Categories

Best 3 0 Tft Display

BIGTREETECH TFT35 V3.0 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR V1.3 SKR PRO Board for 3D Printer Part

  • ❤【32 Bit High Performance Microprocessor】TFT35 V3.0 touch screen uses 32 bit ARM level Cortex-M3 series STM32F207VCT6,120MHz frequency....
  • ❤【Two Working Modes】TFT35 V3.0 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode....
  • ❤【12864LCD Mode】The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is....
  • ❤【More Extension Ports is Reserved】 TFT35 V3.0 display reserve the extension port of filament break detection ,automatic shutdown after....
  • ❤【Firmware Update】 It is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must....
Check Stock

Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock

PalmOne Tungsten T3 Handheld

  • Operating System - Microsoft Windows Mobile 6 ( Pocket PC ).
  • Display - 3.5" Brilliant TFT LCD 65k full-colors, 16-bit display QVGA, 240x320 resolution with touch screen (anti-glare).
  • Memory - 256MB Flash ROM and 64 MBBluetooth v2.0(EDR) / SIR 115.2kbps (max) / USB 1.1/ WiFi 802.11b+g.
  • Expansion Slot - 1 x SD slot (SDIO/SD/MMC ) up to 4GBIntegrated microphone and speakerFull duplex record and playback1 x 3.5mm earphone jack and MP3 stereo.
Check Stock

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

  • ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
  • ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
  • You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
  • ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..
Check Stock

DIYmall Mini PiTFT 1.3″ LCD Display 240×240 TFT Add-on for Raspberry Pi 3.3V SPI ST7789 3.3V SPI ST7789 Full Color

  • TFT size： 1.3″ diagonal, Voltage：3.3V, Interface：SPI, Driver: ST7789, Color：Full color.
  • The Mini Pi TFT 1.3 ” – 240×240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi , to give you a little display..
  • The Mini Pi TFT comes with a full color 240×240 pixel IPS display with great visibility at all angles..
  • The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case..
Check Stock

DIYmall Mini PiTFT 1.3″ LCD Display 240×240 TFT Add-on for Raspberry Pi 3.3V SPI ST7789 3.3V SPI ST7789 Full Color(Pack of 2PCS)

  • TFT size： 1.3″ diagonal, Voltage：3.3V, Interface：SPI, Driver: ST7789, Color：Full color.
  • The Mini Pi TFT 1.3 ” – 240×240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi , to give you a little display..
  • The Mini Pi TFT comes with a full color 240×240 pixel IPS display with great visibility at all angles..
  • The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case..
Check Stock

Hantek1832C Handeld 40kHz LCR Meter with Carry Case, 0.6Vrms

  • 100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz test frequency, 0.6 Vrms test level, 0.30% accuracy.
  • Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR.
  • 4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead.
  • Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R).
  • reset function: open/short circuit calibration.
  • 2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs.
Check Stock

Ferrofish B4000+ Hammond B3 organ

  • Hardware Features: 9 drawbars, 6 high resolution metal dials, TFT color display.
  • Organ Emulation Features: 3 full polyphony manuals, Percussion (including harmonic, attack, decay), Tonewheel emulation (including leakage and condition), Mechanical emulation including keyclick and key contact delay simulation.
Check Stock

Hantek1833C Handeld 100kHz LCR Meter with Carry Case, 0.3/0.6 Vrms

  • 100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz/50kHz/75kHz/100kHz test frequency, 0.3/0.6 Vrms test level, 0.30% accuracy.
  • Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR.
  • 4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead.
  • Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R).
  • reset function: open/short circuit calibration.
  • 2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs.
Check Stock

BW 3.5 Inch TFT LCD Monitor for Car / Automobile

  • Brand New and High quality. Portable 3.5.
  • Wide view angle, low illumination. D/N models with photo-sensor. Distance reference marking display. Easy installation..
  • Screen Size: 3.5 inch. Ratio: 4:3 TFT screen. Power Supply: DC 12V..
  • Visible Area: 72mm x 53mm. Power Consumption: 2W. Operating Temperature: 0°C ~ +80°C. Storage Temperature: -10°C ~ +80°C..
  • Video: 2-channel video input. Dimensions: 93 x 80 x 20mm (LxWxH)..
Check Stock

CEM DT-9851M Particle Counter with TFT Color LCD Display

  • 2.8" TFT 320x240 pixels Color LCD display..
  • Simultaneously measure and display 3 channel of particle sizes, measure particle size down to 0.3 μm & Mass Concentration..
  • Air temperature and humidity, Dewpoint & Wet bulb temperature.Max, Min, DIF, AVG record, Date/time setup controls, alarm..
  • MicroSD (MAX. use 8GB) memory card, USB interface.Selectable sample time, count data, programmable delay..
  • Store 5000 records of date, time, counts, relative humidity, temperature, sample volumes, alarms and location label..
Check Stock

BK Precision 891 - Benchtop LCR Meter 300 kHz

  • Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 40kHz, 100KHz.
  • Large capacity lithium battery power supply.
  • Supporting DC Resistance and Electrolytic Capacitance Measurement.
  • Automatic Recognition of Component Measurement.
  • Support screening and deviation measurement.
  • 2.8-inch TFT display, 4-bit semi-display.
  • Display digit: Main parameters: 5 bits, secondary parameters: 5 bits.
  • Adjustable measuring speed, manual and automatic range.
  • Short circuit correction with open circuit.
  • Standard configuration:1. Mini-USB cable.
  • Adjustment of backlight brightness, Chinese and English are optional,USB device and automatic power-off time.
Check Stock