USB charging cable compatible for Canon PowerShot SX530 HS, SX710 HS, SX700 HS, SX540 HS, SX610 HS, SX500 is, SX420 is, SX410, SX400 is, SX280 HS, SX260 HS, SX230 HS, SX160 is, SX150 is, SX50 HS, SX40

  • Compatible with Canon PowerShot SX530 HS, SX710 HS, SX700 HS, SX540 HS, SX610 HS, SX500, SX420, SX410, SX400, SX280 HS, SX260 HS, SX230 HS, SX160, SX150, SX50 HS, SX40.
  • Durable Cables: Sturdy Boot Gives this Cable Added Strength and Durability, Over 15000+ Bend Lifespan..
  • Hi-Speed Syncing: Supports Up to 480 Mbps Data Transmission Speed..
  • package:1 x High Quality USB Charging Cable.
Check Stock

CreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches

  • Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C,Output Power: -8.2~-1dBm,Receiver Sensivity: -11.5dBm,Interface: LC.
  • Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
  • Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
  • Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
  • You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Check Stock

TARAZON 21\ 19\ Front Rear Complete Wheel Set Rims Spokes Red Hubs for Honda CRF250R CRF450R 04-12 CRF250X CRF450X 04-17

  • 1.Size:Front wheel size:1.6*21'',Rear wheel size:2.15*18''.
  • 2.Fitment:EXC/EXC-F/EXC-W/XC-W,SX/SX-F/XC/XC-F,SX-F 125-530cc 2003-2022 All models(If you cannot make sure the fitment,please feel free to contact us).
  • 3.Material:6082T6 Aluminum Hubs,Anodized 7050T6 Aluminum Gloss Rim,304 Stainless Steel Spoke with Brass Nipple.
  • 4.Package Included:1.6*21'' front wheel,2.15*18'' rear wheel,front 260mm disc,rear 220mm disc and rear sprocket.Bearings assembled, spacers and seals packaged..
  • 5.Our wheels were fully adjusted and spokes were tightened during assembly. However, we still recommend checking and tightening spokes on both front and rear wheels before riding, this is to keep wheels at a balanced level of tension in their components..
Check Stock

CB-2LY Battery charger for Canon NB-6L NB-6LH Battery and Canon PowerShot D10, D20, S90, S95, S120, SD770 IS, SD980 IS, SD1200 IS, SD1300 IS, SD3500 IS, SD4000 IS, SX170 IS, SX240 HS, SX260 HS, SX270 HS, SX280 HS, SX500 IS, SX510 HS, ELPH 500 HS

  • 100% Compatible with : Canon NB-6L NB-6LH Battery and Canon PowerShot D10, D20, S90, S95, S120, SD770 IS, SD980 IS, SD1200 IS, SD1300 IS, SD3500 IS, SD4000 IS, SX170 IS, SX240 HS, SX260 HS, SX270 HS, SX280 HS, SX500 IS, SX510 HS, ELPH 500 HS.
  • Worldwide Input Voltage: 100v - 240v ( World Charger ) , Charger Plugs Directly into Wall outlet ( no ac cord needed ).
Check Stock

MAYASAF Engine Timing Chain Kit for Nissan 1990 Axxess/90-94 D21/1989-90 240SX/1990-92 Stanza, KA24E 2.4L L4 Engine Only, OE Replacement Timing Chain Sets With Gaskets and Oil Seal

  • 【Exact OEM Fit】1990-1994 for Nissan D21 2.4L 2389CC L4 SOHC, 1995-1997 for Nissan PICKUP 2.4L 2389CC L4 SOHC, 1989-1990 for Nissan 240SX 2.4L 2389CC L4 SOHC, 1990-1992 for Nissan STANZA 2.4L 2389CC L4 SOHC, 1990 for Nissan AXXESS 2.4L 2389CC L4 SOHC..
  • 【Package Including】Timing chain * 1, Sprocket * 2, Tensioner * 1, Guide * 2, Gasket * 3, Oil seal *1 bag..
  • 【Easy Installation】Direct replacement and easy installation, perfectly compatible with your original equipment, Utilizes the latest in design and material technology, ensuring the quiet and maintenance-free experience..
  • 【Premium Quality】Made by OE supplier that meets or exceeds OE standards, built with premium quality material and 100% tested before shipping, Compared with the belt drive, timing chain drive has reliable transmission, good durability, and space-saving, and is maintenance-free and safe for life..
  • 【Worry-free Aftermarket】Well-packaged and free shipping by USPS/Amazon shipping/UPS, experienced customer representative response within 24 hours. Any problems please feel free to contact us first, let's make it right!.
Check Stock

StanceMagic 38mm (1.5 inch) Hubcentric 4x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) Compatible with Nissan 200sx 240sx 240z 260z 280z 280zx 300zx Altima Maxima Sentra - Pack of 2

  • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 4/114.3 (4/4.5") Bolt Pattern and 66.1mm Centerbore. Compatible with Nissan 88-93 200SX (1.8 Turbo), 89-98 240SX (Base Model), 70-85 240Z (Rear Hub), 70-85 260Z (Rear Hub), 70-85 280Z (Rear Hub). Also compatible with Nissan 93-01 Altima, 90-95 Axxess, 09-14 Cube, 84-88 Maxima, 83-86 Sentra, 00-12 Sentra (2.0i). Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are M12x1.25 12x1.25mm threads.
  • 2) You have 1.5" (38mm) of space between your fender and your wheel/tire.
  • 3) Your factory wheel studs are shorter than 1.5" (38mm) (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 4) Wheel center bore needs to be no smaller than 66.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.5" (38mm) Wide | Bolt Pattern: 4x114.3 (4x4.5") | Hub Bore: 66.1mm | Lip Diameter: 66.1mm | Stud/Nut Thread Pitch: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat tr....
Check Stock

