Categories

Best 3 Axis Machining Center

Center Drill Bits Kit 1.5/2/2.5/3/4mm Center Drill Bit 5pcs High Speed Steel Center Drill Bits 60 Degree Center Drill Bit for Hole Processing

  • [Prefabricated Precise Positioning]: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • [Light Cutting and Good Chip Removal]: It has the advantages of light cutting and good chip removal.
  • When machining a center hole with a diameter of 2-10mm, this center drill is usually used.
  • [5 Center Drill Bits]: This 60 degree center drill bit has 5 center drill bits, which can be used to drill holes of different sizes.
  • [Made of High-speed Steel]: This center drill bit is made of high-speed steel, with high hardness and good wear resistance.
  • [Widely Used]: This center countersink drill bit can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
Check Stock

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

  • 【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
  • 【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
  • 【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
  • 【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
  • 【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock

Winmau Majestic 24 Gram Tungsten Darts Set with Flights and Stems (Shafts)

  • Set of 3 x 24g - 90% premium quality Winmau tungsten steeltip darts set.
  • Winmau Prism Force shafts & Winmau Prism Alpha flights.
  • High end laser engraved aluminium point protector.
  • Majestic's twin technologies work together to create ultimate dart control.
  • C-axis machining and geometry provides maximum rotational stability and control.
Check Stock

Mastercam 2017-2020 LATHE & C-Y AXIS Video Tutorial HD DVD

  • 1280x720 HD QUALITY - We concentrate on bringing the highest video/audio quality to make sure you concentrate on the lessons and can easily follow along lessons.
  • 101 VIDEOS / 9.5 HOURS - You will walk thru 7 exercises for a total of 101 videos that add up to 9.5 hours of training. With practice you can complete your training in 2-3 days and can easily start programming your first day.
  • EXERCISE FILES AND HOME LEARNING EDITION - DVD includes all the Exercise Files (both solidworks and mastercam files) and drawings in pdf format. Also Included is the Home Learning Edition so you can practice from home.
  • 7 TOTAL EXERCISES - There is 5 Lathe exercises and 2 C-Y axis exercises (This covers all the Lathe & C-Y Axis Features).
  • 15+ YEARS OF EXPERIENCE - The Instructor has over 15 Years of experience in machining and programming as well as tooling which he uses very effectively to explain why using certain tools and features is best in certain situations (Real World Training).
Check Stock

Customadeonly 2 Pieces 0.59' 15mm Hub Centric Wheel Spacers Bolt Pattern 4x4.5 4x114.3 Center Bore 66.1mm Thread Pitch 12x1.25 Studs for Nissan 240sx S13 Sentra Maxima 200sx 280zx

  • [PRODUCT DETAIL] QTY: 1 Pair. Hubcentric design & Bolt on installation for 4x114.3 66.1mm 12x1.25 application for Nissan & Infiniti's Only. Width: 15mm per side..
  • [BENEFITS] Our Wheel spacers /adapters are made for offset correction, improving the performance in handling & overall appearance enhancement..
  • [CRAFTSMANSHIP] Customadeonly wheel spacers are crafted by the automated CNC process in our 4 Axis machining center. Delivering consistent quality & precision to every product that produced which eliminates the balance issue that other brands may have..
  • [QUALITY] Made with high grade 6063 T-6 aluminum, the material is known for high tensile strength and durability. Customadeonly wheel spacers are also backed by our 3 YEAR product warranty against any functional defects..
  • [INSTALLATION] Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs.
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

Customadeonly 2 Pieces 1" 25mm Hub Centric Wheel Spacers Bolt Pattern 5x114.3 5x4.5 Center Bore 66.1mm Thread Pitch 12x1.25 Studs Compatible for G35 G37 240SX 350Z 370Z 300Zx

  • [PRODUCT DETAIL] QTY: 2 Pieces. Hubcentric design & Bolt on installation for 5x114.3 66.1mm 12x1.25 application Only. Width: 25mm (approx 1 Inch) per side..
  • [BENEFITS] Our Wheel spacers /adapters are made for offset correction, improving the performance in handling & overall appearance enhancement..
  • [CRAFTSMANSHIP] Customadeonly wheel spacers are crafted by the automated CNC process in our 4 Axis machining center. Delivering consistent quality & precision to every product that produced which eliminates the balance issue that other brands may have..
  • [QUALITY] Made with high grade 6063 T-6 aluminum, the material is known for high tensile strength and durability. Spacers are assembled with class 10.9 (SAE grade 8) carbon steel studs w/ heat treated. Customadeonly wheel spacers are also backed by our 3 YEAR product warranty against any functional defects..
  • [CONFIDENCE] Customadeonly wheel spacers are also backed by our life time warranty against any functional defects..
Check Stock

Winmau Aspria 18 Gram Softip Tungsten Darts Set with Flights and Stems (Shafts)

  • Set of 3 x 16g barrel weight, 18g full dart weight - 95/85% dual core premium quality Winmau tungsten steeltip darts set.
  • Prism Force shafts & Winmau Prism Delta flights.
  • Aspria's Dual Core bi-directional, precision-cut, Axis-Grip features the latest CAD CAM machining technology.
  • They are made from Winmau's unique Dual Core fused billets, incorporating 95/85% tungsten front loaded darts.
Check Stock

FiiO AM2A Medium-power Headphone Amplifier Module for FiiO X7 (Titanium)

  • Aerospace-grade aluminum-magnesium alloy, treated with five-axis CNC machining.
  • 4 Knowles DFK+SWFK BA driver units and one 13.6mm large beryllium diaphragm dynamic driver.
  • S.TURBO acoustic design, exotic-inspired independent sound tubes and exotic-inspired acoustic structural design.
  • Provided with a LC-3.5C earphone cable that is composed of high-purity Litz monocrystalline copper-plated silver wires..
  • Create your own sound with 3 pairs of interchangeable sound filters and 15 pairs of eartips (with 3 pairs of SpinFit tips in S/M/L).
Check Stock

TIMEMORE Chestnut C2 Manual Coffee Grinder Capacity 25g with CNC Stainless Steel Conical Burr - Internal Adjustable Setting,Double Bearing Positioning,French Press Coffee for Hand Grinder Gift

  • The best cost-effective choice-TIMEMORE C2 Grinder. Stainless steel burr-CNC machining. Double bearing central axis positioning-uniform grinding particles. Burr size 38mm-efficient grinding of coffee beans..
  • Convenient to carry : The body weighs 430g, while maintaining a light weight and a moderate sense of weight and luxury. It is ideal not only for home use but also for carrying outdoors or traveling..
  • Roughness adjustment function : Adjustable in about 36 steps. You can easily grind the desired roughness from fine to coarse with the adjustment nut..
  • Excellent Burr : The milling blade with 55-58HRC hardness in 5-axis CNC machining realizes uniform grinding with almost no excessively coarse grains. At the same time, the generation of fine powder is minimized..
  • Labor-saving performance : The smoother movement is realized as the handle keeps turning for a while even if you release your hand due to the built-in bearing. In addition, a compact body of 52 mm that is easy to grasp even for small hands. and it is possible to grind lightly with very little force..
Check Stock

TIMEMORE Chestnut C2 Manual Coffee Grinder,Stainless Steel Conical Burr,Capacity 25g,Burr size 38mm,double bearing positioning,Portable Mill Faster Grinding Efficiency Espresso to Coarse (White)

  • The best cost-effective choice-TIMEMORE C2 Grinder. Stainless steel burr-CNC machining. Double bearing central axis positioning-uniform grinding particles. Burr size 38mm-efficient grinding of coffee beans..
  • Convenient to carry : The body weighs 430g, while maintaining a light weight and a moderate sense of weight and luxury. It is ideal not only for home use but also for carrying outdoors or traveling..
  • Roughness adjustment function : Adjustable in about 36 steps. You can easily grind the desired roughness from fine to coarse with the adjustment nut..
  • Excellent blade : The milling blade with 55-58HRC hardness in 5-axis CNC machining realizes uniform grinding with almost no excessively coarse grains. At the same time, the generation of fine powder is minimized..
  • Labor-saving performance : The smoother movement is realized as the handle keeps turning for a while even if you release your hand due to the built-in bearing. In addition, a compact body of 52 mm that is easy to grasp even for small hands. and it is possible to grind lightly with very little force..
Check Stock

ThinkTop Mountain Bike Pedals Platform for MTB BMX, 3 Bearing High Strength Carbon Fiber Tube Sealed Lubricate, 9/16 Bicycle Cycling Road Bike Aluminum Flat Pedals

  • The brand design and processing - the use of five-axis NC machining equipment, each bearing error in 0.005 mm size precision, 6061 aluminum alloy body, lighter, more durable. Central carbon fiber tube, low density, high strength.CNC machining:forming machine processing, fashion more beautiful..
  • 3 bearings - withstand heavy force and minimize friction, saving you up to 30% in physical exertion.
  • create an amazing cycling experience.Bearings are sealed to keep dust out.
  • ensure the best tread and simplify maintenance..
  • Screw thread design is not more easy to loose,more fitting and firm.To protect the riding more secure., Perfect for Upgrading or Replacing Old Pedals..
  • All fittings are made of exquisite CNC production and processing, let the pedals look more smooth and beautiful..
  • Use - BMX, Cruisers Bicycle, Kids' Bikes, Road Bicycles, MTB Bicycle, Mountain Bicycles, Junior Bicycle, CITY bicycle..
Check Stock