Categories

Best 2 54mm Pin Header

risingsaplings Rpi Pi GPIO Breakout Board 3 Types Output Terminal Block Module for Raspberry Pi 2 3 4 Zero

  • The module has been soldered and assembled. Support for Raspberry Pi 2 3 4 Zero..
  • 3 Type Output: Male Pin Header, Female Pin Header and Terminal Blocks..
  • With 4pcs double-screw bolts and 8pcs screws. (Noted: the module not included Raspberry Pi Board)..
Check Stock

Miuzei PCB Board Prototype Kit for Electronic Projects Circuit Solder Double-Side Board with 40 Pin 2.54 mm Male to Female Headers Connector 2P&3P Screw Terminal Block Solder Flux Solder Wire

  • ⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB....
  • ⭐【Convenient for Projects】The upgrate 0.8mm....
  • ⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header.
  • ⭐【Screw Terminal Block】8 Pcs Screw Terminal Block: 6 pcs 5.08-301-2P and 6 pcs 5.08-301-3P.
  • Pitch: 5.08mm, Rated Voltage: 300V, Rated Current:....
  • ⭐【High Quality & Warranty】Durable Glass Fiber-FR4 Material (Thickness 1.6mm) is A Very Solid and Durable Prototype Circuit Board.
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...egister (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

QLOUNI Crimping Tools Kit, Dupont Ratcheting Crimper Plier Set with 1094 Pcs 2.54mm Dupont Connectors and 460 Pcs 2.54mm JST-XH Connectors - Male Female Crimp Pins Adaptor Assortment Kit

  • [What You Get] In this crimping tool kit, it include a ratchet crimping tool designed for insulated and non-insulated 0.25-1mm cord pin end terminals,1094 PCS 2.54mm dupont connectors, 460 PCS 2.54mm JST-XH connectors and 5m 10-wire ribbon cable. You can choose what you need for your work..
  • [1094PCS Dupont connectors and 460PCS JST-XH connectors] 1094Pcs 2.54mm Pitch JST SM 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10pin terminals, 18-26 AWG wire assortment kit. 460Pcs 2.54mm JST-XHP 2 / 3 / 4 / 5 / 6 Pin Housing with 2.54mm JST XH Male/Female Pin Header..
  • [Easy to Use] There is a ratcheting mechanism design for this insulated terminals crimping tool, one-hand operation could make a perfect crimp without too much effort. The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp..
  • [High Quality Material] This wire crimper is made of premium industrial grade high strength chrome vanadium steel which is treated with black oxidation, rust and corrosion resistance, strong and durable for long time use. Handle is made of soft rubber..
  • [Widely Application] widely used for speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers, electronic toys, batteries, circuit boards..
Check Stock

MILL MAX 310-93-164-41-001000 SIP SOCKET, 64POS, THROUGH HOLE (5 pieces)

  • Total Size : 102 x 11 x 5mm/ 4.1" x 0.43" x 0.2"( L*W*H).
  • Package Content : 20Pcs x Straight Pin Headers.
Check Stock

WayPonDEV NanoPi NEO Core Open Source Quad-core Cortex-A7 1.2GHz Allwinner H3 Single Board Computer Onboard DDR3 512MB RAM & 8GB eMMC Run Ubuntu Core and Armbian System (with Pin Header)

  • [CPU Performance]The NanoPi NEO Core is equipped with Allwinner H3 board ,it is Quad-core(Cortex-A76x4) CPU with a main frequency of up to 1.2GHz.
  • FriendlyCore 16.04(based on UbuntuCore-16.04).
  • FriendlyCore Focal (Base on Ubuntu 20.04).
  • [Pin-header] GPIO: two 2.54mm spacing 12x2pin header,one 2.54mm spacing 10x2pin header.
  • It includes UART, SPI, I2C, USB, I2S, Ethernet, GPIO etc..
  • [Connectivity] Ethernet: 10/100M Ethernet.
  • [Wiki] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO_Core. Any after-sales problems, please contact us by our tech-support click "WayPonDEV" store or leave the message in our forum by "forum.youyeetoo .com/" and ask the question..
Check Stock

60 Pieces Breakaway Pin Header, 40 Pin 2.54mm Straight Single Row Male Pin Header Connector for Arduino Prototype Shield

  • Break Away Headers: Pcb pin head is a straight single row connector, the size of pin pitch is 2.54mm/0.1 inch and there are totally 40 number of pins on each..
  • Easy to Cut: Our male pin header connectors can be cut to different lengths according to your needs, easy to break off and solder on..
  • Electric Component: The pcb pin strip plays the function of bridge in the circuit, and takes up the task of current or signal transmission. It is one of the indispensable components of PCB board and circuit board..
  • Wide Application: Straight single row male pin header is widely applied in the computer and breadboard, suit for Arduino, Raspberry pi and other electronic projects..
  • What You Get: Comes with 60pcs male header connecter strips, sufficient quantity to meet your different needs..
Check Stock

iFlight Mirco BEC 5V 3A / 12V 2A Output Adjustable Step-Down Voltage Regulator 2-6S for FPV Quad Drone Built 3pcs

  • ★ Product Type: High quality male and female housing and 2.54mm female pin header connector compatible with jst-xh connector Kit..
  • ★ Temperature Range: -25 Degree Celsius to 85 Degree Celsius(including temperature rise in applying electrical current)..
  • ★ Easy to use: This set of connector is easy to install, Just put the crimps in the tool and press them, make the crimp the insulation are all the....
  • ★ Widely Application: widely used for speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers,....
  • ★ Package include: This set include JST-XH 2.54mm Female Pin Connectors 320PCS,2/3/4 Pin male and female housing each 20PCS,5/6 Pin male and female....
Check Stock

MCIGICM 10pcs Male Header Pin 40 Pin Header Strip 2.54 mm for Arduino Connector

  • Total Size : 202 x 10 x 2.5mm/ 7.8" x 0.4" x 0.1"( L*W*H).
  • Package Content : 10Pcs x Straight Black Tin Plated Pin Headers.
Check Stock

E-Simpo 10pcs 2.54mm (0.1") Hole Round Female Header Socket Gold Single Row Arduino PCB Female IC Crystal Socke High Quality (1x40P Hole Female Header)

  • 10pcs Single Row 40 Pin 0.1"(2.54mm) Header Socket Connector.
  • Single Row 40Pin Round Female Pin Header.
  • High Quality, Gold-Plated Contact,better electrical conductivity and low contact resistance. Generally used in circuit boards and other low-voltage circuits..
Check Stock

Antrader 30CM 16-Pin IDC Connector Flat Ribbon Cable with Black 2.54mm FC Dual Row Female to Female Sockets, 6 Pieces

  • Double rows, 8Pin female to 8Pin female header with both end, compatible with 2.54mm spacing pin headers..
  • Total length is 12" (30cm) with 2.54mm Female to Female 16P 2 x 8 sockets..
  • Wire Pitch: 0.05" (1.27 mm) Center Spacing.
  • Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • 6pcs IDC Connector flat Ribbon cable, Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc..
Check Stock

CRJ Mini 2-Pin Male Fan to Standard 3-Pin PC Fan Adapter Cable 2-Pack

  • Sold As A 2-Pack, These Adapter Cables Allow You To Connect Mini 2-Pin Fans To A Standard PC Fan Header.
  • Compatible With Both 3-Pin And 4-Pin Fan Headers On PC Motherboards, Fan Controllers, Fan Power Adapter Cables, Etc..
  • Output: 2-Pin Male Mini Fan Connector (2.54mm Pitch, XH-style).
  • Cable Length (Excluding Connectors): 4"/10cm.
Check Stock

Ultra-Small RPi GPIO Terminal Block Breakout Board Module, for Raspberry Pi

  • The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W..
  • Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper..
  • FR-4 fiber glass PCB, dual copper layers..
  • 2x20 positions header connect to Raspberry Pi board..
  • Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board)..
Check Stock