Evergreen EMS3015 Compatible With Nissan 240SX Altima Frontier Xterra 2.4 DOHC KA24DE Exhaust Manifold Gasket

  • Fits: Nissan 240SX Altima Frontier Xterra 2.4 DOHC KA24DE.
  • Withstand high and low temperatures to provide a reliable seal with minimal tightening.
  • Each gasket and gasket set is made to be durable and long-lasting.
  • Yield significant and noticeable improvements to your car engine overall.
  • Specialized designs to ensure a perfect fit and correct operation.
Check Stock

CB-2LY Charger for NB-6L NB-6LH Li-ion Battery Canon PowerShot D10 D20 S90 S95 S120 SD770 IS SD980 IS SD1200 IS SD1300 IS SD3500 IS SD4000 IS

  • 100% Compatible with : Canon NB-6L NB-6LH Battery and Canon PowerShot D10, D20, S90, S95, S120, SD770 IS, SD980 IS, SD1200 IS, SD1300 IS, SD3500 IS, SD4000 IS, SX170 IS, SX240 HS, SX260 HS, SX270 HS, SX280 HS, SX500 IS, SX510 HS, ELPH 500 HS.
  • Package Included : 1X Charger, 1X cord, ( Charger and Cord only,Battery not included).
Check Stock

TRICO Exact Fit 10 Inch Pack of 1 Rear Wiper Blade For Car 10-B

  • EASY INSTALLATION: Trico rear windshield wiper is intended to be a quick DIY in minutes so you spend less time installing, and more time on the road....
  • SENSE OF SAFETY: Trico rear windshield wiper blade for car powerfully wipes away droplets and moisture for clear visibility during harsh weather....
  • CLEAN CUT VIEW: Experience a highly transparent sheen with Trico back windshield wiper. Your rear windshield will be free of messy streaks and....
  • VEHICLE FIT: 10 inch rear wiper blade fits Honda HR-V 2016-2018, Infiniti QX56 2011-2013, Infinti QX80 2014-2018, Mini Cooper Clubman 2016-2019,....
  • VEHICLE FIT: Trico Rear wiper blades fit car models such as Nissan Leaf 2011-2017, Suzuki SX4 2007-2013, Suzuki SX4 Crossover 2012, Mitsubishi....
Check Stock

IENZA Replacement HTC-100 HDMI Cable Cord Camera to TV Monitor Display HDMI Cable Compatible with Canon EOS Rebel SL1 SL2 T1i T2i T3 T3i T4i T5 T5i T6 T6i T6S T7 T7i

  • This HDMI is compatible with Canon HTC-100 HDMI cable. This cable will allow to conveniently view your camera pictures / photos or movies on your home....
  • COMPATIBLE WITH Canon EOS Rebel SL1, SL2, T1i, T2i, T3, T3i, T4i, T5, T5i, T6, T6i, T6S, T7, T7i, EOS 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R,....
  • Also compatible with Canon PowerShot SX1 IS, SX160 IS, SX20 IS, SX200 IS, SX210 IS, SX220 HS, SX230 HS, SX240 HS, SX260 HS, SX270 HS, SX280 HS, SX30....
  • ADDITIONAL COMPATIBILITIES: Compatible with Canon Cameras or Camcorders that require HTC-100 HDMI Mini Cable. This cable is also known as: 1. Camera....
  • ienza is a registered trademark. Use of the ienza trademark without the prior written consent of ienza, LLC. may constitute trademark infringement and....
Check Stock

BUCKLOS 26/27.5/29\ Mountain Bike Wheelset, Carbon Hub MTB Wheels Quick Release Disc Brakes, 24H Low-Resistant Flat Spokes Bike Wheels fit 7-11 Speed Cassette

  • Smooth Seal BearingMTB bike Wheel use the structure of Front 2 and Rear 5 bearings, It effectively increase the transmission efficiency, makes your long-distance riding easier..
  • Lighter StrongerMountain bike wheelset is made of carbon fiber hub, aluminum alloy rim, makes the wheelset lighter and tougher..
  • Easy InstallmentEach bike wheels equipped with a quick release lever, even if you are a beginner, you can install the mountain bike wheelset within 10s. (100 x 9mm/Front, 135 x 10mm/Rear).
  • Unique DesignThe spokes of the bicycle wheelset adopt a unique flat design, which reduces wind resistance and increases speed during riding..
  • Fast shippingBicycle wheelset will be delivered to you about 10 working days after you place your order. If there is any defective which you received, please contact us and we will give you a satisfaction solution..
Check Stock

Panari 17211-899-000 Air Filter + Housing Cover for GX240 GX270 GX340 GX390 EB3500X EB3800X EB4000 EM3000 EM3500X EM3800SX Portable Generator

  • For generators equipped with GX240 GX270 GX340 GX390 engine.
  • For generator EB3000 EB3500X EB3800X EB4000 EB5000X EB6500SX EB6500X EG4000CL EG5000CL EG6500CL EM3000 EM3500SX EM3500X EM3800SX EM4000 EM5000SX....
Check Stock

Oregon Scientific THGR511 Replacement Sensor

  • Additional or Replacement 3 Channel Temperature and Humidity Sensor for X Model Weather Stations.
  • compatible with the following models: BAR208HGX, BAR206SX, RAR502X, RAR505SX, BAR800X, and RGR126X.
Check Stock