Best 2 Screw Type Chiller

Coldbreak Homebrew 6-11 Gallon Batch Copper Immersion Wort Chiller, Large, 3/8” x 60' Pure Copper, Leak Free Compression Barbs, Tubing and Garden Hose Fitting, USA Made

• No wort clogging and save cost while ensuring high cooling efficiency: Compared to plate chiller, this counterflow wort chiller has a wider wort cooling area, the tube wall is thin enough, don't need to make whirlpool, no clogging, cooling efficiency can be comparable to the 60-plate wort chiller.
• works with the principle of gravity caused by position difference, don't need pump driving, don’t need to buy hose connector fittings separately, which will reduce your wort cooling costs perfectly!.
• Used outside the mash tun and reduce brewing taste damage: Compared to the immersion type, this counterflow wort chiller has much less risk of getting any wild yeast into the pot to damage wort taste since it is used outside the brewing kettle, won't interfere hop additions, don't need to worry about the surface oil occurring, smaller size for easy storage, chills beer fastly since chilling and transfer to the fermenter are done simultaneously, uses less water!.
• Faster and less hassle than making an ice bath for your wort: With this counterflow hot liquid accelerated cooler, no more filling the sink with ice water and having to replace ice several times, no more long waiting hours to get to proper temperature cooling your wort, only several mins to get to ....

BirdRock Home Stainless-Steel Wine Chiller - Elegant Double Wall Bucket - Single Insulated Bottle Holder - Wine or Champagne Cooler for Table - Wine Accessories - Indoor or Outdoor - Silver

• Cork Pops VinOice Chiller and Non-Drip Pourer pours and chills wine from a bottle with no drips thanks to a pouring spout with gravity lid and a soft rubber stopper for a tight seal.
• Wine Chiller and pourer eliminates the need for an ice bucket and the common dripping and mess that results, instead utilizing stainless steel chill rods that screw onto the non-drip pouring spout.
• Pourer unscrews from chill rod for easy cleaning and storing and chill rod is designed to be stored in the freezer ready for its next use.
• Rod measures approximately 7.5 inches long and spout measures approximately 5.5 inches long.
• VinOice is a must have wine accessory for any wine connoisseur. Whether you're craving a crisp glass of Pinot Grigio or cellar temperature Cabernet, this two-in-one pourer and chiller make serving wine at its ideal temperature clever, classy, and undeniably cool..
• Individually fitted in protective packaging.

Aquarium Chillers, Fish Tank Cooling Fan System, Fish Tank External Cooling Fan Fish Tank Fan Cooling Fan Two-speed Speed Regulation

• ★Size: 34*20*30 (cm). Input power: 0.1 (kw). Voltage: 110v 60HZ. Power: 1/10HP. Type: Air-cooled chiller. Cooling capacity: 270W. Refrigerant: R134a..
• ★Beautiful and generous, low noise operation. Although small in size, it holds a large fish tank with low noise..
• ★Built-in fan to cool down rapidly. Rapid heat dissipation capacity, allowing you to save electricity and time, efficient heat dissipation. Raise fish first, and water temperature is the best. The fish tank chiller makes the fish rippling in the cool, rejecting high temperature and heat..
• ★Energy saving and environmental protection. Compressor refrigeration, environmental protection and no emissions. Common for fresh water, aquatic plants and sea water tanks. One chiller for multiple purposes, a good deal..
• ★Purpose: cooling the fish tank, it can be used in general cooling places (beauty equipment, ultrasound, etc.). Scope of application: aquatic plant cultivation, jellyfish cultivation, coral cultivation, crystal cultivation..

YUEWO 26 ft Copper Immersion Wort Chiller Coil Homebrew for Beer Brewing with Vinyl Tubing Garden Hose Fitting

• High Efficient & Easy to Clean - This immersion wort chiller used for cooling beer or malt. The beer wort chiller transfers heat more efficiently and is easy to clean..
• High performance & Quick Cooling - The home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. It has reliable performance and quick wort cooling process. Our wort chillers are up to the task whether it's winter or summer..
• Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source..
• Dimension - 3.94inch x 7.87inch x 13.78inch/10cm x 20cm x 25cm(coil diameter x coil height x inlet height) copper immersion wort chiller, 2 pcs 1.5m/4.92feet vinyl tubing..
• Package List - Package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps..

Dbgogo Counterflow Wort Chiller, 32.8’ Homebrew Stainless Steel Heat Exchanger Hot Liquid Accelerated Cooler for Brewing Kettle Mash Tun

• High Efficient & Easy to Clean - This immersion wort chiller used for cooling beer or malt. The beer wort chiller transfers heat more efficiently and is easy to clean..
• High performance & Quick Cooling - The home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. It has reliable performance and quick wort cooling process. Our wort chillers are up to the task whether it's winter or summer..
• Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source..
• Dimension - 3.94inch x 7.87inch x 13.78inch/10cm x 20cm x 25cm(coil diameter x coil height x inlet height) copper immersion wort chiller, 2 pcs 1.5m/4.92feet vinyl tubing..
• Package List - Package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps..

