Bellari VP130 MK2 Tube Phono Preamp/Headphone Amplifier
- It vividly and naturally recreates recordings and has a uncanny ability to compliment any turntable. The Bellari VP130 further defines its position as....
- “The Bargain of a Lifetime Tube Phono Stage. For (this price), the Bellari Tube Phonostage offers warm musical sound and may be just what the doctor....
- “I was surprised by how attractive and well balanced it sounded: smooth and warm, yet open and crisply detailed. The Bellari seemed to create a....
- Cartridge Compatibility: Moving Magnet or High output Moving Coil Gain: 38.9 dB gain @ 1kHz with 12AX7 Tube Input Impedance: 47k ohms Output....
- Equalization: RIAA +/- .9 dB, 20Hz to 20kHz THD .05% @ 1KHz S/N Ratio: 103 dB, unweighted Crosstalk: -75 dB Size: 6″w x 2.5″h x 5.4″d.
Check StockFiio E07K Andes USB DAC and Portable Headphone Amplifier Black
- Right & Left Channel Balance Settings - Right and left output can be adjusted in order to appeal to users with different ear sensitivity..
- Bass Adjustment - Independent bass adjustment function provides 20-shifting choice from -10 to +10..
- Treble Adjustment - Independent treble adjustment function provides 20-shifting choice from -10 to +10..
- Line Output - LO BYPASS switch can relize direct line output which should be used together with E09K or L7..
- Gain Selection - Three levels of gain selection at 0Db, 6Db and 12Db..
Check StockWinegard HDA-200 Distribution Amplifier Adjustable Gain 5-1000 MHz 24dB
- Single Rf Output With A 5mhz-42mhz, 2-way Bi-pass At +12db Gain.
Check StockPro-Ject Tube Box DS2 (Black)
- Tube assembly: 2x ECC83 (12AX7) Input impedance variable: 10-1000 Ohms, fix 47 kOhms.
- Gain: MM / MC 40 / 45 / 50 / 60 / 65 dB Output voltage: typically 500 mV/1kHz at 5mV/1kHz (at 40dB).
- Signal-to-noise ratio: 88dBA THD: < 0,04%.
- RIAA curve accuracy: +/- 0,2dB/20Hz - 20kHz Subsonic filter: 20Hz @ 18dB/octave Input / Output: 2x R.
Check StockPro-Ject Tube Box DS2 (Silver)
- Tube assembly: 2x ECC83 (12AX7) Input impedance variable: 10-1000 Ohms, fix 47 kOhms.
- Gain: MM / MC 40 / 45 / 50 / 60 / 65 dB Output voltage: typically 500 mV/1kHz at 5mV/1kHz (at 40dB).
- Signal-to-noise ratio: 88dBA THD: < 0,04%.
- RIAA curve accuracy: +/- 0,2dB/20Hz - 20kHz Subsonic filter: 20Hz @ 18dB/octave Input / Output: 2x R.
Check Stockrolls PM55P Personal Monitor Amp Battery Opt
- Built in switchable Optical Limiter XLR Mic In & Pass Through Ground lift on XLR signal Stereo/Mono 1/4-in Monitor Input.
- 3 5mm & 1/4-in Headphone outputs Powered by one 9 volt battery or the included PS27s power supply Lots of output level it's loud Belt clip is included.
- Max Input Level -20 dB XLR 40 dB monitor Input Impedance 600 Ohm Mic - 22k Ohm Monitor Output Impedance 10 Ohms Gain 20 dB 1/4-in 50 dB XLR. Bandwidth: 50 - 20 kHz (kiloHertz).
- S/N Ratio 90 db Limit Threshold 0 db Current Draw 70 Mils Nominal Max Output Level 100 Mil Watts @ 16 Ohm Power 9 - 15 VDC.
Check StockMUSYSIC Professional 2 Channel 9000 Watts DJ PA Power Amplifier Signal out MU-P9K
- Stereo Output Power: "2x5600W PEAK, 2x2800W Program, 2x1400W RMS @ 2Ω" "2x2800W PEAK, 2x1400W Program, 2x700W RMS @ 4Ω" "2x1400W PEAK, 2x700W Program, 2x350W RMS @ 8Ω".
- Bridge Output Power: "5600W PEAK, 2800W Program, 1400W RMS @ 4Ω" "2800W PEAK, 1400W Program, 700W RMS @ 8Ω".
- Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) <0.23%20Hz-20KHz / Siew Rate >30V/us / Damping Factor >150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk >80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
- Dual cooling fans / Connectors Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
- Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check StockMUSYSIC Professional 2 Channel 7000 Watts DJ PA Power Amplifier Signal out MU-P7K
- Stereo Output Power: "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @2Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @4Ω" "2x1000W PEAK, 2x500W Program, 2x250W RMS @8Ω".
- Bridge Output Power: "4000W PEAK, 2000W Program, 1000W RMS @4Ω" "2000W PEAK, 1000W Program, 500W RMS @8Ω".
- Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) : <0.23%20Hz-20KHz / Siew Rate >30V/us / Damping Factor >150 / Output Circuitry: Class AB / Signai to Noise Ratio ≥96dB / Cross Talk >80dB / lnput Sensitivity(8Ω) 1V /.
- Connectors: Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
- Dual cooling fans / Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit. / lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit. / Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check StockMUSYSIC MU-D16K Professional 2-Channel 2x8000 Watts D-Class 1.5U Power Amplifier
- ...y(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
- Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 90v-250v 50Hz.
- Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check StockMUSYSIC MU-D9600 Professional 4-Channels 2x9600 Watts D-Class 1U Power Amplifier
- ...) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
- Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 115v-230v 50/60 hz.
- Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
- After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check StockRed Panda Tensor Pedal
- A full-fledged studio-grade preamplifier, EQ, and distortion generator with multi-instrument and microphone compatibility.
- The Gain section controls the overall volume of the unit, the amount of gain between the two internal gain stages, and the gain of each preamp stage in five stages.
- Using the new Hi/Lo switch, get ultra clean sounds without breakup when distortion is not needed or achieve a broad spectrum of overdrive, distortion, and fuzz sounds.
- A -20dB pad switch on the right side of the unit tame the volume for high output microphones when in XLR input mode.
- The new Shift knobs in the EQ section adjust the range of frequencies that the Treble, Middle, and Bass knobs control to give you precision control over the EQ.
- The Hi-Pass section spans from 60Hz to 800Hz with a 6dB per octave slope.
- Offers 100% clean signal even on acoustic guitar, silent switching to eliminate "switch-pop", and passing phantom power to condenser mics.
Check StockSound Advice on Equalizers, Reverbs and Delays (Instant Pro)
- Featuring: Adjust gain Control / Output level Display/ EQ Slide Control / Subwoofer Xover Points / Subwoofer Switch.
- EQ Center Frequencies: 60, 150, 400, 1K, 2. 5K, 6K and 15Khz / Equalization Range: +/- 12dB.
- Input Impedance: 100 Ohm / Input Sensitivity: 4 Volts for 500mV out.
- Frequency Response: 20hz to 20kHz +/- dB / Crossover Rolloff: 12dB/Octave / Power Requirement: 11-16V DC.
Check Stock16mA Logarithmic Amplifier Module 100 DB Amplifier Board 5MHZ‑500MHZ SMA Detector Module for FSK PSK Demodulation Signal Reception
- Logarithmic Amplifier Module: Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
- RSSI Linearity: ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
- Apply to: Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
- Specific Parameters: 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain. Dynamic Range: 100 dB -78 dBm to +22 dBm (Re 50 O). Total Gain: 100 dB. Bandwidth: 500 MHz. Sleep Current: 003c1mA..
- Founction: AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation. Input and Output Interface: SMA Female..
Check Stock