Categories

Best 3 Roll Press Brake

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

ABN Caliper Piston Compressor Tool 16-pc Pneumatic Brake Caliper Tool Air Brake Tools Brake Caliper Compressor Tool

  • MAKE BRAKE JOBS EASY: Use the ABN Brake Compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4-inch air hose adapter to simplify brake jobs.
  • Choose an adapter, connect your existing shop air line, press pressure button and rotating lever to wind back brake piston, press release button, and pull rotating lever to move push piston axle backwards for dismounting tool caliper.
  • FITS YOUR VEHICLE: Drive key adapters for GM, Citroen XM & Zantia, Citroen CXM, Citroen C5, Alfa Romeo, Alfa Romeo 164 2.0 Saab 9000, Audi, Audi 80/90 & V8, BMW, Ford, Honda, Honda Prelude Isuzu, Jaguar, Jaguar XI40, Mercedes, Mitsubishi, Nissan, Nissan Bluebird, Nissan Silvia, Nissan Maxima Rover, Toyota, Toyota Celica & Corolla GR & MR2, Volkswagen (VW), VW Golf/Pas-Sat Corrado/GTX 16V/Scirroco, Volvo, Mazda 323.626, Primera 2.0L VW Golf IV, Rover 800, Subaru L & 2 Series, Opel, Ford Mondeo.
  • BUILT TO LAST: Pneumatic body constructed from solid heat-treated cast anodized aluminum.
  • Moving parts constructed from chrome alloy steel (chrome finished rotating lever, phosphate finished holder, and anodized aluminum handle).
  • Each adapter is permanently etched with size for quick i....
Check Stock

DASBET 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer

  • Function: The ball joint press removal tool with four wheel drive adapter allows easy removal of crimped parts including ball joints, universal joints, brake fixing pins, etc. You don't need to remove the control arm from the vehicle at all during operation, improving work efficiency..
  • Durable Structure: The ball point press kit is made of heavy forged steel with black oxide finish adapters.The ball joint service auto tool kit has great strength and service life, while rust and corrosion resistant.And the ball joint separator tool can withstand long-term and massive use..
  • Easy to Operate: The ball joint service auto tool kit is ideal for removing/installing vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed. .
  • Wide Compatibility: The ball joint press & U joint removal tool kit is suitable for most two wheel drive (2WD) and four whee....
Check Stock

SWAG Off Road 50\ Press Brake DIY Builder Kit With Adjustable Back Stop.

  • Press Brake Kit comes Unassembled, you do the final assembly and welding..
  • Constructed out of high strength 3/8" steel with a 1.0" x 4.0" thick top die and 3.0" wide bottom die..
  • This universal press brake kit will bend steel up to 49" wide..
  • Designed to fit in hydraulic presses that are at least 52" wide, but can easily be cut down..
Check Stock

35.4\ Electric Skateboard for Adults with Remote Control 12 MPH Top Speed 350W Motor 8 Layers Maple Electric Longboard Max Load 220 Lbs E-Skateboard (Black)

  • ...now the battery level of the skateboard at any time.An ergonomic wrist strap for the electric skateboard remote controller helps to prevent dropping.The remote range can max reach up to 47.2inch.You can easily control the skateboard..
  • CRUISE MODE CONTROL ---- Keep the speed you want for 3 seconds,and then short press the remote power button,the skateboard will enter cruise mode.Re accelearte, brake or press the remote power button to exit the cruise mode..
  • SPEED LEVEL CONTROL ---- Roll the remote spped wheel to apply brake,and press the remote speed mode toggle to change the speed level from Low to Medium or High..
  • PAY ATTENTION ---- The lithium battery is easy enter the self-protection state and it can't be charged if the lithium battery is not charged and discharged for a long time.It is recommended the lithium battery should be charged and discharged at least once a month.Full charge as possible when store it..
Check Stock

hikotor Flexible 25 Feet 3/16 Inch Copper Coated Alloy Brake Line Tubing Kit with 16 Inverted Flare Fittings SAE Standard for Hydraulic Fuel Transmission System

  • SUPER FLEXIBLE - Uses professional technology, the tube roll owns perfect flexibility for easy bending and flaring, no tools needed.
  • In addition, 0.028" wall thickness assures it not easy broken off.
  • PREMIUM QUALITY - The brake tube is made from heavy duty Copper coated steel line, rust resistant and long lating.
  • With SAE and ISO approved, the thread provides you guarantee all year around.
  • PRIME CHOICE - Provides an easiness to work with and high-end brake line replacement option for professionals and do-it-yourselfers.
  • Ideal for vehicles experiencing harsh weather and environmental conditions.
  • COMPLETE KITS - The package includes 1 x replacement brake line and 16 x most common inverted tube nut: 2 x 3/16” (7/16-24) nut, 10 x 3/16” (3/8-24) nut, 2 x 3/16” (1/2-20) nut, 2 x 3/16” (9/16-18) nut.
  • WIDE APPLICATION - The brake line kit works great on hydraulic braking systems, fuel systems, transmission Systems, etc.
  • Also commonly fits to household, industrial, commercial uses and more.
Check Stock

THOROAD Brake Caliper Press Tool, Brake Caliper Compression Tool,Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates (Red)

  • 【】THOROAD Brake Caliper Press Tool uses high quality spreading plates with 1/8" thickness steel,corrosion resistance, economical and practical, with long service life. The ratchet brake piston is equipped with 2 additional steel plates. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor..
  • 【】THOROAD Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. Ratchet technology provides 360 degree full rotation so that the spreader can be placed in any position. The centering ratchet screw produces a uniform force as it compresses the piston to ensure proper alignment and prevent damage to the brake assembly..
  • 【 】THOROAD brake caliper compression tool ideal for most large trucks and commercial vehicles with quad piston calipers.Easy to install, easy to remove. Ratchet technology gives a full 360-degree swing so that the spreader may be placed at any position.Suits for disc brake, NOT for drum brake..
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

BIGTUR Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates/2 pcs Hangers

  • ...car parts while the brakes are being repaired..
  • Easy to use: Ratchet technology gives a full 360° swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”.
  • High quality:Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip..
  • Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers..
  • Professional after-sales team: All kits are provided with lifetime technical support and one-year limited warranty.If there is any problem during the purchase period, please contact us at any time, and we will provide the most professional and timely service..
Check Stock

KHTD Brake Fluid Tester Pen, Auto Brake Diagnostic Testing Tool with 5 LED Lights, Compatible with DOT3 DOT4 DOT5.1 Brake Fluid

  • CONVENIENT TOOL: This brake fluid tester pen shape design is a very small and convenient tool to test the moisture of your auto brake fluid. Simply press the button at the top, dip the probe the Testing the water content of your brake fluid dot 3, dot 4 and more will only take few seconds..
  • MULTIPLE TESTING TYPE: The dot 3 brake fluid tester can also be uses for testing the fluids of DOT4, DOT5.1, ENV6 & ENV4. With this one automotive brake fluid tester, you can finish different jobs..
  • EASY TO READ: With the percentage readings next to the LED lights on the brake fluid tester pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing..
  • PREMIUM QUALITY: This pen brake fluid tester is made of premium nylon raw material more durable to use. （1 AAA battery needed for use, not included in the Pack).
  • QUICK RESPONSE: we are committed to offer good products as well as good services. Feel free to contact us if you have any problems.
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ✔【Sturdy Material】: Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, not easy to deform, durable for long time use. Ergonomically designed reinforced handle, efficient, Comfortable & non-slip. Perfect Father's Day Gift.
  • ✔【Universal Disc Brake Caliper Pistion Tool】: Brake piston caliper is equipped with 2 large push plates and 2 brake caliper hooks. The larger plate is fixed in place by built-in powerful magnets and cylindrical pins for easy and quick installation and removal. The hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair..
  • ✔【Easy to Operate】: Brake Pistion press tool adopts 360° ratchet design, which can be used in any direction. Centrally located ratchet evenly spreads force in a parallel manner when compressing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for mos....
Check Stock

25Ft 3/16 Copper-Nickel Coated Alloy Brake Line Tubing Coil Kit Tube Roll with 16 Fittings

  • 25 Ft Roll x 3/16" copper-nickel alloy COATED OD Zinc plated steel brake line tubing with 16 assort fittings..
  • It won't rust, corrosion resistance, extremely easy to bend by hand and flare by simple tools..
  • The brake line is very flexible and very easy to bend and flaring to mount - you can manually bend our brake lines without the need for a bending tool.
  • It includes SAE flare Nuts and meets relative international standards..
  • With superior durable material and great performance for longer use..
Check Stock

HauSun Brake Caliper Press Tool - 360 Degree Car Adjustable Ratchet Piston Spreader Tools Set for Single Twin Quad Piston Disc Brake Repair Replacement

  • 【Main Function】This Brake Caliper Press is professional for automotive brake caliper piston adjustment. Works on single, twin and quad pistons,as well as single and twin piston floating calipers..
  • 【360° Ratchet】Brake Repair Brake Spreading Tools adopts a full 360 degree swing ratchet design so that the spreader may be placed at any position. And your hands will not get fatigued from the constant squeezing..
  • 【Easy to Use】This Brake Caliper Piston Expander is very easy to operate. Swing the long lever handle to expand and retract the two spreading plates, and the positive and negative regulation is realized by flipping the reversing switch on the ratchet..
  • 【Sturdy Material】This Brake Caliper Compressor is constructed of heavy duty carbon steel. The spreading plates with 1/8" thickness steel, high strength, not easy to deform..
  • 【Product Size】This Brake Caliper Press Tool is a must-have tool for doing brake pad replacement, changing the brake, resetting the piston, and doing other brake works .Fully retracted: 1.57”, Fully expanded: 2.72”.
Check Stock