LotFancy Adjustable Battery Hold Down, Universal Battery Bracket with J Hook, Battery Tie Down Kit, 9.1inch (23cm) Bolt Length
- Adjustable: Bolt length: 9.1inch (23cm). 3.74inch long thread for height adjustment. Adjustable cross-bar expands from 5.7" to 8.5" wide. Thread size: 1/4"-20 UNC. Please confirm your battery size before purchasing.
- High Quality: This car battery hold down is made of premium iron, sturdy and available for long service life. The surface is anodized for enhancing its corrosion and rust resistance.
- J Hook: Compared with other’s L hook, our J hook can hold down battery more securely. It won’t slide out of the tray easily.
- Easy to Install: Adjust the width and height according to the size of the battery, hook the J hook into the hole on the tray, tighten the wing nut screws to ensure a firm grip on the battery. The battery holder provides steady holding for the battery.
- For Most Battery Size: This adjustable battery holder can be used for group 21,21R,22F, 22R, 24, 25, 26, 26R, 27, 31, 33, 34, 34R, 35, 36R, 41, 42, 43, 46, 47, 48, 49, 65, 78, 94R Batteries and most group size batteries.
Check StockUS Motors AST125 Nidec Replacement Swimming Pool Pump Motor
- Replacement 1.25 Total Horsepower (THP) swimming pool pump motor.
- Standard 56J-Frame, C-Flange motor with threaded shaft.
- Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
- Designed to replace a 1-HP Up-Rated or 3/4-HP Full-Rated motor and compatible with 115/230 volts.
- Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.
Check StockStanley Proto J6018RK 3/4 Drive Ratchet Head Repair Kit - Torque Wrench
- 1/4-inch to 1-inch ratchet wheels made from alloy steel for uncompromising strength and durability.
- Field repair your torque wrench ratchet head easily with the corresponding repair kit.
- Use with:J6018AB, J6018CX, J6018CXCERT, J6020AB, J6020CX, J6020CXCERT, J6020NM.
Check StockAjustable Battery Hold Down with Stainless J bolt Kit,A Specialty Automotive Tools Car Battery Holder of Car SUV Truck RV Camper and Trailer (11inch/27cm bolts)
- ...work less difficult. Holds the battery securely, eliminating the safety hazards and dangers of a poorly secured battery while driving..
- 【Buyer's guide】: Before choosing our heavy duty battery holder, measure your battery in the following fitment ranges. Width 5.7-8inch,Length 1:4.9-10inch/Length 2:3.74-8inch/Length 3:6.5-11inch.Please choose the right holder according to your car battery size before purchasing..
- 【Save on maintenance costs】:These battery mounts with bolts and J-bar are very easy to install and use easily, even if you're not a professional mechanic and like to fix your own car, this is definitely a smart choice! Instead of going to the garage,do-it-yourself repairs save you from expensive repairs..
- 【100% satisfaction experience】: If you have any questions about the product, please send an email to our customer service, we offer a perfect service 24 hours a day. If the item is defective in any way, we are willing to send you a new one or give you a full refund to provide you with the most satisfactory product and service, thank you for your support!.
Check StockStanley Proto J6006RK 3/8' Drive Ratchet Head Repair Kit - Torque Wrench
- 1/4-inch to 1-inch ratchet wheels made from alloy steel for uncompromising strength and durability.
- Field repair your torque wrench ratchet head easily with the corresponding repair kit.
- Use with: J6006C, J6006CX, J6006CXCERT, J6006MC, J6006NMC, J6012C, J6066C, J6066CX, J6066CXCERT, Made in USA.
Check StockRod Desyne Clam Holdback Pair for Windows Satin Nickel
- This Clam holdback pair includes two finials, two J hooks and mounting hardware.
- Each finial size: L: 3-1/2 inch, W: 2-3/4 inch.
Check StockTahikem 4 Pcs Kayak Rack Wall Mount, Canoe Hanger Hooks, Kayak Storage Hook, Garage Hanger Ladder Brackets, for Hanging Outdoor Beach Folding Chair Bicycle Surfboard Snowboard Paddle Board - Black
- ...ehouse. High-quality storage hooks can hold a variety of large tools, suitable for storage of large items such as shovels, canoes, kayaks, snowboards, ladders, tools and wood..
- 【 PACKAGE & BEARING CAPACITY 】4 sets “J” type wall mount garage hooks + 4 pcs nylon storage strap. Kayak storage hook size is 10-1/2 Inch x 15 Inch (38cm x 26.5cm). The diameter of the round tube steel is 3/4 inch (2cm). The maximum load-bearing capacity is 50 pounds..
- 【 QUALITY MATERIAL & EVA ARM 】Round tube steel and no welding process make the canoe hanger hooks strong. The black non-slip EVA arm is useful for fixing objects, protecting the surface from scratches or damage, and preventing the canoe(kayak/Ski board/ladders/etc.) from slipping off..
- 【 EASY TO INSTALL 】This Tahikem kayak hangers can be installed on plaster, wooden, brick and concrete walls. Only 3 steps to complete the installation: 1) Drill 2 holes in the wall. 2) Use a hammer to knock the yellow plastic bolts into the hole. 3) Use an electric drill to fix the screws and kayak hangers into the plastic bolts..
- 【100% Satisfaction】 30 Days Satisfaction Guarantee. If you have any question about the canoe hanger hooks, please contact us. We will reply within 24 hours..
Check StockTitan Fitness T-3 Series 92-inch Squat Stand 1,000 LB Capacity Tall Squat Rack with Reinforced J-Hooks
- TALL SQUAT STAND: Featuring (2) 91-inch laser-cut steel uprights with Westside hole spacing through the bench and clean pull zone, 2-inch spacing....
- INCLUDED STANDARD J-HOOKS: Our standard, default J-Hook features UHMW plastic core on the backside and the clasp to protect the bar's knurling and the....
- STANDARD PULL-UP BAR: Our standard, default front crossmember is the T-3 Series Single Pull-Up Bar with a 1.25-inch diameter. This bolt-on bar....
- DESIGNED SAFE. DESIGNED STRONG.: You are never more vulnerable as an athlete than when you are working out heavy, let alone maxing out. Our T-3 Series....
- HARDWARE INCLUDED: Each unit comes with all the hardware you need to assemble your T-3 Series Tall Squat Stand. For safety reasons, Titan recommends a....
Check StockCables Direct Online Adjustable Outdoor Roof TV Antenna Mount J Pole Solid Base Tripod Weather Proof
- Our Tripod is made of solid steel,heavy-duty and is user-friendly. You can mount your antenna with it on the wall, on the roof or on your balcony..
- Adjustable direction, The mounting pole can be rotated 60 degrees for best reception angle to get strongest signals.
- Easy installation, Comes with all the screws and plastic anchors, super easy to assemble..
- Perfect for wall or roof mount - This black-coated steel J-mount ensures a secure installation.
- 18 Inch mount- maximum diameter 1 Inch - Maximum acceptance weigh 66LBS.
- Weather Proof - can be installed outside or in the attic and has a black-coating to blend with its environment..
- Package Includes - 1 x J-Pole Aerial Bracket, 1x Base, 4 x Wall Screw, 4 x Bolt, 2x Cap.
Check StockALEKO Steel Dual Swing Driveway Gate Munich Style 16 x 6 Feet DG16MUND
- ALEKO Munich Style Dual Swing Driveway Gate captures the classic magnificence of historic wrought iron gates at an affordable price.
- Gate Package Includes: (2) driveway gate panels, (2) gate posts - 8 feet by 3.5 x 3.5 inches each, (4) LM114 0.75 inch regular hinge J-bolts.
- Material: Galvanized steel gate with a powder paint coating.
- protected against rust and weather damage.
- Compatible With: Munich panel fencing, Munich-style pedestrian gate and dual swing gate openers.
- Gate Dimensions: 16 x 6 feet. Color: Black.
Check StockARONOVA Adjustable Battery Hold Down,Universal Crossbar with 8''length,18-8 (304) Stainless Steel J bolt sets
- Premium iron crossbar & Stainless steel j bolt sets,anti-rust, sturdy and available for long service life..
- Adjustable crossbar, from 5.35" to 7.85" wide,available in 8/10/11/12 inch j bolts..
- Exclusive finishment,thermoset baked-on Premium powder coat finish for a bright and durable surface..
- Simple design,easy installation, directly replace your broken one, convenient to use.A perfect modification accessory for racing, sports car, RV,boats,etc..
- Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..
Check StockCTA Tools 9030 Fluted Screw Extractor Set 5-Piece
- Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
- Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
- Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
- Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
- Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.
Check StockARONOVA Adjustable Battery Hold Down,Universal Crossbar with 10''length,18-8 (304) Stainless Steel J bolt sets
- Premium iron crossbar & Stainless steel j bolt sets,anti-rust, sturdy and available for long service life..
- Adjustable crossbar, from 5.35" to 7.85" wide,available in 8/9/10/11/12 inch j bolts..
- Exclusive finishment,thermoset baked-on Premium powder coat finish for a bright and durable surface..
- Simple design,easy installation, directly replace your broken one, convenient to use.A perfect modification accessory for racing, sports car, RV,boats,etc..
- Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..
Check Stock