Categories

Best 2 pc Shaft Low Torque

BEMONOC Garage Door Motor 12V DC Right Angle Reversible Electric Gear Motor 45 RPM High Torque

  • Dc gear motor Dimensions: 175 * 62mm/ 6.88 * 2.44in(L * D).
  • ✔Out Shaft: 10mm shaft with 2 flats where flat to flat is 8mm and threaded end to fit a M6 tightening nut.
  • ✔Mounting: M6 screw holes, include 3 screws.
  • Main Material: Metal, Electronic component.
  • ✔Notice: the motor duty cycle is 100%, it can run continuously, it's our fault to make a wrong label, hope you can understand, any other questions....
Check Stock

3007715/98001.175x25 Spline Gray

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

TEKTON 1/2 Inch Drive Click Torque Wrench (10-150 ft.-lb.) | 24335 & 3/8 Inch Drive Click Torque Wrench (10-80 ft.-lb.) | 24330

  • Product 1: Includes storage case and product manual with torque conversion chart.
  • Product 1: High-contrast dual-range scale is easy to read, even in low light.
  • Product 1: Reversible ratchet head drives in both directions and measures torque in clockwise direction.
  • Product 1: Durable all-steel construction has no plastic parts to break or wear out.
  • Product 2: Includes: 1-pc. 3/8 in. drive torque wrench.
  • Includes product manual with torque conversion chart.
  • Product 2: Wrench emits a click that can be heard and felt when the preset value is reached.
  • Product 2: High-contrast dual-range scale is easy to read, even in low light.
  • Product 2: Reversible ratchet head drives in both directions and measures torque in clockwise direction.
Check Stock

Bestgle 12 inch Length Quick Release Screwdriver Drill Bit Holder Extension Bar 1/4\ Hex Shank Quick Change Extension Rod Socket for Screws Nuts Drill Hand-held Driver

  • ...an be bent, twisted and rotated at many different angles.
  • it can be drilled into a small space, in a variety of gaps, let this flexible drill bit extension tool help you solve more problems quickly..
  • 【Applicability】compatible with small wrench cordless screwdriver or low speed dc hand drill pneumatic screwdriver torque drill or electric screwdriver.
  • mainly for computer chassis, electrical cabinets, furniture, electrical appliances and other narrow space screwdriver..
  • 【Practicality】flexible drill shaft head can be installed hexagonal handle (1/4 handle) head, mainly for computer chassis, electrical cabinets, furniture, electrical appliances and any narrow space and other screwdriver..
  • 【Note】use a charging screwdriver or electric drill (not for impact drills). If there is no torque adjustment, it is not suitable for the drill bit. If there is no torque adjustment, the damage of the auger and the shaft will continue to rotate. It can make sure the flexible shaft work better with the drill and never damage the shaft..
Check Stock

Witproton Ball Splines - Standard 8mmX300mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 2 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 280 In-lb Torque, 18 Position and 22pcs Drill/Driver Bits

  • 【20 Voltage & 2 Variable Speeds】Higher voltage means more torque-spinning strength to overcome resistance. 2 variable-speed ( 0-350 & 0-1350 RPM) power drill with an adjustable clutch gives you versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed for drilling holes..
  • 【18+1 Position Clutch & 280 In-lb Max Torque】 The drill's clutch gives a user more control over the amount of torque applied to a screw to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 18 Torque allows for various tasks and additional 1 torque for drilling..
  • 【2 x 1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator let you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
  • 【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits on your purposes. LED Light for increased visibility in enclosed ....
Check Stock

Witproton Ball Splines - Both Ends Tapped 8mmX270mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Witproton Ball Splines - One End Tapped 10mmX350mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

TEKTON 3/8 Inch Drive Click Torque Wrench (10-80 ft.-lb.) | 24330 & 1/4 Inch Drive Click Torque Wrench (20-200 in.-lb.) | 24320

  • Includes 1-pc. 3/8 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Wrench emits a click that can be heard and felt when the preset value is reached.
  • High-contrast dual-range scale is easy to read, even in low light.
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction.
  • Includes 1-pc. 1/4 in. drive torque wrench.
Check Stock

Nb Ball Spline Nut 13 mm Bore Dia x 36 mm L

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Witproton Ball Splines with Both Ends Stepped and Tapped 13mmX250mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

CTS Pot, 500k Audio, Long Split Shaft (4 Pack)

  • Genuine CTS pots, the brand used by nearly every American guitar company for half a century!.
  • 500k 10% audio-taper, mimics the logarithmic way humans perceive changes in volume better than any other taper..
  • 24-tooth knurled split-shaft, for 24-tooth plastic knobs that push on. Included brass sleeves convert shafts to quasi solid-shaft, for knobs with setscrews..
  • 3/8-32 bushing thread is 3/8" diameter, 1/2" long. For rear-routed guitars..
  • CTS low torque design (dimpled back) is easy to turn..
Check Stock

TEKTON 1/4 Inch Drive Click Torque Wrench (20-200 in.-lb.) | 24320 & 1/4 Inch Drive Hex Bit Socket Set, 10-Piece (2-8 mm) | SHB90102

  • Product 1: Includes 1-pc. 1/4 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Product 1: Wrench emits a click that can be heard and felt when the preset value is reached.
  • Product 1: Permanently marked, high-contrast dual-range scale is easy to read, even in low light.
  • Product 1: Reversible ratchet head drives in both directions and measures torque in clockwise direction.
  • Product 2: Includes 10-pc. 1/4 in. drive hex bit sockets: 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8 mm.
  • Product 2: S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
  • Product 2: 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners.
  • Product 2: Large, clear die-stamped size marking is easy to read and can’t wear off.
Check Stock