Categories

Best 2 Flute Spiral Point Taps

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8

  • Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
  • ✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
  • ✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
  • ✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
  • ✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.
Check Stock

Thread Taps Drill, Rust Resistance Spiral Combination Tap Better Chip Removal 7Pcs/Set for Drilling(#1)

  • High Speed Steel: Titanium plating combination drill taps are made of high speed steel, which can ensure sharpness, fast execution and maintain strength and efficiency..
  • Spiral Flute Design: This is a tap drill with a spiral flute design, which has a better chip removal effect..
  • Processing: The tap can process wood, plastic, aluminum, tin alloy, Mg alloy, and the thickness of the workpiece is less than 5mm..
  • Chamfer in One : Combination of hole tapping and chamfering, convenient operation, hand drill, bench drill, and hexagonal chuck tapping machine are optional..
  • Improve Work Efficiency: The drill bit can quickly complete the work, which greatly saves processing steps and time costs, and improves work efficiency..
Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

  • [M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
  • [Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
  • [12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
  • [118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock

Walton 10253 1/4\

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

uxcell M3 M4 M5 M6 M8 Spiral Flute Taps Set Titanium Coated High-speed Steel Machine Thread Metric Screw Taps 5pcs

  • Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material & Coating: High-speed steel taps features high hardness and toughness, good for general purpose applications. Titanium coating is for capability, durability, wear-resistance, and long service life..
  • Applications: Suitable for processing blind holes and sticky materials. Suitable for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

FOITECHY 10Pcs Tap Extractor 3/4 Flute Broken Head Screw Remover Stripped Tap Extractor Set

  • Precise Design. Each faucet extractor is specially designed for fast grasping and easy removal of damaged screw taps..
  • Scenes to Be Used. The faucet extractor is suitable for industrial screw and bolt removal and daily household maintenance work..
  • Product Usage. Faucet extractors are used to remove peeled, rusted, damaged or corroded screws and bolts..
  • Strict Quality Inspection. Each faucet extractor has undergone strict quality testing and is durable..
  • 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
Check Stock

BOSCH BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

uxcell PCB Drill Bits 4mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 4mm / 0.157".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

uxcell PCB Drill Bits 3.5mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 3.5mm / 0.138".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

uxcell PCB Drill Bits 4.45mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 4.45mm / 0.175".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

uxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Milling Tap 5pcs

  • Tap Size: 3/8"-16 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period..
  • 3/4 FLUTE SPECIFICATION---2#: 3 flute, M5.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work..
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily..
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using..
Check Stock