Categories

Best 2wrx Up Pipe Gasket

Oatey 42239 Brass and Plastic No-Calk Shower Drain Wrench, Stainless Steel

  • Compression gasket tightens around 2″ Sch. 40 DWV pipe with caulking nut and wrench.
  • Can be used with 15″ Sch. 40 DWV pipe and 15″ or 2″ Copper DWV pipe when caulking gasket is replaced.
  • Available with 425″ Stainless Steel or UltraShine PVD Polished Brass Snap-Tite Strainer.
Check Stock

Deflecto Dryer Vent Hood, 4\

  • Includes 2 hooker upper protectors, 1 semi-rigid aluminum duct and 1 gasket.
  • Duct twists on hooker upper protectors and slides over dryer vent and outlet pipe.
  • Protects duct from being smashed behind dryer which can cause unsafe dryer operation and longer drying times.
  • No clamps, no tools, no tape. Gasket may be needed for proper fit on some dryers.
Check Stock

Deflecto Vent Hood, 4\

  • Includes 2 hooker upper protectors, 1 semi-rigid aluminum duct and 1 gasket.
  • Duct twists on hooker upper protectors and slides over dryer vent and outlet pipe.
  • Protects duct from being smashed behind dryer which can cause unsafe dryer operation and longer drying times.
  • No clamps, no tools, no tape. Gasket may be needed for proper fit on some dryers.
Check Stock

FULL Hotparts Turbo T4 Kit Vortec V8 LS 4.8 5.3 6.0 6.2 Silverado Sierra LSX 3"

  • 2" 304 SS heavy duty bellows | Turbo Installation Kit Included | Up-Pipe to Y-Pipe Gasket Included | Y-pipe to Turbo Clamp Included.
  • 3 Year unlimited mileage warranty | Polished Stainless Tubular Construction | Precision Built For Long-Lasting Performance.
  • Compatible with 2003-2007 6.0L Powerstroke Diesel.
Check Stock

BBR Motorsports 120cc Big Bore Kit with Cam 411-HXR-1001

  • Specification: This is a complete one piece exhaust system from the head pipe to the tail section. This will make your bike breath with any engine....
  • Fitment: Fit Honda CRF50 XR50 CRF50F (not fit Honda other modle). And Their Copies 70cc-125cc Bikes, Such As....
  • Size: Removable pipe guard 28mm head, 45mm eye to eye.
  • Package Contents: 1 x Exhaust Muffler， 1 x Exhaust head pipe， 1 x metal clip， 1 x Black rubber gasket， 2 x gasket， 1 x Screw kit.
  • Note: Please check carefully the item pictures, model and size before purchasing. Or leave us messages for assistance if you are not sure about the....
Check Stock

FMF Turbinecore 2 Spark Arrestor Silencer - 2-Stroke for 03-17 KTM 85SX

  • 【Fitment】Fit Honda CRF50 XR50 CRF50F (not fit Honda other modle). And Their Copies 70cc-125cc Bikes From China, Such As Chinese Made CRF50,XR50,SSR,YCF,IMR,Atomik,x-pro,Baja,Motovox,TTR,Thumpstar,BSE,Apollo,Kayo,Stomp,Piranha,DHZ,GPX,Pitster Pro,SDG,Braaap,Taotao,Coolster,Roketa,Lifan,YX,Ect And Many Other Chinese Brands..
  • 【Specification】This is a complete one piece exhaust system from the head pipe to the tail section. This will make your bike breath with any engine modifications, and also sounds great with a stock bike.This PIPE makes your mini have that deep sound like the big CRF's and gives your mini better.
  • 【Size】Removable pipe guard 28mm head, 45mm eye to eye.
  • 【Package Contents:】 1 x Exhaust Muffler， 1 x Exhaust head pipe， 1 x metal clip， 1 x Black rubber gasket， 2 x gasket， 1 x Screw kit.
  • 【Note】Please check carefully the item pictures, model and size before purchasing. Or leave us messages for assistance if you are not sure about the fitment..
Check Stock

Dasen Steel Mesh Style Crush Seal Exhaust Port Gasket Kits Compatible with 1984-2022 Harley Big Twin and Sportster XL

  • Package Included:10 pcs Exhaust Pipe Gasket.
  • Fitment:ATV Quad Exhaust Pipe Gasket ID 30mm OD 38mm Fit Pit Dirt Motorcycle 200cc 250cc.
  • Please Check The Pictures Carefully Before Your Purchase.
  • Shipped From China, Arrival Within 7-15 Business Days.
Check Stock

BADASS SHARKS 22mm Motorcycle Exhaust Muffler Pipe System For Motorcycle Street Dirt Bike Pipe Silencer Racing

  • 【Fitment】Fit Honda CRF50 XR50 CRF50F (not fit Honda other modle). And Their Copies 70cc-125cc Bikes From China, Such As Chinese Made CRF50,XR50,SSR,YCF,IMR,Atomik,x-pro,Baja,Motovox,TTR,Thumpstar,BSE,Apollo,Kayo,Stomp,Piranha,DHZ,GPX,Pitster Pro,SDG,Braaap,Taotao,Coolster,Roketa,Lifan,YX,Ect And Many Other Chinese Brands..
  • 【Specification】This is a complete one piece exhaust system from the head pipe to the tail section. This will make your bike breath with any engine modifications, and also sounds great with a stock bike.This PIPE makes your mini have that deep sound like the big CRF's and gives your mini better.
  • 【Size】Removable pipe guard 28mm head, 45mm eye to eye.
  • 【Package Contents:】 1 x Exhaust Muffler， 1 x Exhaust head pipe， 1 x metal clip， 1 x Black rubber gasket， 2 x gasket， 1 x Screw kit。.
  • 【Note】Please check carefully the item pictures, model and size before purchasing. Or leave us messages for assistance if you are not sure about the fitment..
Check Stock

Micro Trader 2pcs Toilet Top Cover Lid Seat Fixings WC Blind Hole Fitting Black Screws Nut

  • Use as a replacement flange for broken toilet flanges.
  • Compression joint provides up to 3 in. of adjustment to the riser.
  • Slides inside 4 in. cast iron or PVC Sch. 40 DWV pipe.
  • Rubber compression gasket enables the toilet flange to be used on many types of cast iron piping.
  • 3 stainless steel bolts tighten to compress the rubber gasket, securing the flange to the existing piping.
Check Stock

FEL-PRO MS 96696 Intake Manifold Gasket Set

  • A leaking valve cover can be dangerous. The smoke and vapor from the oil burning as it hits a hot exhaust manifold can enter the cabin of the boat. So it is important to install a quality valve cover gasket - GOHAWKTEQ.
  • Replaces# Fel-Pro VS50504R-1, includes 2 gasket, 8 grommet and 1 piece exhaust air pipe flange gasket..
  • Application: Silverado 1500 2500 3500, GMC Sierra 1500 2500 3500,,Buick and more vehicles please check the Part Finder or Product Description.
  • Tips for replacing: 1. Using Spray Adhesive to seal the gaseket on the valve cover and not go anywhere. 2. Using RTV Silicone Gasket Maker to hold the high edge of gasket in position and inside the cover edge.3. Don't scar the valve cover surface when carving the debris.A soft brush can be affective in removing debris..
  • Warranty: This fValve Cover Gasket comes with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If the gasket has any problem, just send us a picture, and we will ship a replacement to you!.
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

ohhunt QD 1 inch 30mm Rings Integral Hunting 30mm Scope Mount Picatinny Rail for Optical Sight with Bubble Level

  • Precision Machined from Aircraft-grade Aluminum Alloy.
  • Robust and User Friendly Ergonomic Quick Detach Lever Fully Adjustable to Fit on Any Picatinny Rail.
  • Bidirectional Design to Offer Needed Offset in Diverse Applications.
  • After installing the gasket, it can be used in the Scope of 25.4mm pipe diameter,After removing the gasket, it can be used in the Scope of 30mm pipe....
Check Stock

Jackson Safety Pipe Measure Tool, Wrap-Around Tape, Flex Angle Measuring, Marking Gauge 3” to 6” Diameter, Medium, Black, 14752

  • PREMIUM PIPE MEASURER – Easy to use marking tool designed for pipe fitters and welders as economical measuring tape tool for marking straight lines around pipes, enabeling superior precision at all times.
  • HEAT RESISTANT MATERIAL – Comes in black and made from a flexible gasket material with resistance to both low or high temperatures up to 350º Fahrenheit.
  • PRINTED SCALES – Tape printed with a scale in inches, and features an inch chart, tangent chart, and other helpful markings to assist you in making straight lines around pipes.
  • DIAMETER RANGE – Flexible pipe angle measuring tool has a marking scale from 3 88" to 4'.
  • magnetic marker holder designed to gauge pipe diameters that are sized 3" to 6".
  • SAFETY STANDARDS – Unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.
Check Stock