Best 3 5 Tft - TopShopReview.com

sb components 3.2\ TFT LCD Transparent Case for Raspberry Pi 2 and Raspberry Pi 3 (Black)

This is a no-nonsense protective case for 3.2" TFT LCD for Raspberry Pi 3 Model B.
The case is a three-piece injection-moulded ABS enclosure that snaps together around 3.2" TFT LCD and Raspberry Pi 2.
It provides the best available protection/accessibility for 3.2" TFT LCD and Raspberry Pi 2 Model B.
Wall Mountable. Access to all Pi 2 consumer ports..

Check Stock

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..

Check Stock

BIGTREETECH Upgrade PITFT50 V2.0 Graphic Smart Display DSI Interface 5 inch LCD Touch Screen Suitable for Raspberry Pi

1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
with a capacitive touch panel. Supports 5-point touch..
3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..

Check Stock

DIYmall Mini PiTFT 1.3″ LCD Display 240×240 TFT Add-on for Raspberry Pi 3.3V SPI ST7789 3.3V SPI ST7789 Full Color

TFT size： 1.3″ diagonal, Voltage：3.3V, Interface：SPI, Driver: ST7789, Color：Full color.
The Mini Pi TFT 1.3 ” – 240×240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi , to give you a little display..
The Mini Pi TFT comes with a full color 240×240 pixel IPS display with great visibility at all angles..
The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case..

Check Stock

DIYmall Mini PiTFT 1.3″ LCD Display 240×240 TFT Add-on for Raspberry Pi 3.3V SPI ST7789 3.3V SPI ST7789 Full Color(Pack of 2PCS)

TFT size： 1.3″ diagonal, Voltage：3.3V, Interface：SPI, Driver: ST7789, Color：Full color.
The Mini Pi TFT 1.3 ” – 240×240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi , to give you a little display..
The Mini Pi TFT comes with a full color 240×240 pixel IPS display with great visibility at all angles..
The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case..

Check Stock

5’’ Inch TFT LCD Car Color Rear View Monitor Screen for Parking Rear View Backup Camera with 2 Optional Bracket(Suckers Mount and Normal Adhesive Stand), Camera not Included, Monitor Only

5” Inch Digital TFT LCD Color Monitor Screen for Car Rear View Parking Backup Camera, Camera not included, Monitor Only.
Anti-glare High Resolution,800(RGB)X480, 5-inch TFT LCD screen with excellent color.
Working perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment.
Perfect companion product for a Chuanganzhuo’s backup camera,Automatically starts when the car back up, video opened at the same time.
Package content:1 x 5″ TFT LCD Monitor.

Check Stock

ZHONGJI Touch Full Flat Screen PC Retail Point of Sale System Cash Register with Installed Thermal Receipt Printer, Cash Box for SMEs,Restaurant and Bars

【NOTICE BOARD】:We only installed the not activated windows 10 pro version and not activated pos software.
【POS SYSTEM 】 : Intel Celeron K1900 Dual Core 2.4GHz / 64G SSD / 4GB RAM / 15” 5-Wire Resistive TFT LCD Touch Screen（Main Display）/ 15'' TFT LCD(Customer Display)..
【PROFESSIONAL THERMAL PRINTER】: 80mm Thermal Receipt Printer , Auto Full or Half Cut, Support logo printing.
【STELL HEAVY DUTY RJ45 CASH DRAWER】 :Spring-loaded steel bill clips,5-coin compartments,3-position lock,RJ11 Crystal phone jack, quality guaranteed steel..
【EXTRA BONUS FREE OF CHARGE 】: life long after sale service, High quality cash register thermal paper X 10 Rolls, Keyboard X 1 Piece, Mouse X 1 Piece..

Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..

Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
⭐【Satisfying After-Sales Support】If you have ....

Check Stock

BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer

...pearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen..
❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk..
❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port..
❤【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated..
❤【Quality Warranty 】TFT35 E3 V3.0.1 touch screen is designed and produced by BIGTREETECH team,any qu....

Check Stock

BIGTREETECH Smart Filament Sensor Filament Break Detection Module 3D Printer Parts for 1.75mm Filament SKR V1.3 Mini E3 GEN V1.4

1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening..
2) It can detect that the consumables such as consumables are broken and the consumables are not used..
3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C language development, low development threshold..
4) Support the motherboard with the break detection interface..
5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode)..

Check Stock

NEXTION 7 inch Enhanced NX8048K070-011C HMI Touch Screen LCD Display Pannel 800x480 with Enclosure Case for Arduino Raspberry Pi (Capacitive)

Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or device, it is the best solution to replace traditional LCD and LED. Replace the Nixie tube. It is mainly used in the Internet of Things (IoT) or consumer electronics..
Nextion consists of a hardware part (a series of TFT cards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port for communication. Save users the hassle of wiring. It is easy to adapt the Nextion family HMI to existing projects. Users just need to provide it with a UART..
You can power Nextion 3.5 from the 5V pin on the microcontroller, but this is not recommended. Working with insufficient power can damage the screen, so please use the power board that comes with nextion. See the image for use..
NX4832T035 is a powerful 3.5 inch HMI. Features include: 3.5 inch 480 x 320 TFT resistive touchscreen display, 16MB Flash, 2KB RAM, 65,000 colors. Viewing area: 73.44mm (L) × 48.96mm (W).
Uploading a TFT file via an SD card is faster than a 4-pin serial connection, but the credit card is in FAT32 format and does not exceed 32GB..

Check Stock

ZHONGJI Double Touch Screen All in one Retail Point of Sale System Cash Register pos syetem-Installed 58mmThermal Receipt Printer &80mm Thermal Printer, Cash Box for SMEs,Restaurant and Bars

【NOTICE BOARD】:We only installed the not activated windows 10 pro version and not activated pos software.
【POS SYSTEM 】: Intel Celeron K1900 Dual Core 2.4GHz / 64G SSD / 4GB RAM / 15” 5-Wire Resistive TFT LCD Touch Screen（Main Display）/ 17'' TFT LCD(Customer Display)..
【PROFESSIONAL 58mm & 80mm THERMAL PRINTER 】:Support USB interface, High Speed Printing, Command, Installed Date Buffering Command.
【STELL HEAVY DUTY RJ45 CASH DRAWER】 :Spring-loaded steel bill clips,5-coin compartments,3-position lock,RJ11 Crystal phone jack, quality guaranteed steel..
【EXTRA BONUS FREE OF CHARGE 】: life long after sale service, High quality cash register thermal paper X 10 Rolls, Keyboard X 1 Piece, Mouse X 1 Piece..

Check Stock