TableCraft Deviled Egg Chiller Tray

• Deviled Egg Chiller Tray, Polystyrene & Stainless Steel, 17 x 11.75 x 2.25".
• TableCraft's Deviled Egg Chiller Tray features a lid/base combo that can be used to cover and keep fresh during storage or transit while it can also be filled with ice and used as a chiller base to keep your food crisp and cold and ready to serve.
• Durable Polystyrene and Stainless Steel construction is lightweight and easy to clean.

Ferroday 20 Plate Wort Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 NPT Thread Plate Chiller (7.5\ x 1.97\)

• [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
• [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 20 brazed plates and cools wort within minutes rather than several hours..
• [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
• [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
• [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....

Frostte CO2 Glass Froster Instant Drink Chiller for Bar Restaurant Kitchen Silver

• Frostte Glass Chiller – CO2 Glass Froster for Cups and Glasses – Instant Drink Chiller for Cocktail, Beer, Mixed Drinks, Wine – Glass Chiller for Bar, Restaurant, Kitchen.
• Instant Led Light Glass Chiller-Portable CO2 Glass Froster.
• APPLICATIONS FOR GLASS COOLER: Wine shops liquor stores ect, Club, Bar Glass Chiller, Restaurant, Office, Home, Parties, Events, etc. where a glass chiller is needed, and of course you can also use it at home or for parties, the LED blue light when mixed with the mist generated by the dry ice..
• WHAT IS IN THE PACKAGE: 1x Glass Chiller and 1x Semisphere 1x Rubber Sealing Rings 1x User Manual (CO2 Tank not included).

FERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller - 7.3' x 2.8'

• [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
• [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours..
• [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
• [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
• [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....

PIOJNYEN 6 Fans Aquarium Fish Tank Cooling Fan, Aquarium Chillers Cooling Fan Fish Tank Fan Cool Chiller Strong Wind Adjustable Aquarium Water Cooling Fan

• TEMPERATURE MEMORY SYSTEM: this fish tank cooling system makes the chiller refrigerate continuously according to the previous temperature when power is supplied to protect the animals and plants. This chiller unit can be used in aquarium, aquaponics, and aquaculture applications to maintain perfect water temperatures for fish to thrive in. Once they achieve the proper temperature, that temperature is maintained with high consistency.
• CHILLERS FOR HYDROPONIC AND AQUARIUM APPLICATIONS: Plant roots require a good flow of oxygen - more oxygen can be held by water when it is at lower temperatures. Using a chiller for hydroponic systems can highly benefit the rapid and healthy growth of plants. Chillers can also be used to combat the high water temperatures associated with aquariums, sometimes due to high-intensity lighting or warmer outside temperatures.
• DURABLE AND QUIET: this hydroponic water chiller has a solid chassis along with overall stylish housing design will ensure that the chiller blends into any working environment. Comes with an anti-corrosive pure titanium evaporator for fresh and salt water use. Pairs with Blue Diamond Pumps HX 99 series water pumps.
• EASY TO USE: the on-board electronic display makes the chiller quick and easy to use and set u....

Coleman Chiller JUG 1 GAL 6001 Ocean C6

Coleman Chiller Series Portable Water Carrier, 5 Gallon Water Jug, Multi-Use

DP 0118-600 Carburetor Float Bowl Drain Screw (Replaces Hex/Allen Head Type Screw) Fits Kawasaki ATV

• NOTE: Some Kawasaki models list 2 different drain screw part numbers. The earlier models use an Hex/Allen Screw type and later models use the Phillips Screw type. If your original drain screw is the Hex/Allen Screw Type, THIS IS the correct screw for your application. If your original drain screw is the Phillips Screw type this is not the correct screw..
• Fits Kawasaki KEF300 A Lakota Utility 95-00, KEF300 B Lakota Sport 01-03, KFX250 KSF250 A Mojave 04, KFX700 KSV700 A/B 04-09, 11 (11 Canada only), KLF300 B Bayou 2×4 92-04, KLF300 C Bayou 4×4 89-05 (05 Canada Only), KLF400 B Bayou 4X4 93-99 (97 Canada only), KRF750 A/B Teryx 4X4 08, KRF750 F Teryx 4X4 NRA Outdoors 08, KSF250 A Mojave 98-03.
• Fits Kawasaki KVF300 B Prairie 2×4 99-02, KVF300 A Prairie 4X4 99-02, KVF360 B Prairie 2×4 03-09, KVF360 A Prairie 4X4 03-13, KVF400 B/D Prairie 2×4 98-02, KVF400 A/C Prairie 4X4 97-02, KVF650 A/B Prairie 4X4 02-03, KVF650 D/E Brute Force 4×4 05-13, KVF650 F Brute Force 4x4i 06-13, KVF700 A/B/D Prairie 4×4 04-06, KVF750 A/B/C Brute Force 4x4i 05-07.
• Contains (1) Carburetor Drain Screw (Replaces Hex/Allen Head Type Screw). Made in Japan of highest quality materials. OEM Fit – Designed and manufactured to work perfectly with ....