Enduro ABEC-5 Angular Contact Bearing, 71903 17X30X7-71903 LLB

  • Single-row angular contact ball bearing, supporting moderate to heavy one-directional thrust loads, and combined loads where thrust load is predominant.
  • Ball contact angle of 40 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Open configuration for lubrication applied in place.
  • Brass cage evenly spaces balls for reduced friction, vibration, and noise.
  • ABEC 1 tolerance ratings for accuracy and low rotational speeds.
Check Stock

Drill Chicago X Drill Uk

  • Manufactured to NAS 907 Type B geometry aerospace specifications with 135 degree P3 split point is self-centering for reduced thrust and easier penetration and Heavy-duty construction for drilling in tougher materials.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Manufactured from premium high-speed steel.
Check Stock

Bridgestone Golf e12 Soft Golf Balls, Matte Red (One Dozen)

  • Active Acceleration Mantle: e12 SOFT features the Active Acceleration Mantle which is comprised of a new High Performance Polymer material with added surfactant that creates increased thrust and higher initial ball velocity at impact..
  • Delta Dimple: The e12 SOFT utilizes Bridgestones patented Delta Wing Dimple pattern for less drag and smoother airflow when the ball is in flight. The enhanced aerodynamics increase the straight distance properties of e12 SOFT..
  • Package Dimensions : 10" L x 2" W x 6" H.
Check Stock

USA Standard Gear (ZIKC8.25-S-29) Open Spider Gear Set for Chrysler 29-Spline 8.25 Differential

  • USA Standard Gear open spider gear set for Chrysler 8. 25", 29 spline.
  • Includes Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt and Spider Gear Thrust Washers.
Check Stock

XMHF 4pcs 51204 Carbon Steel Axial Thrust Ball Bearing 20mm x 40mm x 14mm

  • Package Content : 4x Thrust Ball Bearing.
Check Stock

XMHF 51203 Thrust Bearing 17x35x12mm Thrust Single Ball Row Bearings 3Pcs

  • Dimensions: 17mm x 35mm x 12mm/0.67”x1.4”x0.47”.
  • Package Content: 3 x Thrust Ball Bearing.
Check Stock

Pure Carbon Fiber Fins, Adult Long Blade Fins for Freediving and Spearfishing

  • Flexible DesignProprietary Pure Carbon, Single fin blade, Ultra light(only 0.62kg), High performance, that maximizes flexibility and reactivity.
  • 29° Blade Angle29-degree angle between blade and foot optimizes thrust power with less effort.
  • Tri-density Full Foot PocketSoft foot pocket upper for reduced foot fatigue, its reinforced base is stiff and responsive, from there it becomes progressively thinner and more flexible, allowing for maximum energy transfer.
  • U-TipU-Tip to prevent slipping from side to side while kicking.
  • Side Ribs Support Blade, Channeling Water Flow. Side Ribs (stringers) Prevent Lateral Slippage.
  • Prolonged Usethe Pure Carbon Fins are appreciated by those looking for a scuba fin or freediving for prolonged use and able to give a good return of thrust.
Check Stock

Huber ZIP System Liquid-Flash | 29-ounce Applicator Gun

  • Professional-grade 29-ounce high-thrust ratio caulk gun.
  • Thrust ratio of 18:1 for use with high viscosity materials.
  • Zinc alloy handle and trigger for corrosion resistance.
  • Smooth pressure rod requires less force and is quieter than a ratchet-style pressure rod.
Check Stock

Othmro 51206 Thrust Ball Bearing 30mmx52mmx16mm High Temperature Bearing Steel Single Row Rolling 1pcs

  • [SIZE] - Bore Diameter=30mm, Outer Diameter=52mm, Thickness=16mm.
  • [MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness.
  • [CAPABILITY] - Dynamic Load Rating (Cr): 29.3kN.
  • Limiting Speed (Grease): 3400rpm, designed for low speed operation and axial loads only.
  • [APPLICATION] - Can be used for oven turntable, jack, pump, rotating applications, machine tools, automobiles, ect..
  • [FEATURES] - The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time.
Check Stock

Bellabooty Exercise Hip Thrust Belt, Easy to Use with Dumbbells, Kettlebells, or Plates, Slip-Resistant Padding that Protects Your Hips for the Gym, Home Workouts, or On the Go

  • HIP THRUST ANYWHERe, ANY WEIGHT - At home, at the gym, or on the go, use our Bellabooty Belt for efficient and comfortable hip thrust exercises. Our portable hip thrust belt works for any level of user with a variety of weights up to 400 lbs..
  • COMFORTABLE, NO MORE SORE HIPS - The original Bellabooty Belt rests perfectly on your hips. Has a soft padding to protect your hips and a grip to keep the belt in place. No more sore hips with our booty workout equipment..
  • SAFE, EFFECTIVE, PATENTED DESIGN - Designed for natural balance, our hip thrust belt “hugs” your hips. Built with slip resistant padding, you no longer need to worry about the weight sliding and throwing you off balance providing you with better balance than a barbell.
  • EASY SET UP IN 20 SECONDS OR LESS - Bellabooty Belt for hip thrust sets up in 20 seconds or less. Simply loop the straps through or around whatever weights you are using and secure them in place. Close the booty belt and get ready for a great hip thrust workout..
  • SQUATS, PLANKS, LUNGES & MORE - Elevate your workout with the original Bellabooty Be....
Check Stock

Mardatt 24 pcs 3 Type Thrust Needle Roller Bearings with Washers, AXK3552, AXK2035, AXK2542 Chromium Steel Rollers for Automobiles, Pump, Machine Tools

  • 【3 Size Thrust Needle Roller Bearing Assortment】You will get 9 pcs 20*35*2MM thrust needle roller bearings with washers, 9 pcs 25*42*2MM thrust needle roller bearings with washers, 6 pcs 35*52*2MMthrust needle roller bearings with washers, totally 24 pcs..
  • 【Premium Material】Made of chromium steel featured with a nice load carrying capacity and stiffness, high hardness, and high precision, smooth surface no residual burr that smooth to touch. Heat treatment process makes the bearing ball stronger, avoiding to deformed for a long time..
  • 【Feature】Needle Roller Thrust Bearings can accommodate axial loads in one direction only. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Huge Function】Designed for low speed operation and axial loads only. Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise..
  • 【Wide Application】 Combined with 2 washers, make objects rotating smooth! Perfect for oven turntable, pump, rotating applications, motors, bikes, air conditioning, machine tools, automobiles, ect..
Check Stock

MOCHU 725 725C/P5 5x16x5 Angular Contact Ball Bearing, ABEC-5, 15° Contact Angle, Metric, 5mm ID, 16mm OD, 5mm Width, Single Row, Open

  • Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads.
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal axial internal clearance for applications where thermal expansion is not a factor.
Check Stock

Aeromax 700c Road Comp Silver Road Bike Wheelset Clincher

  • Wheels come with rim strips and skewers, Serviceable Vuelta Ball Bearing hubs,.
  • Hand Built Every wheel is stressed 3 times, Every spoke is tension tested with a DT Swiss Gauge.
  • Type-Road Color: Silver Normal quick release skewered hubs 24 spoke aero double wall alloy rims, machined sidewalls satin finish Type: Clincher, tubed.
  • Bearing type: Ball/Cone3 Stainless Steel Black aero 3.0mm spokes Patented spoke pattern Drilled for Presta valve Rim Width: 20mm (outer width) Rim Width: 13.7mm (inner width) Rim Height: 29.3mm Spacing: front 100mm, rear 130mm Weight: Front 1020g / Rear 1190g.
Check Stock