT-D578UV or DB-750X radio in a base station configuration..
  • This kit includes the power supply cover, short DC power supply connecting adapter cable and handle..
  • Our base station enclosure can accept radios smaller than 5.5" wide and 2.125" tall. The enclosure is compatible with most radios having 5.5" (140mm) mount spacing..
  • Enclosure Outter Dimensions (W x D x H): 5.75" W x 6.00" D x 4.40" H (6" height with handle).
Check Stock

ORICO 5 Bay Raid Hard Drive Enclosure Magnetic Aluminum USB 3.0 to SATA for 3.5 inch HDD Tool Free Storage Case Support 7 RAID Modes Up to 80TB(5X16TB) - NS500RU3

  • 7 RAID MODES -- The ORICO 5 bay raid enclosure equipped with raid function for the various uses. The 5 bay external hard drive enclosure can support raid 0/1/3/5/10/JBOD/Clone and normal raid to allow users to adjust and set up by dialing combination according to your needs..
  • LARGE CAPACITY -- Every single disk of the 3.5 usb raid enclosure can reach up to 16TB, altogether 80TB larger capacity for the enterprises big data backup and storage, also a good choice for nas expansion. The 3.5inch sata enclosure can support 3.5inch HDD and 2.5inch SSD/HDD with a bracket..
  • QUALITY CHIP CONTROL -- The 5 bay usb enclosure adopts three high quality chips, which has both transmission performance for fast 5Gbps and stability and can carry the huge data interaction of the enterprise, reduce the delay..
  • GOOD HEAT DISSIPATION PERFORMANCE -- A 92mm cooling fan built in the usb drive enclosure with honeycomb dissipation holes at the back of the 3.5 hdd enclosure, and the aluminum alloy material made the whole 5 bay external raid enclosure can helps to accelerate the flowing wind and heat dissiapation for prolong the service life of the hard ....
Check Stock

ORICO 5 Bay Hard Drive Enclosure Raid USB3.0 to SATA Aluminum 3.5 External HDD/SSD Storage Drive Enclosure Data Safe Protection for Enterprise Backup Up to 80TB 5x16 -WS500RU3

  • [80TB Larger Capacity] - WS series drive bay enclosure can support all 3.5inch sata hard disks under less than or equal to 16TB HDD, altogether 80TB large capacity for hard drive expansion, maximize to meet your data storage and backup demand. The 3.5inch drive enclosure also a good choice for nas expansion or the data protector in big enterprise.
  • [Great Heat Dissipation Performance] - Designed with a built-in cooling fan and honeycomb heat dissipation holes on the front and back cover of the 5 bay usb external hard drive enclosure, made by all aluminum alloy enclosure and allows the heat generated in the use to be accelerated by the flowing wind for the great ventilation performance.
  • [Support RAID Mode] - The 5 bay external hard drive raid enclosure support RAID 0/1/3/5/10/JBOD/ClONE/Normal RAID Mode which can meets different work requirements, and enlarge the ways of working habits. With back cover RAID Set and built-in RAID software management, you can choose the way you convenient. Please operation follow the page description and user manual of the 5 raid bay enclosure.
  • [Transfer Speed up to 5Gbps] - This 4 bay hard drive enclosure supports all 3.5" SATA (I / II / III) hard disks, USB3.0 to SATA3.0 dual high-speed transmission that the speed up to 5....
Check Stock

StarTech.com eSATAp/eSATA External Hard Drive Enclosure - 2.5' SATA III Hard Drive Enclosure - Portable HDD/SDD w/ UASP (S251SMU33EP)

  • VERSATILE FUNCTIONALITY: The USB 3.0/eSATAp drive enclosure turns a 2.5in SATA HDD or SSD into an external portable hard drive that can connect to any USB or eSATA-enabled computer system..
  • ENHANCED WITH UASP: The 2.5" SATA hard drive enclosure has support for UASP, which delivers performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller..
  • FASTER SPEEDS: The external hard drive enclosure supports SATA III, hybrid drives and SSD, saving you time by ensuring you're getting the most out of your drive performance..
  • MAXIMUM COMPATIBILITY: The USB 3.0 hard drive enclosure supports all of the leading operating systems, including: Microsoft Windows, Apple OSX, Linux, and Google Chrome OS..
  • Turn a 2.5” SATA III HDD / SSD into an external hard drive that can connect to your computer through either eSATAp at 6 Gbps or USB 3.0 with UASP at 5 Gbps.
  • Compatible with USB 3.0 & eSATA/eSATAp computer systems and 2.5in hard drives (HDD) and solid state drives (SSD).
  • USB 3.0 Hard Drive Enclosure / USB 3.0 External Hard Drive Enclosure / eSATA Hard Drive Enclosure / USB 3.0 SATA Enclosure.
  • Take advantage of laptops and desktops that feature eSATA connectivity.
Check Stock

Parts Express Cast Frame #10-32 Speaker Mounting Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound....
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16....
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
Check Stock

Kicker 43CVR152 COMPVR 15" 1000W Car Subwoofer+Vented Box+Mono Amplifier+Amp Kit

  • Package Includes: (1) Kicker 15" Car Audio Subwoofer. (1) RockvilIe Single 15" Vented Car Sub Enclosure Box 3.51 Cu Ft. (1) RockvilIe RXD-M1 500 Watt CEA Compliant Rating Mono Class D Car Amplifier. (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's. 10 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. Features/Specifications:.
  • Kicker 43CVR152 15" 1000 Watt Dual Voice Coil 2-Ohm Car Audio Subwoofer. Power Handling: Peak :1000 watts. RMS :500 watts. Size :15". Injection molded SoloKon cone. Ribbed Santoprene Surround. Perimeter Venting. Spiralead tinsel-lead technology. UniPlate system redirects heat away from motor structure. Stamped Steel Basket. Spring-loaded Push Terminals. Dual 2-Ohm high-temperature voice coils. Top-mount depth : 8-3/16". Mounting Diameter : 13-11/16". Sensitivity : 89.2dB @ 1w/1m.
  • Frequency Response : 25-500Hz. Minimum Sealed Enclosure : 1.8 cu. ft. Maximum Sealed Enclosure : 5.2 cu. ft. Minimum Ported Enclosure : 3 cu. ft. Maximum Ported Enclosure : 5 cu. ft. Subwoofer Design : Round / Circle. Main Cone Color : Dark Gray. Woofer Composition : SoloKn. Woofer Surround : Santoprene Rubber. Weather....
Check Stock

MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box Mono Block Amplifier and 8 Gauge Amplifier Amp Complete Wiring Installation Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

Memphis Audio MJP1544 15' 1500 Watt MOJO Car Subwoofer+Vented Sub Box Enclosure

  • Package Includes: (1) Memphis Audio MJP1544 15″ 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub. (1) Rockville RBS15 Big Single 15″ SPL Side Vented Car Sub Enclosure Box 4.4 Cu Ft. (1) Complete Single Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spades.
  • Specifically designed for high SPL performance. DVVC Direct Vent Voice Coil Cooling. Cross drilled front plate venting. Aluminum shorting ring for reduced inductance. Foam surround. Rigid paper cone. Progressive spider. Diecast basket. Single Sided compression terminals. Size: 15 Inch. Voice coil: DUAL 4Ω. RMS/PEAK: 750/1500 Watts. SENS: 88 dB. DEPTH: 7.88 Inch. CUT OUT: 13.84 Inch. Thiele Small Parameters: Resonant Frequency (fs): 31.2 Hz. Mechanical Q (Qms): 6.558. Electrical Q (Qes): 0.727. Total Q (Qts): 0.65. Sensitivity: 88 dB. Xmax Linear: 0.51 in. Displacement: 0.29 cf. Air Volume of Suspension (Vas): 2.93 cf. Moving Mass (Mms): 305.92 g. Suspension Compliance (Cms): 0.085 mmN.
  • Effective Piston area (Sd): 829.58 SqCm. Motor Strength (Bl): 12 TM. DC Resistance: 1.75 Ohms. Voice Coil & Magnet: Impedance Series: 8 ohms. Impedance Parallel: 2 ohms. Voice Coil Diameter: 2.5 in. RMS Power: 750 watts. Peak Power: 1500 watts. Magnet Weight: 120 oz. Magnet Diameter: 6.69 in. Physic....
Check Stock

MTX TNP212D2 12' 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 1....
Check Stock

Yottamaster Aluminum Alloy 3.5 USB3.0 2 Bay External Hard Drive Enclosure for 3.5 Inch SATA HDD Support 2 x 10TB & UASP -Silver,Mac Style Designed for Personal Storage at Home&Office- [PS200U3]

  • 【Reliable External Storage System for Individuals】This 2 bay hdd enclosure support up to 20TB external expanded storage. The front door adopt....
  • 【6Gbps Transfer Rate】This dual bay hdd enclosure adopt SATA III protocol, transfer rate up to 6Gbps (MAX). Equipped with a versatile USB3.0 Type-B....
  • 【For 2,5/3,5-inch Hard Drives】It comes with two removeable trays, allowing for easy installation and replacement of either the large desktop hard....
  • 【20TB Storage Capacity 】The dual bay hard drive enclosure can house up to 2 hard drives, single disk support up to 10TB. It supported to let you....
  • 【What you will get】 1x 2 bay USB3.0 hard drive enclosure.
Check Stock

Kapitel 12

  • SDR Series 12-inch Dual 4-ohm loaded Subwoofer Enclosure.
  • Peak Power: 2,400 Watts | RMS power: 1,200 Watts.
  • Pre-wired Internally for a 1 Ohm Final Impedance Load at the Terminals for an Easy Installation.
  • Custom Vented Enclosure Made of High Strength 5/8" MDF and Finished in Premium Black Carpeting.
  • Double Front Baffle (1.25") with Countersunk subwoofer design for Flush and Attractive Appearance.
  • Ported Enclosure Tuned at 32 Hz for Deep and Accurate Bass.
Check Stock

ORICO 5 Bay External Hard Drive Enclosure Magnetic Aluminum Type-C to SATA for 3.5inch HDD Tool Free Storage Case for Enterprise Data Backup and Expansion Up to 80TB(5X16TB) - NS500U3

  • LARGE CAPACITY -- Every single disk of the 3.5 usb c enclosure can reach up to 16TB, altogether 80TB larger capacity for the enterprises big data backup and storage, also a good choice for nas expansion. The 3.5inch sata enclosure can support 3.5inch HDD and 2.5inch SSD/HDD with a bracket..
  • Tool-Free Installation -- The construction of the 5 bay drive enclosure is magnetics design with 8 magntic chips on the cover, you can just spend 3 seconds to complete drive installation and prolong the service life of the cover, easy your working way and save your time..
  • DUAL CHIP CONTROL -- The 5 bay hdd enclosure adopts high-end chips, which has both transmission performance for fast 5Gbps and stability and can carry the huge data interaction of the enterprise, reduce the delay..
  • GOOD HEAT DISSIPATION PERFORMANCE -- The 92mm cooling fans built in the usb drive enclosure with honeycomb dissipation holes at the back of the 3.5 hdd enclosure, and the aluminum alloy material made the whole 5 bay external enclosure can helps to accelerate the flowing wind and heat dissiapation for prolong the service life of the hard drive..
Check Stock

Rockville DV12K52 Dual 12" K5 2800w Car Subwoofers+Vented Sub Enclosure Box/2Ohm

  • Features: Rockville DV12K52 Dual 12" K5 2800w Car Subwoofers Pre-loaded In Vented Sub Enclosure, Final Impedance: 2 Ohm, Peak Power Handling: 2800 Watts, CEA-2031 Compliant RMS Power Handling: 700 Watts, ¾” MDF enclosure.
  • Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire.
  • Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion, Blue Stitching Cone Reinforcement Ensures Long Life, Polypropylene Dustcap, Gold-Plated spring loaded push terminals, Vented Hole on T-yoke Enhances Heat Dissipation.
  • Cutout Diameter: 11.02” inches, Mounting Depth: 5.03” inches, Frequency Response: 25 Hz - 1.5K kHz, 6mm T-Yoke + 6mm Washer, Sensitivity: 88dB, Weight: 62.7 Lbs., Dimensions of enclosure: 32.5“x 17.25" x16.25".
  • Detailed Info: Body: Non-Pressed Paper, Gap Plate Inside Diameter: 80mm (3.14 inches), Gap Plate Outside Diameter: 156mm (6.14 inches), Gap Plate Thickness: 25....
Check Stock