Categories

Best 3 L Powerstroke Intake Manifolds

94-97 Powerstroke 7.3 TP38 Turbo Cast Compressor Wheel DIY Upgrade Kit

  • Bigger 66/88mm cast compressor wheel provides much more airflow than stock 60/80mm compressor wheel and solves the commen surge problem.
  • Stepped Gap Ring eliminates oil leakage Problem.
  • 360 degree thrust bearing for performance applications.
  • Fit vehicle: 1994-1997 E&F Series with Powerstroke 7.3L diesel engine.
  • NOTE: You will need a 3.5″ intake hose to fit the new 3.5″ ported inlet Compressor Housing.
Check Stock

Oiled Cold Air Intake 7.3 Diesel Kit Air Intake Pipe With Oiled Filter Replacement For Ford F250 F350 F450 Super Duty 7.3L Powerstroke Diesel (1999.5-2000 2001 2002 2003)

  • Fits For 1999.5-2003 Ford F250 F350 F450 Super Duty 7.3L Powerstroke Diesel (2000 2001 2002 2003).
  • All the bends in our aluminum tubes are CNC mandrel bent and engineered for maximum air flow. Air intake pipe is polished and power coated black.
  • Premium Aluminum :This Cold Air Intake Pipe w/ Air Filter made of excellent aluminum alloy material, durable in use with high temperature resistant and corrosion..
  • Aluminum Construction won't crack like plastic and can holds up to the wide temperature extremes common in every engine compartment.
  • Package included: 1 Air Intake Pipe+1 Oiled Filter+1 Silicone Pipe+1 Mounting Bracket+4 Screws+3 O-shape washers, without instruction..
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • ...ed Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo-Ram | Product Type: Manifold.
Check Stock

SUPERCELL TP38 STAGE 2.5 Turbo Charger for 94-97 Ford Powerstroke 7.3L, 66/88 billet compressor wheel 3.5' Anti-Surge compressor Housing

  • Bigger 66/88mm billet compressor wheel can handle higher boost pressure and gain more air to the engine..
  • 1.10A/R ported Anti-Surge compressor housing with bigger 3.5″ air inlet..
  • Upgrade from Stock 270° to 360° Thrust Bearing System for better Lubrication..
  • Fit Vehicle: 1994-1997 Ford E&F Series Super Duty with Powerstroke 7.3L engine..
  • Note: You will need a need 3.5″ Intake Hose to fit the new 3.5″ Ported Inlet Compressor Housing!!!.
Check Stock

CAI Cold Air Inductions, Inc. 512-0104-B Cold Air Intake System 2015+ Colorado Canyon 3.6L V6 and 2.5L I-4, 2016-2022 Colorado, Canyon 2.8L Turbo-Diesel

  • The Sinister Diesel 2017-19 Powerstroke 6.7L cold air intake (CAI) feeds your engine more air than the factory intake. Improved throttle response and turbo spool-up come from this cold air intake, enhancing performance in daily driving, towing and even racing applications!.
  • Precision CNC Mandrel Bent Aluminum Tubing for a Perfect Fit.
  • Oversized Long Lasting Reusable Cotton Filter Media.
  • Significantly Improved Throttle Response and Turbo Spool-up.
  • Polished and Powder Coated in our Signature Sinister Blue.
Check Stock

JEM&JULES Carburetor Intake manifolds CX500 w/boots gaskets for Honda Carb Holders kit

  • ★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fitment: for 1978-1979 Honda CX500 1979-1982 Honda CX500C 1979-1981 Honda CX500D.
  • ★Intake boots become dried out and cracked over time causing air leaks which lead to lean running engines that prematurely fail. Replaces dried out, cracked intake manifolds that can cause engine failure. Give your machine the new power and torque it really deserves, and have more fun with the power at your finger tips..
  • ★Please check pictures for more details, and check your part number and our fitment before placing an order.
  • ★1 set of 2 Brand new Aluminum carb manifolds rubber boots and orings (1 BID = SET OF 2 HOLDERS).
Check Stock

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

Small Block Chevy Intake Manifold SBC Vortec Dual Plane 350 383 Intake Manifold 1996-UP Black

  • The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,500 rpm..
  • Engine Make/Size:Chevy Small Block (350,383 1997-up).
Check Stock

BLACKHORSE-RACING Diesel Turbo 466057-5005 GTP38 Compatible with 1994 1995 1996 1997 Ford F-Series Trucks 7.3L Powerstroke

  • ▲Directly fit 94-97 Ford F-Series Trucks 7.3L Powerstroke Diesel.
  • ▲Turbo OE Number:1822702C92, 1825818C91,  1822869C91,  1822775C92, 1822869C92,  1820612C91,  1822775C92,  991822C92,  991824C92.
  • ▲Turbo Part Number:466057-0005,  466057-5005,  466057-5005S,  466057-5,  466163-0011, 466163-5011S,  466163-11,466163-0013, 466057-0006, 466057-9006.
  • ▲Compatible with 1994 - 1997 Ford F Super Duty 7.3L Powerstroke Diesel Engine.
  • 1994 - 1997 Ford F-350 Duty 7.3L Powerstroke Diesel Engine.
  • 1994 - 1997 Ford F-250 Duty 7.3L Powerstroke Diesel Engine.
  • 1994 - 1997 Ford Pick-up Truck 7.3L Powerstroke Diesel Engine.
  • 1994 - 1997 International All Models Navistar T444E Engine with Garrett Number 466057-5005.
Check Stock

Exhaust Bellows Replace Mercruiser 3-4' 70981A3 Sierra 18-2762 Mallory Marine 9-72808

  • Upper Exhaust Bellows for Mercruiser 3-4" 70981A3 3.0 3.7 5.0 5.7 18 2762 89070.
  • 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
  • After market Ref:Mercruiser:70981A3,Mallory Marine: 9-72808,Sierra: 18-2762,GLM: 89070.
  • Installs on to 3 inch 15 degree center mounted risers with 4 inch elbow.
  • used: 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
Check Stock

SNIPER 870021 MAP Sensor 2.5-Bar EFI Fabricated Intake Manifolds

  • Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with LS1/LS2/LS6 cathedral port heads. Improves throttle response, torque and airflow..
  • Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow for tuning of power band..
  • The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency. The Lexar uses advanced polymer materials to cool intake temps for increase airflow and engine efficiency..
  • Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar features a sleek black finish, FAST logo with an option to add billet fuel rails. The Big Mouth Throttle Body features a slick natural billet aluminum finish..
Check Stock

A-Premium Upper Intake Manifold with Gaskets Compatible with Ford Crown Victoria 96-00, Mustang 96-98, Thunderbird 96-97 & Lincoln Town Car 96-00 & Mercury Grand Marquis 96-00, Cougar 96-97, 4.6L V8

  • [Vehicle Fitment-1 ]: Compatible with Ford Crown Victoria 1996-2000 V8 4.6L (8th Vin Digit 6, 9, W).
  • Mustang 1996-1998 V8 4.6L (8th Vin Digit X).
  • Thunderbird 1996-1997 V8 4.6L (8th Vin Digit W).
  • [Vehicle Fitment-2]: Compatible with Lincoln Town Car 1996-2000 V8 4.6L (8th Vin Digit W).
  • Mercury Grand Marquis 1996-2000 V8 4.6L (8th Vin Digit 6, W).
  • Mercury Cougar 1996-1997 V8 4.6L (8th Vin Digit W).
  • [Reference Number]: F6SZ 9424-AA, F8AZ 9424-AAA, F8AZ 9424-BAA, F8AZ 9424-BC, F8AZ 9424-CA, F8AZ 9424-CB, 615-178.
  • [Specifications]: ①Manifold Height (in): 8.0 in ②Material: Plastic.
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this Upper Intake Manifolds Kits is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

FAST LSXr 102mm LS1/2/6 Intake Manifold + 102mm Big Mouth Billet Throttle Body Kit

  • Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with....
  • Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow....
  • The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency.....
  • Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar....
Check Stock