Categories

Best 3 5 Mono Pin

OKI MICROLINE 320 Turbo Mono Dot Matrix Printer (62411601)

  • OKI MICROLINE 320 Turbo Mono Dot Matrix Printer (9 Pin) (435 cpm) (64 KB) (240 x 216 dpi) (120V) (Max Duty Cycle 20 000 Pages) (USB) (Parallel).
Check Stock

OKI MICROLINE 320 ML320 Turbo Mono Dot Matrix Printer (62411601) | Includes Jetset Software

  • OKI MICROLINE 320 Turbo Mono Dot Matrix Printer (9 Pin) (435 cpm) (64 KB) (240 x 216 dpi) (120V) (Max Duty Cycle 20 000 Pages) (USB) (Parallel).
Check Stock

Neewer XLR Splitter Female to 2 Male Cable, 3-Pin XLR Female to Dual XLR Male Patch Y Cold Balanced Microphone Splitter Cable Audio Adapter — 1.6 Feet

  • 【XLR Female to Dual Male Mic Cable】 This 3-pin XLR female to dual XLR male Y cable is designed to connect an XLR output to two XLR inputs. Ideal for splitting a microphone signal into two channels on a mixing console.
  • 【Wide Compatibility】 Compatible with a wide range of equipment with 3-pin XLR connectors such as shotgun microphones, vocal harmonizers, mixing boards, patch bays, preamplifiers, speaker systems, audio mixers, amplifiers, equalizers, limiters, audio crossovers, digital decoders, and stage lighting instruments.
  • 【Durable & Flexible】 Nickel-plated connectors come with metal locking latches for secure locking. This cable uses oxygen-free copper (OFC) and cable shielding to reduce electromagnetic interference (EMI) and radio-frequency interference (RFI).
  • 【Balanced Connection】 The pin 1 / pin 2 / pin 3 of the male connector is connected to the pin 1 / pin 2 / pin 3 of the female connector respectively. The balanced connection helps reduce interference and provides a pristine signal.
  • 【Splitter Cable】 This cable just splits a stereo signal into two mono signals.
  • It doesn’t combine two signals into a stereo signal.
Check Stock

DISINO XLR to 3.5mm (1/8 inch) Stereo Microphone Cable for Camcorders, DSLR Cameras, Computer Recording Device and More - 5ft

  • 5 FT Unbalanced 3-PIN Female XLR to 3.5mm TRS Stereo Mic Cable, It's ideal for connecting an MONO XLR microphone to the 3.5mm mini input of a digital camcorder, DSLR camera, or computer sound card.(Note: If you plan to use a condenser microphone, please be sure that your camcorder provides phantom power or that your microphone has a built-in battery power supply).
  • It's designed to feed the mono mic equally to both input channels on the camcorder, Please check that you're plugging it into the mic input jack on your device and not the speaker output jack. If you only have one, it's a combo and this plug probably won't work at all. you should have a USB microphone for that kind of usage..
  • This won't work on an iPhone or Android phone which has TRRS 4 Pole port. You need a phone-3.5mm mic adapter(TRRS to TRS adapter), then this cable plugs into that one..
  • High strength aluminum alloy die-cast housing, Nickel-plated connections, 4N Oxygen-free copper(OFC) core to deliver pristine sound. Foil twisted pair shielding line for effective EMI and RFI rejection..
  • Polyethylene insulation Cotton Yarn wrap features improves high frequency response..
Check Stock

Epson Tm-u220b-653 Dot Matrix Receipt Printer Serial Epson Dark Gray Autocutter Power Supply Included

  • OKI MICROLINE 320 Turbo Mono Dot Matrix Printer (9 Pin) (435 cpm) (64 KB) (240 x 216 dpi) (120V) (Max Duty Cycle 20 000 Pages) (USB) (Parallel).
Check Stock

Rakstore Speak Recognition Voice Recognition Module V3 Compatible with for Arduino Support 80 Kinds of Voice DC 4.4-5.5 V High Accuracy

  • Digital Interface: 5V TTL level for UART interface and GPIO.
  • Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface.
  • Recognition accuracy: 99% (under ideal environment)；Size: 31mm x 50mm.
Check Stock

(4) Rockville 6.5\ LED Swivel Metal Marine Wakeboard Speakers+Amplifier+Amp Kit

  • ... Rubber Surround. 15 oz High Density Magnet. 1" Voice Coil. CE and RoHS Certified. These wakeboard speakers fit bars ranging from 1" to 2.5". Dimensions per speaker (H x W x D): 7.8" x 7.8" x 11.8". Weight per speaker: 5.3lbs. Color: polished silver. Features: RockvilIe RXM-F3 1600 Watt Peak/800w RMS Marine Class D Mono Block Amplifier.
  • CEA Compliant Power Ratings: .65 Watts RMS x 4 Channel @4 Ohms and 1% THD+N .85 Watts x 4 @ 2 Ohms 003c 1% THD .2 x 200 Watts bridged @ 4 Ohms 003c 1% THD. RMS Power Ratings: .800 Watts (4 x 200 Watts RMS) @ 2 Ohms .800 Watts (2 x 400 Watts RMS) @ 4 Ohm Bridged .500 Watts (4 x 125 Watts RMS) @ 4 Ohms. Peak Power: .1600 Watts (2 x 800 @ 2 Ohms or 1 x 1600 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors.
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH3 & CH4 Low Pass 50Hz - 3KHz. CH3 & CH4 High Pass 15Hz - 1KHz. CH1 & CH2 High Pass 50Hz - 300Hz, 500Hz - 3Khz (x10). Crossover Band-Pass Control. Fully Adjustable 12dB Bass Equalizer. 2 Ohm Stable Stereo. 4 Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Full IC-Controlled Protection Circuitry. Mute and Delay Soft Start System. High Level Input with Smart Auto Turn-On. Full IC-Controlled Protection Circuitry.
Check Stock

Beaster Voice Recognition Module with Microphone Dupont Jumper Wire Speech Recognition Voice Control Board for Arduino

  • This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all..
  • This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized..
  • Digital Interface: 5V TTL level for UART interface and GPIO.
  • Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface.
Check Stock

Jewellery From Art Nouveau to 3D Printing

  • 6.23" Large Screen: Photon Mono 4K Resin 3D Printer is upgraded to a 6.23" Monochrome LCD screen, 29% larger than ANYCUBIC Photon's 5.5" screen. Rapid....
  • Large Build Volume: ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19" x 3.14" x 6.49", which leaves sufficient printing....
  • 4K High Resolution: The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can....
  • Fast Printing Speed: ANYCUBIC Photon Mono 4K Resin 3D Printer's max printing speed can reach 50mm/h, it only takes 2.5 hrs to print a 12cm / 4.7in....
  • Universal Compatibility: Photon Mono 4K is compatible with most 3d printing resin on the market, you can get the best printing effect with ANYCUBIC 3D....
Check Stock

beyerdynamic DT 1770 PRO Headphones with Carrying Case and Pro Audio Headphone Stand Kit

  • ...ity: +6dB FS/PA (all polar patterns). Max. SPL: 120dB SPL. Bit Depth/Sample Rate: 16 or 24-bit/Up to 96kHz. Digital Output: USB.
  • Headphone Output/Impedance: 1/8" (3.5mm)/ 16 Headphone Power Output: 85mW @ 32 Instrument Input/Impedance: 1/4"/ 1M Controls: Mute, Microphone/Instrument/Headphone Volumes, Monitor On/Off, Mono/2 Track. LED: 3-color Power/Clip/Mute. Body Construction/Grille: Die-cast zinc/heavy gauge mesh. Accessories: Integrated desktop base, USB cable. Product Dimensions: 4.5" x 10.5" diameter(116mm x 268.5mm diameter). Product Weight: 3.52lb (1.6kg).
Check Stock

GELRHONR XLR to 2 RCA Y Splitter Audio Cable,Unbalanced 3 Pin XLR Female to Dual RCA Male Stereo Breakout Cable Adapter Patch Cord Gold-Plated Plug for Microphone Mixing Console Amplifier - 0.3M/1Ft

  • ✪ XLR Female to Dual RCA Male Y splitter cable: Connect any audio equipment with a female XLR connector to RCA input, It splits the mono XLR signal into two separate mono RCA cables， and connects to the RCA input on a separate device..
  • ✪ Standard XLR female to 2 RCA male plug audio cable.Converting an XLR cable into a long RCA cable - Integrating Home theater and Pro Audio gear..
  • ✪ Unbalanced Connection: This adapter is only available in an unbalanced format, it is not possible to make a balanced RCA to XLR adapter. wiring pin 2 of the XLR to the RCA plug, and Pin 1 and Pin 3 of the XLR connects to the sleeve of both RCA plugs.This is an adapter to let you use an XLR mic/ component on your RCA circuit..
  • ✪ 20 AWG Oxygen Free Copper with Foil shielding eliminate interference, deliver pristine sound, noise shielding, crystal clear music. High quality noise free performance.24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer..
  • ✪ This adapter is commonly plugged into a stereo RCA input/output to create an XLR female connection,Conecting DJ Controllers to Amplifiers.The XLR signal is simply split across the RCA connectors. Suitable for splitting or combining audio si....
Check Stock

Cable Matters XLR Splitter Cable Female to 2 Male XLR Y Cable - 18 Inches

  • Pro-grade XLR y splitter cable is designed for a Microphone, professional recording, mixing, or studio equipment with standard 3 pin XLR connectors.
  • Amp y splitter cable with a soft PVC jacket in a flexible 18 inch length easily connects to equipment with a single XLR output such as a DAC or guitar....
  • Balanced audio options with this bi-directional XLR splitter female to dual male.
  • Split a Mic stereo to L R signal with this XLR stereo to mono cable.
  • Rugged metal connectors have easy-grip treads, molded strain-relief boots, and gold-plated contacts to provide maximum flexibility, durability and....
  • XLR female to 2x male cable is compatible with a wireless Microphone, PA mixing board, DAC mixer, guitar amplifier or other equipment with a 3-pin XLR....
Check Stock

ORION HCCA30001DSPLX Serie Class D SPLX Mono Amplifier 3000W WATTS RMS Stereo Car Amp 2022

  • HCCA3000.1DSPLX Class D Monoblock Amplifier 3000 Watts RMS.
  • Frequency Response 15 Hz to 250Hz +/- 2.5 dB.
  • NEW HIGH PRECISION 51 PIN ALL POTENTIOMETERS W.
  • RMS WATTS @ 1 OHM MONO @ 0.5% THD+N - 3000W.
Check Stock