Categories

Best 2dodge Caravan Fuel Line

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
  • PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

Wetenex 1/4 Inch Fuel Line 6mm ID Fuel Line-5 Feet with 1/4 Fuel Filter + Fuel Line Clamps + Fuel Shut off Valve Switch

  • Fuel line: high temperature resistance, good corrosion resistance, long service life.
  • Fuel filter, 180 degree valve and clamp are fit for fuel line.
  • Package include: 5 feet fuel line, 2 fuel filter, 12 clamp, 2 fuel Shut off Valve.
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

OUFKAR 6pcs Fuel Line Disconnect Tool Compatible with Ford GM Mazda, Automotive AC Fuel Line Removal Tool Line Removal Tool Kit 5/16-7/8in

  • Function of Fuel Line Disconnect Tool: Master Deluxe AC line disconnect tool Fuel disconnect tool kit offers a wide range of tool sizes to separate oil / fuel lines, quick disconnects on heater lines and AC cooling lines,and it exactly the product needed for fuel filter replacement..
  • The Fuel Line Disconnect Tool is widely used:Compatible for most Ford, G.M, Mazd.a, and other vehicles with automatic transmission lines, strong compatibility.A must have tool if you work on vehicles.This product definitely made removing the gas lines off easier.
  • The Usability and Design of Fuel Line Disconnect Tool: Each refueling tool is color-coded by size for easy identification.
  • six sizes 1/2"-12.7mm (Yellow), 3/4"-19mm (Black), 3/8"-9.5mm (Blue), 5/8"-16mm (Green), 7/8"-22.2mm (Red), 5/16"-8mm (Copper), They are nicely colored so you can see what size they are if you're in a tight spot..
  • Exquisite Workmanship of Fuel Line Disconnect Tool: Each fuel line quick disconnect heater hose disconnect tool is made of hard plastic with high strength and long life, which can prevent rust and corrosion..
  • Easy to Use of Fuel Line Disconnect Tool: Fuel Line Disconnect spring end and unique offset design can enter the narrow or blocked area that is difficult to reach, and quickly sep....
Check Stock

EVIL ENERGY 6AN PTFE E85 Fuel Line Hose Nylon Braided 10FT Black(5/16 Inch ID)

  • ID: 5/16". OD: 0.465inch.Length: 10 feet. Please measure before purchase!.
  • PTFE fuel line can be used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc..
  • Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 3000 psi. Bursting Pressure: 10000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

EVIL ENERGY 8AN PTFE E85 Fuel Line Hose Nylon Braided 20FT Black(0.394 Inch ID)

  • ID: 13/32". OD: 0.543inch.Length: 20 feet(6M). Please measure before purchase!.
  • PTFE fuel line can be used as fuel injection hose, boost line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, fuel supply line, etc..
  • Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 2500 psi. Bursting Pressure: 8000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

Fuel Line Disconnect Tool Set Master Quick Disconnect Tool Kit for AC Fuel Line Transmission Oil Cooler Line Disconnects Compatible with Most Ford Chevy GM Models Red

  • [WIDELY USE AC & FUEL LINE DISCONNECT TOOL SET]-- A comprehensive disconnect tool set for separating automotive ac hose and fuel lines, work for almost fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action. Widely applied for domestic and foreign hoses and automotive lines, compatible with Most GM Ford Dodge Mazda and Chrysler..
  • [DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 6 pcs of color-coded ac disconnect fuel line removal tool set , 7 pcs of removing ac & fuel line disconnect fittings , 4 pcs of quick ac fuel line remover , 2 pcs of oil cooler line remover as well as scissor fuel line disconnect tool , cf fuel line w/hair pin connector and rubber band. Various common tools are easy for operation to cover different purposes..
  • [DURABLE MATERIAL & High Quality]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity..
  • [HANDY DESIGN & EASY STORAGE]--All most popular cooler line removers for for fuel and air conditioning lines are set in unique and organized locations in a blow-molded case for avoiding mispla....
Check Stock

Byredio 3/8 Fuel Line Braided 6AN 10ft Transmission Cooler Hose for Oil,Gas,Fuel,Hydraulic 350-1400 psi High Pressure & Tamper Resistant (8.71mm ID)

  • ✅HIGH QUALITY MATERIAL - The high pressure fuel line covered with high quality woven Nylon and 304 stainless steel braided + CPE synthetic rubber to enhance flexibility and give a cool racing appearance..
  • ✅NYLON BRAIDED - The braided fuel line can stand-104ºF to +302 ºF/-40ºC to +150ºC, 350 PSI Working Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect...
  • ✅WIDE APPLICATION - The 6an fuel line specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..
  • ✅CUT THE SIZE AS YOU WANT - The 6an fuel line is 10 Feet / 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..
Check Stock

KIPA 5/16\ Inch ID Fuel Line Set - 2 Meter / 6 Foot 5/16\ Inch Fuel Line + 4 Pcs 5/16 Inch Fuel Filters + 20 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines

  • ...te reinforcing layer, The inner and the outer pipe are made of fluoro elastomer and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance, petroleum-resistant nitrile tube with a covering that resists weathering, ozone ,heat and can be used for ethanol-laced fuels and diesel fuel. This fuel hose is SAE 30R9-rated that will withstand up to 120 psi and 300 degrees..
  • Fitment: includes 6 Feet 5/16" Fuel Line.
  • 4Pcs x 1/4 Inch & 5/16 Inch Fuel Filters.
  • 20 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. They could be used widely for update your fuel line system, such as outboard boat system, motorcycles, ATVs, UTVs, Go Kart, Auto Vehicle's. Fuel line kit could also be used widely on lawnmower, Generator, power equipment and small engines Tool Etc..
  • Perfect fuel filters, They could effectively Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor & Fuel pump & Fuel Tank, transmiss Steady clean fuel flows and keep engines Running at the top performance...
  • Hose Clamps: They are Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage, make your fuel lin....
Check Stock

Five Oceans FO2888 3/8 inches Barb Female Fuel Line Quick Connector for All Yamaha/Mercury Engine Connection and Original Mercury Fuel Tank Connection Before 1998

  • Compatible with Ethanol Blended Fuels - Engineered low permeation material which prevents fuel evaporation..
  • This Quick Connector was Designed for All Yamaha (Engine and Fuel Tank Connection) and All Mercury Engine Connection (Apply connector to Engine only). In Addition, will fit original mercury fuel tank connection before 1998..
  • Built with durable materials for marine environment..
  • Easy Installation with barbed fitting for 3/8 inches (Internal Diameter)..
  • Suitable for Boats, RVs, Tractors, and Caravan.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock