Categories

Best 3 0 tft Mp5

BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer

  • ...pearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen..
  • ❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk..
  • ❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port..
  • ❤【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated..
  • ❤【Quality Warranty 】TFT35 E3 V3.0.1 touch screen is designed and produced by BIGTREETECH team,any qu....
Check Stock

Vinkich 11.1V Airsoft Battery 1400mAh 30C Rechargeable Lipo Battery 3S Balance Charger and Lipo Safe Bag with Mini Tamiya Connector for Airsoft Guns Aifsoft Rifle

  • 【11.1V Airsoft Battery Specification】1400mAh 3S lipo battery dimension is: Dimensions: 3.97" * 0.78" * 0.59"(101 * 20 * 15mm).
  • 【Balance Charger】Parameter: 3S charger, AC100-240V input, max charge current: 3*1000mA.Each cell is charged by independent line, which make sure....
  • 【Application】 1400mAh 3S RC battery fit for airsoft guns like M4, Crane Stock, M110, SR25, AK47, MP5K, MP5, SCAR, M249, M240B, M60, G36, M14, RPK,....
  • 【LiPo Battery Bag】100% inner fireproof fiberglass fabric, interlayer non-woven fabric with flame retardant effect, and PVC fiber outer layer,....
  • 【Lipo battery with Mini Taymiya】- The airsoft lipo pack with Mini Tamiya connector offers more power at a significant reduction battery size and....
Check Stock

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3 with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

Zeee 7.4V 25C 1300mAh Airsoft Lipo Battery 2S Stick Battery with Mini Tamiya Connector for Airsoft Guns Rifle

  • 【Zeee 2S Airsoft Battery Specification】- Battery voltage: 7.4V.
  • 【Dimensions】- Zeee 1300mAh 2S lipo battery dimension is: 126*20.5*13mm/4.96*0.8*0.5inch(L*W*H).
  • 【Application】 - Zeee 1300mAh 2S RC stick battery compatible with airsoft guns like M4, Crane Stock, M110, SR25, AK47, MP5K, MP5, SCAR, M249, M240B, M60, G36, M14, RPK, PKM, L85, Crane Stock, M110, SR25, etc(Only if the voltage, dimension and the plug match, then it will fit)..
  • 【Zeee Airsoft Lipo Battery】- 7.4V 25C 1300mAh Stick Battery provide your guns a long cycle life and longer runtime for enjoyment. Please kindly make sure whether the voltage is between 3.2~4.2V before using..
  • 【What You Get】- 1 Pack Zeee 1300mAh 2S Airsoft Battery with Mini Tamiya connector. Please enter "YOUR ORDER" to contact us directly if you have any problems with our product, we will reply you within 24 hours.
Check Stock

GOLDBAT 2S 7.4V 20C 1300mAh Airsoft Lipo Battery 2S Stick Battery with Mini Tamiya Connector for Airsoft Guns Rifle AK47 MP5K MP5 Scar M249 AUG AEG

  • 【Application】- Fit models like AK series, AK47, MP5k, MP5, Scar M249 AUG AEG. (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【Specification】- Battery voltage: 7.4V.
  • 【Notice】- Don't over charge more than 4.2V and don’t over discharge below 3.2V..
  • 【AFTER-SALES】- Please contact us immediately if you have any problems, we will reply you within 24 hours..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

  • ⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
  • ⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
  • ⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
  • ⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
  • ⭐【Satisfying After-Sales Support】If you have ....
Check Stock

Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

BESWON 2 Packs Airsoft Battery 11.1V Rechargeable 1600mAh 30C Lipo Battery Pack with 2S-3S Balance Charger for Airsoft Guns Rifle

  • 【 Airsoft Lipo Battery】11.1V 30C 1600mAh lipo Battery provide your guns a long cycle life and longer runtime for enjoyment. Please kindly make sure whether the voltage is between 3.2~6.4V before using..
  • 【 2S-3S Balance Charger】Smart lipo battery charger for 2S 3S/7.4V 11.1V lipo airsoft gun battery. Input voltage: 100-240V AC, output current: 800mA. Each cell is charged by independent line, and the LED indicator showing charging status: Red-charging, Green-fully charged..
  • 【Application】 1600mAh 3S RC battery fit for airsoft guns like M4, Crane Stock, M110, SR25, AK47, MP5K, MP5, SCAR, M249, M240B, M60, G36, M14, RPK, PKM, L85, Crane Stock, M110, SR25, etc(Only if the voltage, dimension and the plug match, then it will fit)..
  • 【Dimensions】1600mAh 3S lipo battery dimension is: Dimensions: 3.97" * 0.78" * 0.59"(101 * 20 * 15mm).
  • 【Lipo battery with Mini Taymiya】- The airsoft lipo pack with Mini Tamiya connector offers more power at a significant reduction battery size and number of battery cells.
Check Stock

Woltechz 2Packs 11.1V Airsoft Battery 1600mAh 30C Rechargeable Lipo Battery 2S-3S Balance Charger/Lipo Safe Bag with Mini Tamiya Connector for Airsoft Guns Aifsoft Rifle

  • 11.1V Airsoft Battery Specification: 1600mAh 3S lipo battery dimension is: Dimensions: 3.97" * 0.78" * 0.59"(101 * 20 * 15mm).
  • Smart airsoft lipo battery charger for 2S 3S/7.4V 11.1V lipo airsoft gun battery.Input voltage:100 -240V AC,output current:800mA..
  • Balance charger: Each cell is charged by independent line,to make sure each cell is fully charged. LED indicator showing....
  • Application: 1400mAh 3S RC battery fit for airsoft guns like M4, Crane Stock, M110, SR25, AK47, MP5K, MP5, SCAR, M249, M240B, M60, G36, M14, RPK, PKM,....
  • LiPo Battery Bag: 100% inner fireproof fiberglass fabric, interlayer non-woven fabric with flame retardant effect, and PVC fiber outer layer, which....
Check Stock

BIGTREETECH TFT35 V3.0 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR V1.3 SKR PRO Board for 3D Printer Part

  • ❤【32 Bit High Performance Microprocessor】TFT35 V3.0 touch screen uses 32 bit ARM level Cortex-M3 series STM32F207VCT6,120MHz frequency....
  • ❤【Two Working Modes】TFT35 V3.0 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode....
  • ❤【12864LCD Mode】The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is....
  • ❤【More Extension Ports is Reserved】 TFT35 V3.0 display reserve the extension port of filament break detection ,automatic shutdown after....
  • ❤【Firmware Update】 It is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must....
Check Stock

Electric Gel Water Ball Blaster Toy for Outdoor Activities Shooting Team Game, Christmas Toy Gifts for Adult Kids Ages 3+ (Black & Orange)

  • 2022 New Electric Splatter Ball Blaster Toy (MP5 3.0) : We use high-quality materials to upgrade this electric Splatter ball blaster toy. The core is to make the gearbox inside faster and more powerful, and the performance in all aspects has been doubled. It effective range 70 feet and it can fire 8 bullets per second. I believe you can experience more fun from it..
  • Wonderful Fully Automatic Shooting Team Game: use Coriardo automatic splatter balls blaster MP5 for a wonderful battle, you will have a lot of fun, and we use eco-friendly gel beads (diameter 7-8mm), it has unlimited water gel ball, bring you unlimited fun,the playability is very high..
  • Safe and Eco-Friendly Gel Beads (Unlimited): We configure soft gel beads. The gel beads is smooth and brittle after absorbing water, and will not damage the object. We recommend that the gel balls should be soaked in water for 3-4 hours before use. The package contains 20,000+ gel beads, using a high-capacity magazine, which can hold 1000+ gel beads at a time for endless fun..
  • User Manual (Safety Instructions): Please wear goggles when using the electric splatter blaster toy, and do not shoot at the opponent's head when playing combat shooting games, suitable for children 12 years old and above.It charge for ....
Check Stock

Coriardo Gel Splatter Ball Blaster MP5 with Goggles and 20,000+ Gel Beads Suitable for Backyard Fun and Outdoor Team Shooting Games, Over 12+, Blue(Upgraded Version 3.0)

  • 2022 New Electric Splatter Ball Blaster Toy (MP5 3.0) : We use high-quality materials to upgrade this electric Splatter ball blaster toy. The core is to make the gearbox inside faster and more powerful, and the performance in all aspects has been doubled. It effective range 70 feet and it can fire 8 bullets per second. I believe you can experience more fun from it..
  • Wonderful Fully Automatic Shooting Team Game: use Coriardo automatic splatter balls blaster MP5 for a wonderful battle, you will have a lot of fun, and we use eco-friendly gel beads (diameter 7-8mm), it has unlimited water gel ball, bring you unlimited fun,the playability is very high..
  • Safe and Eco-Friendly Gel Beads (Unlimited): We configure soft gel beads. The gel beads is smooth and brittle after absorbing water, and will not damage the object. We recommend that the gel balls should be soaked in water for 3-4 hours before use. The package contains 20,000+ gel beads, using a high-capacity magazine, which can hold 1000+ gel beads at a time for endless fun..
  • User Manual (Safety Instructions): Please wear goggles when using the electric splatter blaster toy, and do not shoot at the opponent's head when playing combat shooting games, suitable for children 12 years old and above.It charge for ....
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock