Categories

Best 24kv Load Break Switch

Tenda Layer-3 Managed PoE Switch|24 Port GE Ports| 4x1G Base-X SFP| 1 Console Port | VLAN | QoS | DHCP Snooping TEG5328P-24-410W

  • ...ent in which Layer-3 networks should be interconnected while Layer-2 networks should be isolated, thus realizing an efficient and fast layer-3 routing forwarding.
  • 【410W PoE power supply】：Offers 24 gigabit PoE ports complaint with IEEE 802.3af and IEEE 802.3at. With a maximum 370 W PoE output power of the whole switch, and a maximum 30 W PoE output power of a single port, the switch helps provide stable power and data transmission for gigabit WLAN and high definition digital monitoring devic-es.
  • 【Sound security features】：Supports IP address filtering, MAC address filtering, ARP filtering, DoS attack defense, and ACL access control list, improving network security.
  • 【Dual 6 kV professional lightning protection】：Provides dual 6 kV port and power lightning protection, and supports multiple protection features, such as PSE short circuit protection, PoE overload protec-tion, power over-temperature and overvoltage protection, and surge current protection.
  • 【Lifetime free tech-support】 - Tenda provides an industry-leading 3-year with FREE lifetime 24/7 dedicated tech-support team Call us at (800) 570-5892 or email us at Support [email protected] cn.
Check Stock

SSR-100DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 100A

  • Model: SSR-100DD, single phase Solid State Relay 100A DC to DC control, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 100 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

Amprobe ACD-14-PRO Digital Clamp Multimeter

  • Verify presence of voltage from 30 V AC to 122,000 V AC (122 kV) in transmission lines, power distribution equipment, down power lines, fuses, and load break connectors.
  • Easy to use! Push one button to turn the unit on, another to select low or high range setting. The unit flashes and beeps with increasing frequency as it nears a source of electricity, leaving no doubt whether the source is live or not..
  • Has a lower voltage setting for checking voltage presence in breaker panels, breakers, power outlets and wiring.
  • PPE gloves? No problem! Push button functionality allows for ease of use.
  • Self-test verifies instrument works properly.
  • Ergonomic design with a convenient handle.
Check Stock

SSR-25DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 25A

  • Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

Loulensy 3-Phase AC Voltage Transducer Sensor Transformer Transmitter 3-Input 0-300V AC with 3-Output 0-5V DC

  • Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
  • Impulse Voltage:5KV(peak value),1.2/50uS.
  • Default Frequency:40-60Hz(contact us,if you specially need different frequency,e.g. 100Hz).
  • Load Capacity: 2 times current continuous.
  • Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
  • Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
  • Storage Temperature:-40 to 70 degrees Centigrade,20% to 95% without condensation.
  • Working Stability: annual change 003c 0.2%.
  • Working Environment:-10 to 50 degrees Centigrade,20% to 90% without condensation.
  • Isolation Resistance:003e/=20M Ohm(DC513V).
Check Stock

Loulensy 3-Phase AC Voltage Transducer Sensor Transformer Transmitter 3-Input 0-450V AC with 3-Output 4-20mA DC

  • Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
  • Impulse Voltage:5KV(peak value),1.2/50uS.
  • Default Frequency:40-60Hz(contact us,if you specially need different frequency,e.g. 100Hz).
  • Load Capacity: 2 times current continuous.
  • Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
  • Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
  • Storage Temperature:-40 to 70 degrees Centigrade,20% to 95% without condensation.
  • Working Stability: annual change 003c 0.2%.
  • Working Environment:-10 to 50 degrees Centigrade,20% to 90% without condensation.
  • Isolation Resistance:003e/=20M Ohm(DC520V).
Check Stock

Tenda 8 Port Fast Ethernet Switch（S108）| Desktop Ethernet Splitter | Ethernet Hub | Plug and Play | Fanless & Quiet | Unmanaged

  • 6 kV Lightning Protection: The switch offers various safety and protection types, including 6 kV lightening protection, PSE short-circuit protection, PoE overload protection, surge current protection etc..
  • Dual Uplink Port: With two 10/100Mbps uplink ports, the switch can meet the current demand for uplink bandwidth with NVR and router connection..
  • Standard PoE Power Supply: The switch support IEEE 802.3at/af standards. The entire switch offers a maximum PoE power output of 58 W, and 30 W for a single port, to supply power to and data transmission with IP cameras..
  • 250 m Data Transmission:I t supports extend mode and one-key VLAN. The hardware DIP mode switch makes long distance transmission effortless..
Check Stock

Tenda TEG1016D 16-Port Gigabit Ethernet Switch

  • Tenda Switch Gigabit TEG1016D 16-Port Gigabit Ethernet Switch.
  • Dedicated for security surveillance and SMEs.
  • 16*10/100/1000 Mbps auto-negotiation RJ45 ports, up to 2000 Mbps of full duplex transmission rate, line-speed forwarding by all ports, and large cache capacity ensure the timely transfer of large files and stable streaming video..
  • Professional integrated lightning protection circuit enables all the 16 ports to provide IV-class (6 kV in common mode) lightning protection, effectively decreasing the damage rate to the ports by lightning surge.
  • The built-in power supply module is designed with enhanced lightning protection, which can withstand 6 kV lightning surge, 3 times higher than other ordinary switches, effectively protecting the switch from being damaged by adverse thunderstorm..
Check Stock

Bowens BW-1667 Internal Diffuser 80 (Black)

  • Protections surge, over-temperature, over-current.
Check Stock

PowderCoatPro 80Kv Powder Coating Gun Kit System Perfect Electrostatic Spray Powder Coat Machine for Home and Small Business Powder Coaters

  • [Easy to Use] No learning curve to use. Just turn on the controller, turn the knob to the Kv setting on the powder label, squeeze the trigger and you’re ready to powder coat.
  • [More Power (Kv)] With 40% to 60% more Kv power than other gun kits in its class, 2nd and 3rd coats are a snap. 80Kv of pro-grade powder charging produces smoother finishes and less wasted powder saving you money.
  • [Fast Color Changes and Easy Cleanup] Change colors in seconds. Just twist off the cup, blow out the gun with compressed air and load your next color. When you’re done, cleanup is just as fast and easy..
  • [Twin Ground Systems] The only gun in its class to feature twin-grounding systems for superior performance and results. With this feature you can clip the ground directly to the part or use a grounding rod for pro-level finishes..
  • [Help with Faraday Cages] Faraday cages are a fact of life with powder coating, but thanks to the “Zero Kv” feature you can turn the powder charge off to help collapse Faraday cages and get the powder into those tight spots..
Check Stock

PowderCoatPro Model KV80 Powder Coating Gun Kit System Perfect Electrostatic Spray Powder Coat Machine for Home and Small Business Powder Coaters

  • [Easy to Use] No learning curve to use. Just turn on the controller, turn the knob to the Kv setting on the powder label, squeeze the trigger and you’re ready to powder coat.
  • [More Power (Kv)] With 40% to 60% more Kv power than other gun kits in its class, 2nd and 3rd coats are a snap. 80Kv of pro-grade powder charging produces smoother finishes and less wasted powder saving you money.
  • [Fast Color Changes and Easy Cleanup] Change colors in seconds. Just twist off the cup, blow out the gun with compressed air and load your next color. When you’re done, cleanup is just as fast and easy..
  • [Twin Ground Systems] The only gun in its class to feature twin-grounding systems for superior performance and results. With this feature you can clip the ground directly to the part or use a grounding rod for pro-level finishes..
  • [Help with Faraday Cages] Faraday cages are a fact of life with powder coating, but thanks to the “Zero Kv” feature you can turn the powder charge off to help collapse Faraday cages and get the powder into those tight spots..
Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

  • ...steel truss head screws (#10, 1/2") for immediate installation.
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and thickness 5mm (0.2”).
Check Stock

4K HDMI USB KVM Extender TCP/IP Over Single Cat5e/6/6a/7 up to 120M(390ft), 1080P@120Hz, Plug & Play, Keyboard & Mouse Over Network, Zero Latency, 3 Ports USB Hub, DIP up to 16 Sets (4KIP100-KVM)

  • 【120Hz High Refresh Rate】4K@30Hz and 1080P@120Hz over a single CAT5e/6/6a/7 Ethernet cable up to 120M(390ft) flawlessly.
  • 【3 Ports USB2.0 Hub】1 x USB-Host built in transmitter, 3 x USB-Devices hubs built in receiver. High-speed USB2.0 up to 480Mbps..
  • 【DIP Switch up to 16 Sets】 Support 4-Pin DIP switch for more sets works in a same network. To route the signal from a transmitter (TX) to a receiver (RX), toggle each DIP Switch in RX to the same position of TX. If you require a RX to link another one TX, change the DIP Switch in RX as same DIP Switch position of the TX you want. ***Note: 1. Repower TX and RX for DIP switch changes to take effect. 2. One TX only can be paired with one RX, not with two more RXs..
  • 【Application Scenarios】You can remote control PC, PS, Xbox with keyboard, mouse and gamepad. Interactive Display Operation, Data transmission and USB streaming up to 100m. Works with all operation systems: Windows, Mac, Linux. No Driver Needed, plug & play.【Importance】When Transmitter and Receiver was connected over switch, to guarantee constant 800M high bandwidth, they MUST work with Gigabit switch, NOT with Hundred Megabyte switch..
  • 【High Reliability】Power adapter has a locking connector for a s....
Check Stock