Best 3 4 Horsepower
STA-Rite SNC-L Shallow Well Jet Pump 1/2HP 115/230V
- Quality Construction - Close-grained cast iron body. Drain port provided for easy winterizing.
- Precision Molded Diffuser - Pump primes faster, handles more air, with multi-port, precision-molded..
- High-flow version of the 1/2 HP model allows higher flow rates with less horsepower and pressure, Pressure regulator included.
- Horsepower: Available in 1/2, 3/4, 1, and 1-1/2 HP, Maximum Liquid Temperature: 140°F (60°C), Returns will not be ACCEPTED if item has been INSTALLED or there should be no signs of installation. Must be returned in the Same Packaging as received..
- Discharge Size: 1" NPT, Suction Size: 1-1/4" NPT, Voltage: 115v / 230v, 60Hz, 1-phase.
Check StockNEW HOLLEY SNIPER EFI STEALTH KIT 4150 4 BBL FUEL INJECTION CONVERSION MASTER KIT,GOLD,870 CFM,COMPATIBLE WITH 4150 FLANGE STYLE MANIFOLDS
- ...: Brand: Holley Sniper EFI | CFM: 870 | Emission Code: 3 | Finish: Gold | Flange Style: 4150 | Fuel Pressure: 58.5 PSI | Height: 3.28 | Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female.
- Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female O-Ring (AN 8) | MAP Sensor: 2Bar | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4 Ford C4/C6 TH350.
- The Sniper Stealth 4150 EFI system from Holley features 4, 100LB/HR Fuel Injectors capable of supporting up to 650 HP naturally aspirated or 600 HP on forced induction applications. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Did we mention that the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications..
- Master Kits include complete fuel system with an external fuel pressure regulator preset to 58.5 PSI, 20 feet of 3/8″ Vapor Guard Fuel Hose, Fuel Pump, Filters, necessary hardware & bulkhead fitting to return fuel into the tank!.
Check StockAmpFlow F24-150-12V Brushed Electric Motor, 6V, 12V, or 18 VDC, 5600 rpm
- Measures 3.1 inches diameter (78 mm) by 4.0 inches long (102 mm).
- Can be used with voltages ranging from 12V to 36VDC.
- Maximum power: 740 watts (1.0 horsepower).
- Maximum stall torque: 5.0 Nm (710 oz-in).
- Peak efficiency at 24V: 76% at 17 amps and 4900 RPM.
- Power and torque at peak efficiency: 309 watts, (0.41 horsepower), and 600 mNm (85 oz-in).
Check StockAmpFlow A28-400-G Electric Gearmotor, 12V, 24V or 36 VDC, 580 RPM
- Gearhead measures 6 x 3 x 2 inches. The motor is 6.7 inches long. The total weight is 10.4 pounds..
- Can be used with voltages ranging from 12V to 36VDC.
- Maximum power: 3200 watts (4.3 horsepower).
- Maximum stall torque: 208 Nm (1840 In-Lbs.).
- Peak efficiency at 24V is at 50 amps and 540 RPM.
- Power and torque at peak efficiency: 1000 watts (1.3 horsepower) and 17 Nm (155 In-Lbs.).
Check StockNewport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size
- 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
- CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
- FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
- REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check StockShop Fox W1772-37" 10 HP Drum Sander
- 1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified.
- Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H.
- Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3".
- Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle).
Check StockHamilton Beach 94950 Commercial Mix n Chill Drink Mixer,Black,Medium
- Commercial drink mixer equipped with powerful 3/4-horsepower motor.
- Durable stainless-steel agitator delivers effective vertical blending.
Check StockWORKPRO 4 Gallon Wet/Dry Vacuum, 4 Peak HP Shop Vac Cleaner with HEPA Filter, Hose and Accessories for Home/Jobsite
- High Efficiency: 4-gallon metal tank designed for durability and long cleaning times. 4 peak horsepower motor provides powerful suction for quick cleaning..
- 3 IN 1 Multi-Function: Peak 4 horsepower with strong dry/wet suction and blowing function as well. It's used to clean the jobsite dust, wood chippings, debris or wet sewage, also you can use it to blow the leaves or clean the patio as you want..
