Purple PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockRed PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockIce White PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool has an ID=2-3/8″, OD=8″, and is 2.5″ wide.
- Recommended Settings: Nozzle Temperature 195 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockNeon Green PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament…
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockMidnight Black PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockHoney Gold PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockPearly Silver PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockMetallic Gray PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockPLA 3D Printer Filament 1.75mm SUNLU PLA Filament Dimensional Accuracy +/- 0.02 mm 1 kg Spool PLA 1.75 Black
- 【1KG(2.2 lbs) Spool】Spool Diameter: 8.00"-Spool Width: 2.50"-Spool Hub Hole Diameter: 2.20". SUNLU Strong Coils Design Help Your 3D Printing More....
- 【1.75mm PLA Filament】SUNLU PLA 3D Printer Filament 1.75mm, PLA 1.75 Dimensional Accuracy +/- 0.02mm. No Pungent Smell in Printing, No Harm to User....
- 【Tangle Less & Clog-free & Bubble-Free】Full Mechanical Winding and Strict Manual Examination, Which Guarantee the SUNLU PLA filaments tidy and....
- 【High Compatibility】SUNLU PLA Filament Works Perfectly with Most FDM 3D Printers on the Market, Such as Ender 3, CR 6, A 8, CR 10, Maker Bot, Mono....
- 【Recommend Settings】PLA Filament Extrusion/Nozzle Temperature 215-230℃, Bed 70℃-80℃. SUNLU 3D Filament are the Most Common Used Filaments....
Check StockSwimming Pool Cover Pump 850 GPH Submersible Sump Pumps Above Ground with 3 Adapters Drainage Hose 25 ft Power Cord (Blue)
- ...ltering function faster than the ordinary pump..
- Safty&Versatile: Built-in temperature control chip, connected or disconnected with temperature changes,don’t worry about burning the pump, safety in use. Extra length 25ft Power Cord, for large area use.
- 16ft drainage hose, suitable for the 1/2 ” water nozzle, can drain from any depth of the pool.3/4″ water nozzle and 3/4” crooked water nozzle is suitable for drainage hoses and garden hoses..
- Customer help: The pump comes with a user technical manual. We guarantee it for one year. Contains all of the packages. We provide 100% satisfactory customer service with 24 hours/7 days..
Check Stock3D Printer PLA Filament 1.75, JAYO Grey PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1KG Spool, PLA Grey
- 【1.75MM Diameter ±0.02mm, Smoothly Printing】 JAYO PLA filament made of premium PLA raw material, advanced CCD diameter measuring and self-adaptive control system in the manufacturing process, dimensional accuracy is 1.75mm+/- 0.02mm, easy to print without clogging. Spool is 1KG spool(2.2lbs)..
- 【Strong Adhesion, Low Odor】 JAYO PLA filament produce in strictly procedures, no bubbles, ultra smooth technology, low odor, provide you a pleasure printing experience..
- 【100% Vacuum Packaging】 Good vacuum packing ensures the filament are dry and in good toughness, not easy to break..
- 【Compatible with 99% FDM 3D Printer】 JAYO PLA filament 1.75mm works perfectly on 99% FDM 3D printers, because most DIY printers use 1.75mm in size. Recommended printing temp/nozzle temperature: 215-230℃, base plate temperature: 70°C..
- 【12 Months Warranty & Friendly After-Sales Service】 N.W 1KG PLA, welcome guide, 12 months warranty, and friendly after-sales service. Let’s buy it now!.
Check StockTTYT3D 18 Popular Shiny Silk Colors PLA 3D Printer Filament Refill Sample Pack,3D Pen Filament,Each Color 4m Length Total 72m Filament
- Great Silk PLA Sample Pack for 3D Printer: Include 18 Different Most Popular Silk Shiny Colors, Each Color 4 Meters Length, Perfectly For Silk PLA....
- Premium Quality, Universal compatible with most 1.75mm 3D Pens/3D Printers on market, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent....
- Printing Tips: Suggest Use 0.5mm New 3D Printer Nozzle,Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 215°C, To Avoid being Tangled,....
- Package: Total 18 Different Beautiful Shiny Silk PLA Pack Together.
- 100% Satisfy Warranty: Within 24 Hours Reply,100% Satisfaction Guarantee, If You're not Completely Satisfied for Any Reason, Contact us and We'll Help....
Check StockDark Forest Green PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check Stock