Categories

Best 2ton Shop Press

2T cable pulling swivel,cable grip puller for Wire Rope, Pulling4409Lb

  • 【Method of operation】：You slip the cable to be tensioned in from the side, The tool clamps onto the cable and the grip tightened as you pull on the loop end. The grip can slip if the cable is wet or coated with dirt or a lubricant, so it should be clean and operated when dry (not during or after a rain)..
  • 【Function】 - It can adjust the overhead power lines, which can solve the problem of sag and tight it..
  • 【High Quality】 - Made of high quality alloy steel, this clamp is durable, stable, and high strength..
  • 【Keep Safe】 - Due to the anti-chip safety device on the clamp mouth, this clamp can make the safety and no jumper. And the tong is smooth, which can reduce the damage to the lead..
  • 【Usage】 - This clamp fit for Cable from 5/32 - 7/8 Inch. With the 2Ton/4409 Lb of max safe load, it is suitable for all kinds of steel cables and cables.
Check Stock

Floor Jack,2 Ton Heavy Duty car jack,Lifting Range 5-1/8" to 13",Hydraulic Low Profile Trolley Service Floor Jack,4,000 lb Capacity,Blue(AA051)

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

Dulytek Retrofit Heat Caged Plate Kit 3 x 8 Anodized Aluminum Plates for 15-30 Ton Hydraulic or Air-Operated Shop Presses

  • 3" x 8" Dual Heating Insulated Plates For 15 - 30 Ton Hydraulic or Air-Operated Shop Press.
  • High Pressure Operation Makes Pressing At Lower Temperature To Obtain Pretty Good Consistency.
  • For Pairing with Powerful Hydraulic or Air-Operated Shop Presses.
  • Precise Two-Channel Digital Controller with Temperature & Press Timer and Magnetic Feet.
  • Fahrenheit and Celsius Temperature Scale Options.
  • Caged Plates (DHPK38), Control Unit, AC Power Cord and Operation Manual Enclosed.
Check Stock

Dulytek Retrofit Two Channel Heat Plate Kit 3 x 6 Anodized Aluminum Caged Plates Working with 10-20 Ton Hydraulic or Air-Operated Shop Presses

  • 3" x 6" Caged Two Channel Dual Heating Insulated Plates For 10 - 20 Ton Hydraulic or Air-Operated Shop Press.
  • High Pressure Operation Makes Pressing At Lower Temperature To Obtain Pretty Good Consistency.
  • Paired with Powerful Hydraulic or Air-Operated Shop Presses.
  • Digital Controller with Temperature & Press Timer.
  • Fahrenheit and Celsius Temperature Scale Options.
  • Caged Plates (DHPK36), Control Unit, AC Power Cord and Operation Manual Enclosed.
Check Stock

IMAYCC Scissor Jack for Car - 2 Ton (4409 lbs) Car Jack Kit with Saving Effort Ratchet Design,Car Tire Jack for Auto/SUV/MPV (2 Ton)

  • 【 LOAD CAPACITY 】Car Lifting Range from 3.9" (100mm) to 15.2"(385mm). Max Load weight: 2.0 Ton (4,409 lbs). Car Jack Net weight 4.84 lbs (2.2kg)..
  • 【 UPGRADED SCISSOR JACK 】Bi-directional mechanical Design , Both sides move up at the same time, 90% less effort required to lift your vehicle and 2 times lifting speed compared with others..
  • 【 MORE STABLE & DURABLE 】Thicken and Enlarged base plate ensures a secure footing, Reinforced Rolled edges and made of Heavy-duty steel can withstands high pressure..
  • 【 UNIVERSAL CAR JACK 】Portable Scissor jack 2Ton Suitable for most vehicle: Sedan, Coupe, SUV, MPV, Hatchback, Crossover, Wagon and More.a good tire change kit for your vehicle..
  • You can also get a 1 year worry-free after-sale service( free exchange or 100% refund if product was defective as quality problems ).
Check Stock

DREAMVAN Pro 8 in 1 Heat Press Machine Combo T Shirt Pressing Machine 15x12Multifunctional 360°Rotation Swing Printing Sublimation Heat Press Transfer Machine for T-Shirt Hat Cap Mug Plate

  • ➤DREAMVAN HOME HEAT PRESS,LCD DIGITAL CONTROL - The heat press machine features a digital temperature gauge ranging from 0 - 250°C (up to 482°F）, Dual Integrated Digital LED display with controller allows you to pre-set temperature and timer countdown.Sound alarm will be issued when time completed.Dissipate heat and automatically shut off when overheat.
  • ➤360 DEGREE ROTATION - Full 360-degree Rotation of Swing-away Design.This heat press adopts rotatable and guide rail design, which can directly and evenly provide a full range of presses to ensure the quality of the finished transfer.
  • ➤8-IN-1 SET, DUAL-TUBE HEATING - The top platen's floatation feature allows it to adjust its angle of attack for even contact., The tshirt press machine will always apply the same amount of heat and pressure with every press.The heat press employs a swingable and guide rail design.
  • ➤QUICK SUBLIMATION, POWERFUL FUNCTION - Our Heat Press Machine helps to direct pressure straight down and apply pressure evenly, thus the quality of the finished transfers can be improved a lot, perfect for T-shirts, caps, ceramic plates, ceramic til....
Check Stock

DREAMVAN Pro 8 in 1 Heat Press Machine Combo T Shirt Pressing Machine 15x12Multifunctional 360°Rotation Swing Printing Sublimation Heat Press Transfer Machine for T-Shirt Hat Cap Mug Plate