- Further Cleanup: With over 19 ft. of cleaning reach (7-1/2ft.hose and extension wand, 11-1/2ft. power cord) and wheeled base, it makes sure you most time no need to change the switch plug to complete your cleaning task.
- Accessories Included: 1-1/4In. x 5ft. Hose, Crevice Tool, Half-round dust brush, Multi-surface floor nozzle, Foam Wet Filter, Cartridge filter, Extension wand*3, Dust collection bag.
- Design and Applications: Non-stick HEPA media filter that prevents ash from passing into the exhaust air stream. The wheeled base design offers unparalleled mobility, better for the home, garage, cars, trucks and vans.
Check StockWaste Maid 10-US-WM-658-3B Garbage Disposal Anti-Jam and Corrosion Proof Stainless Steel Food Waste Grinding System Odor Protection 1-1/4 HP Premium Black
- EASY 3-BOLT MOUNTING: A standard 3-bolt mounting system makes for fast installation and direct replacement for most garbage disposal brands using....
- 1-1/4 HORSEPOWER MOTOR: The Waste Maid garbage disposer features a 1-1/4 horsepower 2800 RPM permanent magnet motor that operates on 120V 60Hz power....
- TORQUE MASTER GRINDING SYSTEM: Anti-jam Torque Master stainless steel grinding system delivers maximum torque for cutting through waste and a....
- ANTI-ODOR TECHNOLOGY: The garbage disposal is treated with a unique agent molded inside to protect against odors, keeping your kitchen sink from....
- CONTINUOUS FEED OPERATION: Continuous feed garbage disposals let you add food waste into the disposal even while it is running. It is recommended to....
Check StockCrosscut Saw, 3' One Man Crosscut Saw is used for Logging.
- Voltage 120, Amps 15, Blade Size 10-1/4", No Load RPM 5,200.
- Max Watts Out (Power) 2,300, Peak Horsepower 3.1, Electric Brake YES.
- Depth of Cut at 90° 3-13/16", Depth Cut at 60° 1-3/4", Depth of Cut at 45° 2-3/4", Bevel Capacity 60°.
- Cord Type 2-Wire, Construction Type Double Insulated, Cord Length 12', Length 17.5", Tool Weight 17.8 lbs.
- Includes: Circular Saw, Steel Case, Rip Fence.
Check StockAmpFlow A28-150-F48 Brushed, Fan-Cooled, Rare-Earth Neodymium Magnet Motor, 36V to 48V VDC, 7400 rpm
- Measures 3.0 inches diameter (77 mm) by 5.1 inches long (129 mm).
- Can be used with voltages ranging from 36V to 48VDC (or down to 24V with the appropriate fan).
- Maximum power: 3430 watts (4.6 horsepower).
- Maximum stall torque: 17.7 Nm (2500 oz-in).
- Peak efficiency at 48V: 82% at 28 amps and 6750 RPM.
- Power and torque at peak efficiency: 1100 watts (1.5 horsepower) and 1550 mNm (220 oz-in).
Check StockAmpFlow A28-400-F24 Brushed, Fan-Cooled, Rare-Earth Neodymium Magnet Motor, 18V, 24V, or 28 VDC, 4900 rpm
- Measures 3.0 inches diameter (77 mm) by 7.8 inches long (198 mm).
- Can be used with voltages ranging from 18V to 28VDC (or wider range with the appropriate fan).
- Maximum power: 3200 watts (4.3 horsepower).
- Maximum stall torque: 25 Nm (3560 oz-in).
- Peak efficiency at 24V: 83% at 50 amps and 4500 RPM.
- Power and torque at peak efficiency: 1000 watts (1.3 horsepower) and 1350 mNm (300 oz-in).
Check StockWaring(WCG75) 3 cup food processor
- Pro Prep chopper grinder has 3/4-quart capacity.
- Powerful 3/4-horsepower, high-speed 2-pole induction motor.
- Features 120-VAC, 60-hertz, UL approvals.
- 2 Separate bowl and blade assemblies 1 for grinding 1 for chopping.
- It has dishwasher-safe parts, stackable bowls.
Check Stock