Categories

Best 3 Inch Exhaust Band Clamps

BLACKHORSE-RACING 1.75 1 3/4 Accuseal Clamp Butt Joint Narrow Band Exhaust Seal Clamp

  • -- Size: Minimum Diameter: 1 3/4" (1.75").
  • -- Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized....
  • -- Seal exhaust band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique....
  • -- Save Time and Effort: Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is....
Check Stock

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

Roadformer 5" Butt Joint Exhaust Clamp - Aluminized Steel for 5 inch OD exhaust pipes, muffler ends and exhaust system connection with leakage free (2 Pack)

  • 2 PIECES IN PACKAGE – 5 inch butt joint exhaust clamp is made in high quality Aluminized Steel, it is used for 5 inch OD pipes & muffler ends connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, New design provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 560 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1-1/8\ ID hose, Range: 1.38\ - 1.57\ (316-SSTC-35-40)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 38" - 1. 57" (35mm-40mm).
  • Rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1.25\ ID Hose, Range: 1.5\ - 1.69\ (316-SSTC-38-43)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 5" - 1. 69" (38mm-43mm).
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 196, fit 6.75\ ID Hose, Range: 7\ - 7.31\ (316-SSTC-178-186)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 7" - 7. 31" (178mm-186mm). SAE # 196..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 108, fit 4\ ID Hose, Range: 4.25\ - 4.57\ (316-SSTC-108-116)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 4. 25" - 4. 57" (108mm-116mm). SAE # 108..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

EVIL ENERGY 2.0 Inch Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel

  • Size: joins 2.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
  • Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
  • Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 188, fit 6.5\ ID Hose, Range: 6.75\ - 7.06\ (316-SSTC-172-180)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 6. 75" - 7. 06" (172mm-180mm). SAE # 188..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 32, fit 1-5/8\ ID Hose, Range: 1.89\ - 2.2\ (316-SSTC-48-56)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 89" - 2. 2" (48mm-56mm). SAE # 32..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 48, fit 2-1/8\ ID Hose, Range: 2.38\ - 2.68\ (316-SSTC-60-68)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 2. 38" - 2. 68" (60mm-68mm). SAE # 48..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 2.5 Inch,2Pcs

  • Size: joins 2.5inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
  • Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
  • Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..
Check Stock