Categories

Best 3 5 inch Tft Touch Display

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

Smeg CMSU4104S Linea Aesthetic Fully Automatic Built-In Coffee System, 24-Inches

  • DESIGN: “Mystic-gray” glass finish, Full-color TFT touch screen display, 4 LED lights.
  • FEATURES: Adjustable coffee size (5 levels) and temperature (3 levels), Frothing nozzle for cappuccino Multi-language display,.
  • DIMENSIONS(HxWxD): 17 13/16 x 23 1/2 x 18 1/4-Inches.
  • ELECTRICAL SPECIFICATIONS: Tension/frequency: 120 V.
  • ADDITIONAL INFORMATION: Water tank capacity: 81 oz, Coffee bean container capacity: 0.77 lbs.
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

  • ...3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
  • ⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
  • ⭐【Satisfying After-Sales Support】If you have any problems about BTT SKR MINI E3 V3.0 & TFT35 E3 V3.0.1 smart display combo sets, please feel free to contact us anytime. We have profession technical supports team to help you as soon as we can..
Check Stock

7 inch Capacitive Touch Display 800x480 Hardware Resolution Touchscreen 7 inch DSI LCD TFT Screen for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+

  • 800x480 hardware resolution 7inch Touch Screen TFT Display for Raspberry Pi.
  • Capacitive touch panel, support 5-point touch.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+. Another adapter board is required for CM3/3+.
  • Supports Raspbian/Ubuntu/Kali and WIN 10 IoT, driver-free.Support backlight adjusts by software..
Check Stock

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

  • 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock

Smeg CMSU4303X Classic Design Aesthetic Built-In Fully Automatic Coffee System with Milk Frother Stainless Steel, 24-Inches

  • BEAUTIFUL DESIGN: “Mystic-gray” Glass Finish, Color TFT Soft Touch Screen Display, 4 LED lights.
  • FEATURES: Adjustable Coffee Size (5 levels) and Temperature (3 levels), Automatic Switch On, Descaling Function, and Steam Function..
  • DIMENSIONS(HxWxD): 17 9/10 x 23 2/5 x 14 1/5-Inches.
  • ELECTRICAL SPECIFICATIONS: Tension/frequency: 120 V.
  • ADDITIONAL INFORMATION: Water tank capacity: 81 oz, Coffee bean container capacity: 0.77 lbs.
Check Stock

LCD Touch Panels Touchpanel Analog for DOGM128-6 (EA TOUCH128-1)

  • ...fers 1 G Hz Cortex A8 CPU driving device and 256 Flash memory for HMI projects. You also get RS232/TTL UART Interface and USB port. The module is compatible with 7/28V wide operation voltage. (This is an excellent choice for your Arduino and Raspberry Pi projects.).
  • Clear, Detailed, Hi Res HD - Our Smart HMI TFT LCD display offers excellent 800x480 high resolution with 4-wire resistance touch screen. Rich 262K (18bit) color for high color restore. Rectangular ratio 16:9 display format conversion. 70°/70°/50°/70° wide viewing angle, adjustable brightness（300 cd/m²) , TTF Font and contrast (500:1) offers you the ultimate project experience to accomplish more with improved results..
  • Ultimate TFT LCD Display Module for Industry - SCBRHMI Intelligent TFT-LCD Module Model STWI070WT-01 is a customer favorite for a wide range of industrial and business applications. You get highest quality with the most usable functions. Often purchased for equipment in medical, beauty, engineering, industrial control, electric power, civil electronics, automation, traffic, new energy, and IOT applications..
  • Generous 3 Year Warranty - We make SCBRHMI products to last and work well on the job. If this breaks, return it and we will replace it at no cost. Our displays ....
Check Stock

ZHONGJI Touch Full Flat Screen PC Retail Point of Sale System Cash Register with Installed Thermal Receipt Printer, Cash Box for SMEs,Restaurant and Bars

  • 【NOTICE BOARD】:We only installed the not activated windows 10 pro version and not activated pos software.
  • 【POS SYSTEM 】 : Intel Celeron K1900 Dual Core 2.4GHz / 64G SSD / 4GB RAM / 15” 5-Wire Resistive TFT LCD Touch Screen（Main Display）/ 15'' TFT LCD(Customer Display)..
  • 【PROFESSIONAL THERMAL PRINTER】: 80mm Thermal Receipt Printer , Auto Full or Half Cut, Support logo printing.
  • 【STELL HEAVY DUTY RJ45 CASH DRAWER】 :Spring-loaded steel bill clips,5-coin compartments,3-position lock,RJ11 Crystal phone jack, quality guaranteed steel..
  • 【EXTRA BONUS FREE OF CHARGE 】: life long after sale service, High quality cash register thermal paper X 10 Rolls, Keyboard X 1 Piece, Mouse X 1 Piece..
Check Stock

Nextion Display 3.5 NX4832T035 Resistive Touch Screen UART HMI LCD Module 480 x 320 + Acrylic Case Enclosure Transparent for Arduino Raspberry Pi

  • NX4832T035 is nextion 3.5 basic screen: 3.5 inch TFT, 480x320 resistive touch display, 16M flash, 2K Byte RAM, 65k colors..
  • You can power nextion 3.5 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Display 3.2 inch NX4024T032 Resistive Touch Screen UART HMI TFT LCD Module 400x240 + Transparent Acrylic Case Enclosure for Arduino Raspberry Pi

  • NX4024T032 is nextion 3.2 basic screen: 3.2 inch TFT, 400x240 resistive touch display, 4M flash, 2K Byte RAM, 65k colors..
  • You can power nextion 3.2 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock