Superior Pump 91660 Tankless Water Heater Descaler Pump Kit with Non-toxic Descaler Solution 3.5 Gallon Deluxe
- Superior Pump 91660 Descaler Pump Kit is designed to clean and descale most Tankless Water Heaters.
- Descaler kit includes 1/6HP pump, Deluxe 3.5 gallon pail with screw top lid, two 3/4-inch GHT X 6-foot stainless steel hoses, and 7oz non-toxic....
- 1/6HP Thermoplastic utility pump moves up to 1920 Gal. per hour.
- Will pump up to 20-feet of vertical height.
- Includes 3/4-inch garden hose adapter for use with stainless steel hose.
- Non-clogging reinforced thermoplastic impeller.
- Bottom screen filters out debris and is easy....
Check Stock6699 Submersible Water Pump 1/4 HP 2000GPH Sump Pump Thermoplastic Electric Portable Transfer Water Pump with 16-Foot Cord for Pool Tub Garden Pond Draining
- 【Efficient Water Pump with Stable Performance】This item is constructed of high impact corrosion resistant plactic, 1/4 HP Sump pump moves up to 2000 gallons per hour tackles any draining job at a fraction of the time..
- 【Automatic Float Switch】Start/stop automatically. When water level is below 1-1/2 Inch inch, it will automatically disconnect the power.
- when water level rises above 7 inch, the pump will start again..
- 【Manual Water Pump】When the float switch is locked on the pump, the pump will work all the time and the power will not shut off automatically, cut off immediately when the pump fails to pump water to prevent from dry running..
- 【Easy to Connect Hose】 3 different diameters outlets (NPT 1-1/2 inch , GHT 3/4 inch, Dia. 1-1/2 inch) to adapter for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be. *This item is not suitable for working with expandable hoses..
- 【Application Occasions】Ideal for removing both clean/dirty water from any enclosing environment, such as cellars, reservoirs, rain barrel, flat roofs and more, but not for applications involving corrosive or flammable liquids. This sump pump with a suction screen at the bottom can whisk away water to 1-1/2 inc....
Check Stock6699 1HP Handy Utility Pump Submersible Water Pump 4500GPH High Flow to Remove Clean/Dirty Water for Swimming Pool Pond Hot Tub Flooded House Rain Barrel with Float Switch SUB 4500
- ...able Performance】This item is constructed of hi-impact corrosion resistant plastic, 1HP Sump pump moves up to 4500 gallons per hour tackles any draining job at a fraction of the time..
- 【Automatic Float Switch】 Start/stop automatically. When water level is below 1-1/2 Inch inch, it will automatically disconnect the power.
- when water level rises above 7 inch, the pump will start again..
- 【Manual Water Pump】When the float switch is locked on the pump, the pump will work all the time and the power will not shut off automatically, cut off immediately when the pump fails to pump water to prevent from dry running..
- 【Easy to Connect Hose】 3 different diameters outlets (NPT 1-1/2 inch , GHT 3/4 inch, Dia. 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be. *This item is not suitable for working with expandable hoses..
- 【Application Occasions】Ideal for draining both clean/dirty water from any enclosing environment, such as cellars, reservoirs, flooded basements, flat roofs and more, but n....
Check Stockmistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)
- ...isting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
- Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
- However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
- however, depending on package requirement it can be modified to 3/8 inch. - Scale free filters can also be added to mist systems to prevent clogging of nozzles due to hard water..
- Tubing - ¼ Inch OD Tube - Rated for 1500 PSI - Nylon Tubing - UV Treated - Available in Black, White, Beige and Grey Colors.
- Fittings - ¼ Inch - Push Lok – Push to Connect - Nickel Plated - Rated for 2000 PSI - Re-Usable - Misting Tee comes with 10/24 threads - End Plug – Simply connect it to the misting Tee. MC13040-MC13041.
Check StockUtilitech 0.5-HPAluminum Submersible Sump Pump
- 【Kindly Tip 1】When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape..
- 【Kindly Tip 2】The device is not suitable for continuous operation (e.g.as recirculation pump for ponds).This type of use will substantially shorten the pump's life expectancy..
- 【1HP High Power】Prostormer Sump Pump uses 1HP power, which is more efficient than ordinary 3/4HP sump pump.
- Max 3500GPH rating tackles any draining job at a fraction of the time..
- 【Multi Outlet Sizes】3 different diameters outlets (1 inch ,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be..
- 【Manual Mode】Set the switch to the MANUAL positon the pump will now not automatically switch off but carry out pumping, even if theremaining water level is reached and the pump runs dry. You should cut off the power immediately to prevent the coil from getting burned..
Check StockUS JACK D-51126 20 Ton Bottle Jack Made In USA
- OTC's 8-Ton Bottle Jack features a rugged forged cylinder and base to ensure strength and prevent leaks, along with a chromed pump piston and ram for additional rust resistance.
