Categories

Best 2 5 Inch Exhaust Clamp

Roadformer 5" Butt Joint Exhaust Clamp - Aluminized Steel for 5 inch OD exhaust pipes, muffler ends and exhaust system connection with leakage free (2 Pack)

  • 2 PIECES IN PACKAGE – 5 inch butt joint exhaust clamp is made in high quality Aluminized Steel, it is used for 5 inch OD pipes & muffler ends connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, New design provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 560 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

  • Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Q1-TECH, Universal 4' Burnt Tip JDM N1 Style Muffler Hi Flow Stainless Steel Weld-On 2.5' Inlet , Muffler , Removable Silencer Pre-attached , Deep and Smooth tone

  • ✅Fitment: Universal fit for all 2.5 inch exhaust pipe, as long as your exhaust pipe is 2.5 inch ,it would fit . and easy to install, bolts on in minutes. You can choose Butt joint, Lap joint, or muffler seal clamp ,U bolt clamp..
  • ✅Feature: Polished stainless steel, The muffler is 2.5 inch inlet, 4 inch outlet, 19 inch length just need to measure the inlet of your car before purchase..
  • ✅Straight-through muffler design reduces back pressure while absorbing sound waves Made from the stainless steel for long-lasting durability..
  • ✅Function: A muffler is used near the end of the exhaust system on a vehicle, work on the principle of destructive interference and absorption. The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound..
  • ✅Package includes: 1 x Exhaust Muffler, Includes removable silencer OUTLET TIP 4", INLET TIP 2.5".
Check Stock

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • ...5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
  • The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

  • ...ade of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
  • The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

Roadformer 2.5 Butt Joint Exhaust Band Clamp - Aluminized Steel for 2.5 OD Exhaust Pipe Muffler Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 2.5" butt joint exhaust clamp is made in high quality standard, this band clamp is used for 2.5" OD to 2.5" OD exhaust....
  • REAL SEALING CAPABILITY - Roadformer 2.5" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached....
  • DURALITY & RELIABILITY - exhaust clamp band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior....
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and....
Check Stock

Roadformer 5" Exhaust Clamp Narrow Band Stainless Steel (2 Pack)

  • This 5" exhaust clamp is made in Stainless Steel. Used to joint 5 inch OD pipe slip fit into ID pipe for connection. Two pieces included in a single pack.
  • Pre-attached hardware for fast, easy and accurate installation, Roadformer Clamp technology provides simple, effective way to maintain and repair your exhaust system.
  • Grade 10.9 bolts provided superior capability of clamping and sealing. This narrow band clamp does create over a ton of clamping force without crushing pipes, resulting in strong and serviceable joint. The working torque is in the range of 40-50 ft-lbs.
  • Our innovation Reaction Block Technology provides a full 360-degree equal distribution of stretching force, prohibiting pipe distortion, durable installation without damage to pipe ends.
  • Roadformer Clamps set industry standard in premium quality and affordable price. Roadformer private labeled products do means Quality, Trust and Responsibility.
Check Stock