Categories

Best 3 Exhaust Pipe

Roadformer 3 Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 3" exhaust clamp is to joint 3" OD pipe overlapping into 3" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015

  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
  • 【Durable material】Exhaust Header Tube,It is made of high-quality stainless steel with a tapered tube with a thickness of 1 mm/0.04 inch. It is heat-resistant, high-temperature resistant, sturdy and not easily deformed, and has strong durability..
  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experi....
Check Stock

MacWork Tailpipe Cutter，Exhaust Tube Chain Cutter，Features Pipe Cutter Chain/Cutting Wheels，Black

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

Exhaust Tip 3.00" Inlet Dual 3.00 X 9.75 Long Round Double Wall Gloss Black 304 Stainless Steel WDWR300975-300-GBK-SS Wesdon Exhaust Tip

  • Exhaust Tip 3.00" Inlet Dual 3.00 X 9.75 Long Round Double Wall.
  • Weld On Style fits a 3.00 Exhaust Pipe 3.00 inlet.
  • 304 Stainless Steel High Gloss Black Powder Coated.
  • This is made to fit a 3.00” exhaust pipe. Please measure your exhaust pipe to make sure you have a 3.00” exhaust pipe outlet and that you have the room for it to fit..
Check Stock

Theia technical Tips&Electrode Harbor Freight Titanium 45 Plasma cutter 56576 56811 56255 40Amp (30)

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock

MOSTPLUS 28mm Exhaust Pipe Expander Stretcher Tool Set 1-5/8" to 4-1/4", Expander Tool for Tail Pipe Tube with Storage Case

  • [ Package Include ] --- 1 x Exhaust Pipe Stretcher Expander Kit & 1x Carry Case.
  • [ Material ] --- All collets are made of Aerospace-grade 6061 Aluminum, while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity then extended service life.
  • [ Function ] --- Used to expand the low-carbon steel exhaust pipe, and make the exhaust seal with a smaller diameter pipe.
  • [ Expanding Range ] --- The exhaust pipe stretcher offers various collets for a broad expansion range includes: Steel expander 1 5/8"-2" Collet.
  • [ Easy Opeartion ] --- Choose a proper collet, clamp the pipe, then expand the pipe. Use 1/2" or 3/4" impact wrench will save more effort.
Check Stock

VEVOR Pipe Stretcher Kit, Exhaust Pipe Stretcher Kit 1-5/8" to 4-1/4", Exhaust Pipe Expander Kit for Tail Pipe Tube, Exhaust Pipe Expander Tool w/Storing Case, 7 Pcs Pipe Expander, Exhaust Stretcher

  • Exhaust Pipe Stretcher Kit: This pipe stretcher kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters..
  • Wide Expanding Range: The exhaust pipe stretcher kit provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
  • Easy to Operate: You only have to lubricate all parts of the exhaust expander tool, and attach sleeves as needed, and then insert pipe spreader into the pipe, and finally connect to existing drill..
  • Heavy-duty Construction: All collets are made of Aluminum alloy ensuring rugged rigidity over an extended service life. The coated surface of the exhaust pipe expander kit provides rust resistance..
  • Convenient Storage: Blow-molded carrying case included for easy storing and convenie....
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Prokomon Exhaust Pipe Stretcher Kit 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Tool for Tail Pipe Tube

  • ◇ Heavy Duty Construction : All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..
  • ◇ The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders..
  • ◇ Wide Expandinig Range : The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1- 5/8" to 1-7/8" Collet ,Steel expander 2" to 2-1/2" Collet ,2-3/8" to 2-3/4" Collet ,2-3/4" to 3-1/8" Collet ,3-1/8" to 3-1/2" Collet ,3-1/2" to 3-7/8" Collet ,3-7/8" to 4-1/4" Collet.
  • ◇ Portable exhaust pipe expander tool, easy to use, suitable for most cars..
  • ◇ Used for expanding mild steel exhaust pipes to make perfect exhaust seals with smaller diameter piping..
Check Stock

OEMTOOLS 27045 Tailpipe Cutter, Features Pipe Cutter Chain w/ Cutting Wheels, Exhaust Pipe Cutter w/ Cushion Grips, Can Be Used as PVC Cutter or Copper Pipe Cutter

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock