BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3 with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

BW 3.5 Inch TFT LCD Monitor for Car / Automobile

  • Brand New and High quality. Portable 3.5.
  • Wide view angle, low illumination. D/N models with photo-sensor. Distance reference marking display. Easy installation..
  • Screen Size: 3.5 inch. Ratio: 4:3 TFT screen. Power Supply: DC 12V..
  • Visible Area: 72mm x 53mm. Power Consumption: 2W. Operating Temperature: 0°C ~ +80°C. Storage Temperature: -10°C ~ +80°C..
  • Video: 2-channel video input. Dimensions: 93 x 80 x 20mm (LxWxH)..
Check Stock

Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

Freeda Biotin 10000 mcg - Kosher Biotin 10000mcg Hair Skin and Nails Vitamins for Hair Growth - Biotin Pills Hair Growth Vitamins B7 - Superior Biotin Supplement Hair Vitamins for Women & Men (100 Ct)

  • TRIPLE-LAYER PROTECTION - The best protection for your 4. 7 inch iPhone 6S. Period! Constructed out of a "no stretch" soft TPU case + extra hard polycarbonate back plate + crystal clear HD TFT screen protector. Your iPhone will be protected from all angles..
  • 4 SILICONE SHOCK ABSORBERS - Say goodbye to the good old air cushion! Our unique silicone shock absorbing technology integrated into each corner of the case s maximum shock protection..
  • FRONT AND REAR PROTECTION - Don't expect any less! The beveled edge on the front of the iPhone 6 case provides a 0. 9 mm lip when laying on a table. The 4 raised edges with a maximum height of 0. 8 mm protect the back of the case.
  • EASY ACCESS PORTS - Ensures ultimate connectivity. Extra large openings allow easy access to all ports, buttons, and camera. Compatible with most battery chargers and earphone jacks..
  • INCLUDED AT NO EXTRA COST! THE ORIGINAL HD TFT SCREEN GUARD - This high quality screen protector ($10 value) provides full protection for your iPhone screen and is included at no extra cost! Fabricated from premium quality material made in Japan, the high-transparency HD TFT screen protector provides ultimate scratch and impact resistance..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

  • ⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
  • ⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
  • ⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
  • ⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
  • ⭐【Satisfying After-Sales Support】If you have ....
Check Stock

Leica D-Lux 4 Digital Camera (Black) (Discontinued by Manufacturer)

  • 10.1-megapixel resolution and 24-60 Summicron lens f2.0.
  • Small, compact design with 3.0-inch TFT LCD screen.
  • capture images to SD memory card, SDHC memory card and MultiMedia cards (not included).
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

  • ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
  • ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
  • You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
  • ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..
Check Stock

American Diagnostic Corporation Acoustic Adscope Digital Stethoscope Metallic Gray

  • BUY ONE, GET TWO SENSORS: Elitech IR-200 comes with both the infrared sensor and the heated dioded sensor. Quick switch between two sensors, ensures high accuracy and maximum of 10 years sensor life.  It triggers all halogenated refrigerants much more precisely than the traditional corona sensor and single heat-diode sensor..
  • SELECTED SENSITIVITY: 3 Selectable Sensitivity Levels -High/Medium/Low.
  • 1000 levels of heating diode automatic adjustment. With a maximum sensitivity up to 0.14oz/yr, 4g/yr..
  • TFT SCREEN: The world's first TFT screen advanced leak detector animates leakage, sensitivity, battery levels and sensor faulty indicators and presents more clear and easy readings..
  • RESET SENS: Press the “Reset SENS” button in the clean environment to increase the sensitivity when the sensitivity is not enough.
  • press the button to reduce sensitivity when the sensitivity is out of scale..
  • FREE RETURN OR EXCHANGE WITHIN 3 MONTHS: It meets EN14624, SAE-162, SAE-2791 and SAE-2913 standards. 24/7 US Technician Support via Email and Phone..
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

Arcade Racing Legends Dreamcast

  • ...ames On GV300S Console - Built-in 308 Classic video games on the GV300S console make you back to happy time. Relax from busy day. 6 Kinds of games bring different experience to you and your family & friend..
  • 3.0 Inch TFT Games Console & TV Connection - 3.0 Inch TFT Screen games console let you play anytime and anywhere. AV cable included support plug and play games freely on big TV screen..
  • Handheld Gamepad & Two-Player Mode - Handheld controller included lets you play games without restrictions. This games controller is powered by 2*AAA battery, not included in the package, please prepare AAA batteries in advance. NOTE: This retro games console also support two players, but you need to purchase additional gamespad if you want to play with your family or friends together. Get double happiness with another controller..
  • Power of GV300S Video Games Console - This retro games console is built-in a rechargeable Li-ion battery, charged by USB cable..
  • Exquisite Xmas Gift for Kids Adults - Classic mini TV style console not only can be as a games console entertainment, but ....
Check Stock

NEXTION 7 inch Enhanced NX8048K070-011C HMI Touch Screen LCD Display Pannel 800x480 with Enclosure Case for Arduino Raspberry Pi (Capacitive)

  • Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or device, it is the best solution to replace traditional LCD and LED. Replace the Nixie tube. It is mainly used in the Internet of Things (IoT) or consumer electronics..
  • Nextion consists of a hardware part (a series of TFT cards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port for communication. Save users the hassle of wiring. It is easy to adapt the Nextion family HMI to existing projects. Users just need to provide it with a UART..
  • You can power Nextion 3.5 from the 5V pin on the microcontroller, but this is not recommended. Working with insufficient power can damage the screen, so please use the power board that comes with nextion. See the image for use..
  • NX4832T035 is a powerful 3.5 inch HMI. Features include: 3.5 inch 480 x 320 TFT resistive touchscreen display, 16MB Flash, 2KB RAM, 65,000 colors. Viewing area: 73.44mm (L) × 48.96mm (W).
  • Uploading a TFT file via an SD card is faster than a 4-pin serial connection, but the credit card is in FAT32 format and does not exceed 32GB..
Check Stock

BIGTREETECH Smart Filament Sensor Filament Break Detection Module 3D Printer Parts for 1.75mm Filament SKR V1.3 Mini E3 GEN V1.4

  • 1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening..
  • 2) It can detect that the consumables such as consumables are broken and the consumables are not used..
  • 3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C language development, low development threshold..
  • 4) Support the motherboard with the break detection interface..
  • 5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode)..
Check Stock