- In-line design (pump mechanism centered on the cylinder) makes the jack much easier operate and manuever into position with the handle compared to offset designs.
- Specifications include: 4-15/16 inch long stroke, 7-13/16 inch minimum retracted height, 15-3/4 inch maximum height with screw extension, 3 inch long screw extension.
- 1-3/8 inch diameter saddle, 3-9/16 inch x 6 inch rectangular base.
- OTC bottle jacks will provide years of reliable service, but eventally time and use will require new seals so every OTC bottle jack includes a free, life extending, seal kit.
Check StockSunnydaze Solar Pump and Solar Panel Kit with Battery Pack, Remote Control and LED Light, 65 GPH, 47-Inch Lift
- Up to 47-inch lift: Pump is 2.25 inches long x 1.5 inches wide x 1 inch tall.
- the solar panel is 9 x 7.5 x 1 inches, and it is connected to the pump via a 16-foot cord and placed in direct sunlight.
- Includes entire solar pump/panel kit: Each kit includes (1) 9V DC brushless pump with dry-run protection, (1) 3W solar panel with (1) 7.4V-2000 mAH Lithium battery, 3 sprinkler/shower spray heads, 1 small inverted cone spray head, (4) 2.25-inch extension tubes, 1 adapter, 1 ground stake, (1) 4-LED light ring, and 1 remote control with (1) 3V CR2032 battery.
- Runs in and out of the sun: Runs during the day in direct sunlight or a full battery pack charge can provide up to 4 hours of operation after the sun goes down.
- Lifts water through a 0.25-inch hose up to 47 inches.
- Remote control operation: Use the included remote control to operate the pump.
- Press "A" 1 time to set a 1-hour timer, twice for a 2-hour timer, 3 times for a 3-hour timer and 4 for a 4-hour timer.
- The "B" button turns the LED lights on/off.
- "C" controls the lift of the water which lifts water from 32, 36, 40, 44 up to 47 inches.
- Press "D" to turn the pump on without the timer or press turn off the pump.
- The pump needs to be off to charge the battery via the s....
Check Stockmistcooling 160PSI Misting Pump (220 V-AC)
- Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
- Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
- Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
- Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check StockLittle Giant 555110 115 Volt, 360 GPH Stainless Steel Non-Submersible Multi-Purpose Utility Water Transfer Pony Pump with 6-Ft. Cord and Plug, White, 360S
- PORTABLE UTILITY PUMP: 115 Volt stainless steel pump is ideal for water transfer or removal in and around the home.
- this pump is a non-submersible pump with a 6-ft. cord.
- DUAL THREADED INTAKE AND DISCHARGE: 3/4-inch male garden hose threading and 3/8-inch FNPT threading for use with 3/4-inch standard garden hose or 3/8-inch male threaded pipes.
- REPAIR KIT INCLUDED: includes two extra impellers and replacement gasket.
- installation instructions included in owner's manual.
- CORROSION-RESISTANT STAINLESS STEEL PUMP BODY: resists corrosion and is suitable for residential or industrial applications.
- 2.4 starting Amps, 360 GPH at 1-ft. lift.
Check StockMUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More
- The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
- The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
- Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
- Use included bolts and cover bolts to install the tool.
- Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
- The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stockmistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)
- Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
- Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
- Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
- Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
- Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check StockSHURFLO 4008-171-E65 115V 3GPM Revolution Pump
- SHURFLO REVOLUTION 4008 SERIES PUMP - SHURflo's New Revolution fresh water pump design was created with a unique one-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems.
- Designed as the next legendary pump to exceed the expectations of our customers, the Revolution pump is constructed for high fl ow demand, low noise and no rapid cycling.
- SHURflo's quality reputation has been built on the reliability and dependability of every pump we build.
- The Revolution fresh water automatic demand pump is super quiet, thermally protected and can run dry without damage.
- Dimensions: 4,90 inch x 8,10 inch x 4,30 inch.
Check StockFLUENTPOWER 3/4HP Sump Pump 3600GPH Stainless Steel Submersible Pump, Drain Clean/Dirty Water for Basement Flood Cellar Pool Pond Garden Hot Tub, Automatic/Continuous Manual Operation by Float Switch
- ⚙️【EASY TO INSTALL】Comes with three plastic adapters: GHT 3/4", NPT 1" and 1.5" male tread connectors. GHT 3/4"+NPT 1" connects standard garden hose for quickly installation. 1.5" male tread connects discharge hose for maximum output flow rate, this adapter has three different diameters outlets (Diameter 1 inch ,1-1/4 inch, 1-1/2 inch) to adapt for different size hoses as needed. ⭐ The bigger the flow is, the wider the outlet should be..
- ⚙️【BUY WITH CONFIDENCE】This pump is designed for multi applications and emergency use, like flooding basement, garden pond, hot tub, and so on. Provide lifelong technical consultation and 24h customer service. One-year manufacturer's warranty..
Check Stock