  • ➤UPGRADED VERSION,LCD DIGITAL CONTROL - The heat press machine features a digital temperature gauge ranging from 0 - 250°C (up to 482°F）, Dual Integrated Digital LED display with controller allows you to pre-set temperature and timer countdown.Sound alarm will be issued when time completed.Dissipate heat and automatically shut off when overheat.
  • ➤360 DEGREE ROTATION - Full 360-degree Rotation of Swing-away Design.This heat press adopts rotatable and guide rail design, which can directly and evenly provide a full range of presses to ensure the quality of the finished transfer.
  • ➤8-IN-1 SET, DUAL-TUBE HEATING - The top platen's floatation feature allows it to adjust its angle of attack for even contact., The tshirt press machine will always apply the same amount of heat and pressure with every press.The heat press employs a swingable and guide rail design.
  • ➤QUICK SUBLIMATION, POWERFUL FUNCTION - Our Heat Press Machine helps to direct pressure straight down and apply pressure evenly, thus the quality of the finished transfers can be improved a lot, perfect for T-shirts, caps, mugs,mouse pads,lettering, other mi....
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

DREAMVAN Pro 5 in 1 Heat Press Machine Combo T Shirt Pressing Machine 15x12Multifunctional 360°Rotation Swing Printing Sublimation Heat Press Transfer Machine for T-Shirt Hat Cap Mug Plate

  • ➤CLASSIC VERSION,LCD DIGITAL CONTROL - The heat press machine features a digital temperature gauge ranging from 0 - 250°C (up to 482°F）, Dual Integrated Digital LED display with controller allows you to pre-set temperature and timer countdown.Sound alarm will be issued when time completed.Dissipate heat and automatically shut off when overheat.
  • ➤360 DEGREE ROTATION - Full 360-degree Rotation of Swing-away Design.This heat press adopts rotatable and guide rail design, which can directly and evenly provide a full range of presses to ensure the quality of the finished transfer.
  • ➤5-IN-1 SET, DUAL-TUBE HEATING - The top platen's floatation feature allows it to adjust its angle of attack for even contact., The tshirt press machine will always apply the same amount of heat and pressure with every press.The heat press employs a swingable and guide rail design.
  • ➤QUICK SUBLIMATION, POWERFUL FUNCTION - Our Heat Press Machine helps to direct pressure straight down and apply pressure evenly, thus the quality of the finished transfers can be improved a lot, perfect for T-shirts, caps, ceramic plates, ceramic tiles, mugs,....
Check Stock

Moongiantgo Commercial Manual Juicer Hand Press Citrus Juicer Extractor Pomegranate Orange Lime Lemon Squeezer Fruit Juicer Machine

  • Professional Citrus Juicer - Manual Fruit Juice Squeezing, Retain the Original Taste & Nutrition. Suitable for squeezing soft fruits such as grape,....
  • NOT APPLICABLE MATERIALS - Do Not Squeeze 1. Hard fruits: apples /sugar cane. 2. Fruits with less water content: carrot 3. Fruits that are not easy to....
  • Stainless Steel Fruits Contact Part - The Press Cover & Filter & Funnel is made of 304 Stainless Steel, meets food safety requirements. And the....
  • Thickened Base & Labor-Saving Design - Our Hand Press is heavy and stable, when pressing the fruit, just put the fruit in the proper position, hold....
  • Get Your Vitamin C from Healthy Juice, Great Squeezing Tool of Home, Hotel, Bar, Fruit shop, Drink shop. etc! - We provide ONE YEAR WARRANTY and....
Check Stock

Stainless Steel Funnel Octopus Balls Tools With Handle & Rack, Pancake Batter Dispenser, Waffle Batter Dispenser, Pancake Maker Cooking Tools

  • This Stainless Steel Funnel can be apply to the modern hotel kitchen, cake shop, bakery, soda fountain, fruit juice shop, high-end villa, modern home kitchen and so on..
  • Automatic springback with spring built-in which can control flow to meet different needs..
  • Quite easy to operate. When you press the handle slightly, the slurry flows out of the funnel, when you loosen your finger, the slurry stops flowing..
  • It is essential for your baking, delicious dishes and desserts. Suitable for modern hotel kitchen, cake shop, bakery, soda fountain, juice shop and so on. With rack supplement, you can place it easily and keep your kitchen tidy..
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions..
Check Stock

OTC 1893 V-Block Accessory Fixture for 100-Ton Capacity Shop Presses - Pair

  • V-Block Accessory Fixture for 100-Ton Capacity Shop Presses - Pair.
  • Use to support axles, bars, and other hard to hold components.
  • For use with OTC shop press model numbers 1850, 1857, and 1865.
  • Super strong, extra thick, steel construction - each 14 inch long fixture weighs over 25 lbs..
  • Durable powder coating resists rust and corrosion.
Check Stock

SWAG Off Road 20 TON Finger Brake Heavy Duty DIY Builder Kit

  • Attach to Most Standard 12-Ton or 20-Ton Hydraulic Shop....
  • Upper Die Mounting Cup Inside Diameter: 41....
  • Overall Dimensions: 14.50 in. Wide x 7.50 in. Deep x 9.25 in. High JEGS 81492 Press Break Attachment for 12-Ton or 20-Ton hydraulic shop presses makes....
  • Bends mild steel and aluminum with a maximum width of 12 in. and thickness of 3/8....
Check Stock